Bộ lập trình nhúng WinPAC CPU Cortex-A8, 1.0 GHz + OS CE 7.0 Win-GRAF + 1 I/O Slot ICP DAS WP-8128-CE7

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

WP-8128-CE7 Win-GRAF based WinPAC-8000-CE7 with 1 I/O Slot

WP-8428-CE7 Win-GRAF based WinPAC-8000-CE7 with 4 I/O Slots

WP-8828-CE7 Win-GRAF based WinPAC-8000-CE7 with 8 I/O Slots

Gọi 0904251826 để được trợ giúp

Bộ lập trình nhúng WinPAC CPU Cortex-A8, 1.0 GHz + OS CE 7.0 Win-GRAF + 1 I/O Slot ICP DAS WP-8128-CE7


  Cortex-A8, 1GHz CPU
  512 MB DDR3 and 256 MB Flash
  Windows CE 7.0 Professional
  Embedded Win-GRAF SoftLogic (IEC 61131-3)
  Hard Real-Time Capability
  VGA Port Output
  Modbus RTU/TCP (Master, Slave)
  Support eLogger HMI
  Redundant Power Inputs
  Operating Temperature: -25 ~ +75 °C


The Win-GRAF WinPAC-8000-CE7 Series (WP-8128-CE7/8428-CE7/8828-CE7) is the new generation Windows CE 7.0 based PAC (Programmable Automation Controller) of ICP DAS. Each WP-8000-CE7 is equipped with a Cortex-A8 (1.0 GHz) CPU running a Windows CE 7.0 operating system, a variant of input/output ports (VGA, USB, Ethernet, RS-232/485), and 1/4/8 expansion I/O slots that can be used to integrate high performance I-8K (parallel-type) and I-87K (serial-type) series I/O modules.

The benefits of running Windows CE 7.0 on a WinPAC device include hard real-time capability, achievable deterministic control and allowing PAC can have a PC-like window displays and operating environment. The WP-8xx8-CE7 series PACs are capable of running Win-GRAF (IEC 61131-3 Standard) software to develop logic control applications, and also supporting M.S. VS 2008 software (VB .NET, C#) to develop HMI and data management applications that can exchange data with Win-GRAF applications. So the application's design is more convenient and more practical.

Windows Embbed CE7

CE7 is a compact and hard real-time OS used to quickly create time critical and high performance applications. Using CE7 gives an ability to run PC-based control software such as Visual Basic .NET, Virtual C#, SCADA software, SoftPLC, etc.

  • FTP Server
  • Web Server
  • Telnet server
  • Visual Studio.NET


Win-GRAF is a powerful, PLC-like, softlogic development software. It is installed on PC with windows 7 or 8. It supports the international PLC language standard - IEC 61131-3 - Ladder Diagram (LD), Function Block Diagram (FBD), Sequential Function Chart (SFC), Structured Text (ST), Instruction Set (IL), suitable to develop applications for the full range of Win-GRAF PACs from ICP DAS.

IEC 61131-3 Standard Open PLC Syntax (LD, FBD, SFC, ST, IL)
 Using ST Syntax in the FBD or LD Program
 Event Triggered Data Binding (Exchange Data between PACs)
 On Line Debug/Control/Monitor, Off Line Simulation
 On Line Change
 Various Protocols:
    - Modbus TCP/UDP, Modbus RTU/ASCII Master
    - Modbus TCP, RTU Slave
    - DCON ...
 Plenty of Functions, Function Blocks, I/O Boards
Redundancy (For XP-8xx8-CE6 PAC only)

PAC Specification

Models WP-8128-CE7 WP-8428-CE7 WP-8828-CE7
System Software
OS Windows CE 7.0
.Net Compact Framework 3.5
Embedded Service FTP server, Web server (supports VB script, JAVA script), Embedded SQL server
Multilanguage Support English, German, French, Spanish, Russian, Italian, Korean, Simplified Chinese, Traditional Chinese
Development Software
Win-GRAF Software Win-GRAF IEC 61131-3 standard
Languages LD, ST, FBD, SFC, IL. Support eLogger HMI : WP-8xx8, WP-5xx8-CE7, WP-8xx8-CE7, 
XP-8xx8-CE6, WP-9xx8-CE7 and VP-x2x8-CE7 PAC.
Max. Code Size 2 MB
Scan Time 3 ~ 15 ms for normal program
15 ~ 50 ms for complex or large program
Non-Win-GRAF Options: VS.NET 2008 (VB.NET, C#.NET, C)
CPU Module
CPU Cortex-A8 (1.0 GHz)
Flash 256 MB
Memory Expansion microSD socket with one microSD card (support up to 32 GB)
RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
64-bit Hardware Serial Number Yes, for Software Copy Protection
Dual Watchdog Timers Yes
Programmable LED Indicator 1
Rotary Switch Yes (0 ~ 9)
DIP Switch - Yes (8 bits) Yes (8 bits)
VGA & Communication Ports
VGA 800 x 600, 1024 x 768
Ethernet RJ-45 x 2, 10/100/1000M Base-TX
USB 2.0 2
COM0 Internal communication with the high profile I-87K series modules in slots
COM1 RS-232 (RxD, TxD and GND); Non-isolation
COM2 RS-485 (Data+, Data-) with internal self-tuner ASIC; 3000 VDC isolated
COM3 - Yes Yes
(RxD, TxD, CTS, RTS and GND for RS-232; Data+ and Data- for RS-485); non-isolated
COM4 - Yes Yes
RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated
I/O Expansion Slots
Slot Number 1 4 8
Note: For High Profile I-8K and I-87K Modules Only
Dimensions (W x L x H) 95 mm x 132 mm x 111 mm  231 mm x 132 mm x 111 mm 355 mm x 132 mm x 111 mm
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Ambient Relative Humidity 10 ~ 90 % RH (non-condensing )
Input Range +10 ~ +30 VDC
Isolation 1 kV
Redundant Power Inputs Yes, with one power relay (1 A @ 24 VDC) for alarm
Capacity 1.0A, 5V supply to CPU and backplane, 0.6A, 5V supply to I/O expansion slots, total 8 W 1.1A, 5V supply to CPU and backplane, 4.9A, 5V supply to I/O expansion slots, total 30 W 1.2A, 5V supply to CPU and backplane, 4.8A, 5V supply to I/O expansion slots, total 30 W
Power Consumption 7.3 W (0.3 A @ 24 VDC) 9.1 W (0.38 A @ 24 VDC) 9.6 W (0.4 A @ 24 VDC)

Win-Graf Specification

Protocols (Note that certain protocols require optional devices)
NET ID 1 ~ 255, for Modbus TCP/RTU Slave, user-assigned.
Modbus TCP Master A max. of 32 IP links to access/control the devices supporting Standard Modbus TCP Slave protocol.
Modbus RTU/ASCII Master A max. of 36 ports: COM1 ~ 37 (*) to connect other Modbus Slave devices(Like M-7000).
Recommend connecting no more than 32 devices in each port for better scan rate.
Modbus RTU Slave A max. of 16 ports: COM1 ~ 37 (*) for connecting SCADA/HMI/OPC Server.
Modbus TCP Slave Two Ethernet ports (LAN1 & LAN2) support up to 32 connections. If the PAC uses 1 connection to connect each PC/HMI, it can connect up to 32 PCs/HMIs; If the PAC uses 2 connections to connect each PC/HMI, it can connect up to 16 PCs/HMIs; If one of the Ethernet port malfunctions, the other one can still be used to connect the PC/HMI.
User-defined Protocol Custom protocols can be applied at COM1~ 37 (*) by using Serial communication functions or function blocks.
DCON Remote I/O A max. of 16 RS-485 ports: COM1 ~ 37 (*). Each port can connect max. 50 nos I-7000 series modules or 
50 nos I-87xxxW I/O modules in expansion units (I-87K4, I-87K8, I-87K9, RU-87P8, RU-87P4).
Recommend connecting no more than 32 modules in each port for better scan rate.
Local I/O Modules Supports only high profile I/O modules. Slot 0~7 supports I-8xxxW parallel I/O modules and I-87xxxW serial I/O modules. (Refer Optional I/O List)
App Protection Using the unique 64-bit (8 bytes) PAC serial number to generate a protection password by your own algorithm to protect your Win-GRAF application. Then, if someone intend to copy your application in the PAC to another new PAC with the same PAC model, this application will not work properly in that new PAC.
Data Binding Exchange data between ICP DAS Win-GRAF PAC via Ethernet ports (LAN1 and LAN2). The data transmission is event triggered. It is much efficient than polling way. Beside, user can setup the Redundant Binding in two ethernet ports by Software, then if one Ethernet port fail, it can switch to use the other port.
On Line Change For application field that not allowed to stop the Win-GRAF program and wish to run a new program modified a little from the original program.
Modbus RTU I/O When software enables Modbus RTU Master function, the PAC can connect ICP DAS M-7000 and tM series and LC series I/O modules which support Modbus RTU protocol.
Modbus TCP I/O When software enable Modbus TCP Master function, the PAC can connect ICP DAS I-8KE4/8-MTCP, PETL-7000, tPET/tET series I/O modules which support Modbus TCP protocol.
HART Master Support I-87H17W modules in slot 0 to 7 to communicate with other HART devices.
Schedule Control Supports the "Schedule-Control Utility" (free) to implement schedule control. Each PAC can control max. 10 Targets (devices) with different schedule settings in each day / holiday / special day / season / year.
Retain Variables Built-in the fast retain memory that can retain up to 12,000 Win-GRAF variables.
File Access and Data Log The Win-GRAF supports file operation functions to read/write files in the PAC's micro_SD or flash memory to do data log or file access.
eLogger HMI Support to run HMI program (developed by the eLogger) together with the Win-GRAF logic-control program in the same PAC.
Optional I/O List (Go to I-8K, I-87k Selection Guide)
Digital Input (DI) I-8040W, I-8040PW, I-8046W, I-8051W, I-8052W, I-8053W, I-8053PW, I-87040W, I-87040PW, 
I-87046W, I-87051W, I-87052W, I-87053W, I-87053PW, I-87053W-A2, I-87053W-A5, I-87053W-E5
Digital Input/Output (DIO) I-8042W, I-8050W, I-8054W, I-8055W, I-87042W, I-87054W, I-87055W
Digital Output (DO) I-8037W, I-8041W, I-8041AW, I-8056W, I-8057W, I-87037W, I-87041W, I-87057W, I-87057PW
Relay Output I-8060W, I-8063W, I-8064W, I-8068W, I-8069W, I-87061W, I-87061PW, I-87063W, I-87064W,
I-87065W, I-87066W, I-87068W, I-87068W-2A, I-87069W, I-87069PW
AC Input I-8058W, I-87053W-AC1, I-87058W, I-87059W
Analog Input (AI) I-8017DW, I-8017HW, I-8017HCW, I-87017W, I-87017RW, I-87017RCW, I-87017DW, I-87017W-A5, 
I-87017ZW, I-87018W, I-87018RW, I-87018PW, I-87018ZW, I-87019PW, I-87019RW, I-87019ZW
Analog Output (AO) I-8024W, I-87024CW, I-87024UW, I-87024DW, I-87024RW, I-87024W, I-87028CW, I-87028UW,
I-87028VW, I-87028VW-20V
Multifunction (DIO, AIO) I-87026W
Thermister I-87005W
RTD I-87013W, I-87015W, I-87015PW
T/C I-87018W, I-87018RW, I-87018PW, I-87018ZW, I-87019PW, I-87019RW, I-87019ZW
Strain Gauge I-87016W
Counter/Frequency Input I-8084W, I-87082W, I-87084W
Encoder Input I-8093W
PWM Output I-8088W
Communication Module I-8112iW, I-8114W, I-8114iW, I-8142iW, I-8144iW
Temperature & Humidity Input DL-100T485, DL-100T485-W, DL-100T485P, DL-100T485P-W (DCON Protocol)
DL-100TM485, DL-100TM485-W, DL-100TM485P, DL-100TM485P-W (Modbus RTU Protocol)
* Note: COM6 ~ COM37 ports are located in the expansion boards if they are installed in slot 0 ~ 7 of WP-8xx8-CE7.
* WP-8128-CE7 has no COM3 and COM4.
ICP DAS recommends using NS-205/NS-208 or RS-405/408 (Ring Switch) Industrial Ethernet Switches.



Data sheet


Demo files



Odering information

WP-8128-CE7 Win-GRAF based WinPAC-8000-CE7 with 1 I/O Slot
WP-8428-CE7 Win-GRAF based WinPAC-8000-CE7 with 4 I/O Slots
WP-8828-CE7 Win-GRAF based WinPAC-8000-CE7 with 8 I/O Slots


Win-GRAF Development Software
Win-GRAF Workbench Win-GRAF Workbench Software (Large I/O Tags) with one USB Dongle.

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: