Module ZigBee Pair-connection 8 kênh DI + 8 kênh DO ICP DAS ZT-2055-IOG
Features
-
ISM 2.4 GHz Operating Frequency
-
Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
-
Supports AES-128 Encryption for the Wireless Communication
-
Wireless Transmission Range up to 700 m (Default)
-
Adjustable RF Transmission Output Power
-
Physical Pair-connection Channels of 8 Digital Input and 8 Digital Output
-
280 Logical Pair-connection Channels Supported
-
Configurable I/O Pairing Relationship
-
DO Safe Value Setting for Wireless Disconnection Monitoring
-
Surge and ESD Protection
-
DIN-Rail Mountable
Introduction
ZT-20xx-IOG series (referred to as ZT-IOG) is a series of ZigBee wireless communication module with Digital Input and Digital Output channels. The “IOG” in the ZT-IOG is the abbreviation for the I/O Group and means the multi-to-multi Pair-connection I/O modules.
The ZT-2055-IOG module is one of the ZT-20xx-IOG series that provides both 8 digital input channels and 8 digital output channels. User can easily configure it as either a ZigBee Coordinator or a ZigBee Router via the external switches.
The ZigBee Coordinator will serve as a message processing and distribution center. In other words, as long as any DI of any ZT-IOG module changes its channel state, it will immediately trigger an event and upload it to the ZigBee Coordinator for I/O updating logic calculations to determine the DO output states of the ZT-IOG system. Then, the ZigBee Coordinator will broadcast a message periodically to all ZT-IOG ZigBee Router modules for synchronizing all DO channel states to achieve the multi-to-multi I/O Pair-connection function.
I/O Specification
|
Digital Input |
|
Input Channels |
8 |
|
Wet Contact (Sink/Source) |
On Voltage Level |
+10 VDC ~ +50 VDC |
|
Off Voltage Level |
Max. +4 VDC |
|
Dry Contact (Source) |
On Voltage Level |
Close to GND |
|
Off Voltage Level |
Open |
|
Input Impedance |
10 KΩ |
|
Intra-module Isolation, Field to Logic |
3750 VDC |
|
Overvoltage Protection |
±70 VDC |
|
Digital Output |
|
Output Channels |
8 |
|
Output Types |
Isolated Open Collector |
|
Sink/Source (NPN/PNP) |
Sink |
|
Load Voltage |
+3.5 ~ 50 VDC |
|
Max. Load Current |
650 mA/Channel |
|
Overvoltage Protection |
60 VDC |
|
Overload Protection |
1.4 A (with short-circuit protection) |
System Specification
|
Communication Interface |
|
Wireless Standards |
ZigBee 2007 Pro |
|
Transmission Power |
11 dBm (Default, FCC Certificated); Max. 19 dBm |
|
2.4 GHz Antenna |
5 dBi Omni directional |
|
Transmission Range (LoS) |
700 m (Typical) |
|
Max. Slaves in a ZigBee Network |
255 |
|
LED Indicators |
|
Power |
1 Red LED, ZigBee Device Power Indicator |
|
ZigBee Communication |
1 Green LED, ZigBee Communication Indicator |
|
Digital Input and Output |
8 Green LEDs for Digital Input
8 Red LEDs for Digital Output |
|
Isolation |
|
Intra-module Isolated, Field-to-Logic |
2500 VDC |
|
EMS Protection |
|
ESD (IEC 61000-4-2) |
4 kV Contact for Power Line, Communication Line
and each Channel, 8 kV Air for Random Point |
|
EFT (IEC 61000-4-4) |
4 kV for Power Line |
|
Surge |
3 kV for Power Line |
|
Power |
|
Input Voltage Range |
+10 VDC ~ +30 VDC |
|
Power Consumption |
Max. 2.5 W |
|
Mechanical |
|
Flammability |
Fire Retardant Materials (UL 94V-0 Level) |
|
Dimensions (L x W x H) |
96 mm x 33 mm x 110 mm |
|
Installation |
DIN-Rail |
|
Environment |
|
Operating Temperature |
-25 ~ +75°C |
|
Storage Temperature |
-30 ~ +80°C |
|
Relative Humidity |
10 ~ 90% RH, Non-condensing |
Download
Manual
Data sheet
Software
Certification
Odering information
|
ZT-2055-IOG CR |
ZigBee I/O Group (Pair-connection) Module with the 8-channel Isolated Digital Input and 8-channel Isolated Digital Output (Full-function) (RoHS) |
|
Important Note: If there is any requirement to do the advanced configuration, please remember to order at least one ZT-USBC or ZT-2570 ZigBee converter. |
