Module ZigBee Pair-connection 6 kênh DI + 4 kênh Relay DO ICP DAS ZT-2060-IOG

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

ZT-2060-IOG CR ZigBee I/O Group (Pair-connection) Module with the 6-channel Isolated Digital Input and 4-channel Relay Output (Full-function) (RoHS)

Gọi 0904251826 để được trợ giúp

Module ZigBee Pair-connection 6 kênh DI + 4 kênh Relay DO ICP DAS ZT-2060-IOG


  • ISM 2.4 GHz Operating Frequency

  • Fully Compliant with 2.4G IEEE 802.15.4 / ZigBee Specifications

  • Supports AES-128 Encryption for the Wireless Communication

  • Wireless Transmission Range up to 700 m (Default)

  • Adjustable RF Transmission Output Power

  • Physical Pair-connection Channels of 6 Digital Input and 4 Relay Output

  • 280 Logical Pair-connection Channels Supported

  • Configurable I/O Pairing Relationship

  • DO Safe Value Setting for Wireless Disconnection Monitoring

  • Surge and ESD Protection

  • DIN-Rail Mountable


ZT-20xx-IOG series (referred to as ZT-IOG) is a series of ZigBee wireless communication module with Digital Input and Digital Output channels. The “IOG” in the ZT-IOG is the abbreviation for the I/O Group and means the multi-to-multi Pair-connection I/O modules.

The ZT-2060-IOG module is one of the ZT-20xx-IOG series that provides both 6 digital input channels and 4 relay output channels. User can easily configure it as either a ZigBee Coordinator or a ZigBee Router via the external switches.

The ZigBee Coordinator will serve as a message processing and distribution center. In other words, as long as any DI of any ZT-IOG module changes its channel state, it will immediately trigger an event and upload it to the ZigBee Coordinator for I/O updating logic calculations to determine the DO output states of the ZT-IOG system. Then, the ZigBee Coordinator will broadcast a message periodically to all ZT-IOG ZigBee Router modules for synchronizing all DO channel states to achieve the multi-to-multi I/O Pair-connection function.

I/O Specification

Digital Input

Input Channels


Input Types

Isolated, Wet Contact (Sink/Source)

Input Level

On Voltage Level

+3.5 VDC ~ +30 VDC

Off Voltage Level

Max. +1 VDC

Input Impedance

3 kΩ, 0.33 W

Relay Output

Output Channels


Output Types

Power Relay, Form A

Contact Rating

5 A @ (250 VAC/30 VDC)

Max. Contact Voltage

270 VAC/125 VDC

Release Time

Max. 5 ms at Rated Voltage



Resistive Load: 100,000 ops. min. (10 ops/minute)


At No Load: 20,000,000 ops. min. (300 ops/minute)

Insulation Resistance

Min. 1000M Ω at 500 VDC

Surge Strength

5,080 V (1.2 / 50us

System Specification

Communication Interface

Wireless Standards

ZigBee 2007 Pro

Transmission Power

11 dBm (Default, FCC Certificated); Max. 19 dBm

2.4 GHz Antenna

5 dBi Omni directional

Transmission Range (LoS)

700 m (Typical)

Max. Slaves in a ZigBee Network


LED Indicators


1 LED, Red

ZigBee Communication

1 LED, Green

Digital Input and Output

6 Green LEDs for Digital Input
4 Red LEDs for Relay Output


Intra-module Isolated, Field-to-Logic

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

4 kV Contact for Power Line, Communication Line and each Channel, 8 kV Air for Random Point

EFT (IEC 61000-4-4)

4 kV for Power Line


Input Voltage Range

+10 VDC ~ +30 VDC

Power Consumption

Max. 1.4 W



Fire Retardant Materials (UL 94V-0 Level)

Dimensions (L x W x H)

94 mm x 33 mm x 110 mm




Operating Temperature

-25 ~ +75°C

Storage Temperature

-30 ~ +80°C

Relative Humidity

10 ~ 90% RH, Non-condensing



Data sheet



Odering information

ZT-2060-IOG CR

ZigBee I/O Group (Pair-connection) Module with the 6-channel Isolated Digital Input and 4-channel Relay Output (Full-function) (RoHS)

Important Note: If there is any requirement to do the advanced configuration, please remember to order at least one ZT-USBC or ZT-2570 ZigBee converter.

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: