Module Zigbee 8 kênh đầu vào tương tự kết nối Modbus RTU & DCON ICP DAS ZT-2017

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

ZT-2017 CR Wireless 8-channle Analog Input Module with High Voltage Protection (ZigBee Router) (RoHS)

Gọi 0904251826 để được trợ giúp

Module Zigbee 8 kênh đầu vào tương tự kết nối Modbus RTU & DCON ICP DAS ZT-2017

Features

  • ISM 2.4 GHz Operating Frequency
  • Fully Compliant with 2.4 G / ZigBee Specifications
  • Wireless Transmission Range up to 700 m
  • GUI Configuration Software (Windows Version)
  • 8 Differential Analog Input Channels (mV, V)
  • Individual Channel Configuration
  • Overvoltage Protection up to 240 Vrms
  • ±4 kV ESD Protections (Conact for each Terminal)
  • DIN-Rail Mounting

Introduction

The ZT-2017 is a wireless 16-bit, 8-channel differential analog input ZigBee module that provides a programmable input range on all analog channels (±150 mV, ±500 mV, ±1 V, ±5 V or ±10 V). Each analog channel can be configured for an individual input range and has a high 240 Vrms overvoltage protection. Users can easily to configure the module address, protocol, checksum, ZT-PID, ZT-channel and type code settings using a combination of rotary and DIP switches.

Application

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.

System Specification

Communication Interface
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated) (Max. 19 dBm)
Antenna 2.4 GHz - 5 dBi Omni-directional Antenna
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Max. Slaves in a ZigBee Network 255
ZB-100R/ZB-100T Support -
Protocols Supports DCON and Modbus RTU Protocols
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators
Power 1 LED, red
ZigBee Communication 1 LED, green
Power
EMS Protection ESD, Surge, EFT
Input Voltage Range +10 VDC ~ +30 VDC
Power Consumption Max. 1.4 W
Mechanical
Flammability Fire Retardant Materials (UL 94V-0 Level)
Dimensions (L x W x H) 87 mm x 33 mm x 110 mm
Installation DIN-Rail
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Relative Humidity 10 ~ 90% RH, Non-condensing

I/O Specification

Analog Input
Input Channels 8 Differential
Input Types ±10 V, ±5 V, ±1 V, ±500 mV, ±150 mV ±20 mA, 0 ~ 20 mA, ±20 mA, 0 ~ 20 mA or 4 ~ 20 mA
(Current Input Requires Optional External 125 Ω Resistor)
Resolution 16-bit
Sampling Rate 16-bit, 10 Samples/Sec. (Total)
Accuracy ±0.1% of FSR
-3dB Bandwidth 15.7 Hz
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB
Input Impedance >2 MΩ
Overvoltage Protection 240 Vrms
Individual Channel Configuration Yes
Intra-module Isolation, Field-to-Logic 3000 VDC

Download

Manual

Data sheet

Quick Start

Certification

Odering information

ZT-2017 CR Wireless 8-channle Analog Input Module with High Voltage Protection (ZigBee Router) (RoHS)
Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a ZT-2550, ZT-2570, or ZT-USBC ZigBee host converter when you purchase ZigBee Data Acquisition products.

Accessories

MDR-20-24 24 VDC/1.0 A, 24 W Power Supply with DIN-Rail Mounting
ZT-2510 CR ZigBee Repeater (RoHS)
ZT-2550 CR RS-485/RS-232 to ZigBee Converter (Host)
ZT-2570 CR Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS)
External Antenna 2.4GHz External Antenna, RP SMA Male (Plug)
Extension Cable 3S00x-1, RG58A/U x Meter Long RP-SMA (male) to RP-SMA (female)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: