Bộ lập trình nhúng IoT Wise ICP DAS WISE-7901

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

WISE-7901 CR User-defined I/O Expansion PoE Module (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ lập trình nhúng IoT Wise ICP DAS WISE-7901

WISE-7901: User-defined I/O Expansion PoE Module

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7901 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7901 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This module WISE-7901 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It supports an I/O expansion bus to implement various I/O functions such as D/I, D/O, A/D, D/A according to the using X-Board.

Features

  • Built-in Web Server for IF-THEN-ELSE rule setting

  • Built-in IF-THEN-ELSE rule enigne for logic operation

  • No more programming. Just click and get done!

  • Support IO, Counter, Timer, Email operations

  • Modbus/TCP Protocol for SCADA Software Seamless Integration

  • IEEE 802.3af-compliant Power over Ethernet (PoE)

  • 10/100 Base-TX Ethernet

  • I/O expansion bus

  • Support DI/DO X-Boards: X107, X109, X110, X111

  • Support Multi-Function X-Boards: X202, X203, X303, X304, X305, X308, X310, X324

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc

Hardware Specifications

Model
WISE-7901
WISE-7901D

CPU Module

CPU

16-bit CPU

SRAM

512 KB

Flash

512 KB

EEPROM

16 KB

NVRAM

31 Bytes

OS

MiniOS7

RTC (Real Time Clock)

RTC Provide seconds, minutes, hours, date of week/month; month and year, valid from 1980 to 2079

64-bit Hardware Serial Number

Yes

Watchdog Timers

Yes (0.8 second)

Communication Ports

Ethernet

RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)

COM 1

No (Unsupported by WISE firmware)

COM 2

No (Unsupported by WISE firmware)

LED Indicators

System LED

Yes

LED Display

-

5-digit 7-segment LED display

Special Indicator

PoE LED

Hardware Expansion

I/O Expansion Bus

Yes

Mechanical

Dimensions (W x H x D)

72 mm x 123 mm x 35 mm

Installation

DIN-Rail or Wall Mounting

Environment

Operating Temperature

-25 ~ +75 °C

Storage Temperature

-40 ~ +80 °C

Ambient Relative Humidity

5 ~ 90% RH, non-condensing

Power

Protection

Power reverse polarity protection

Frame Ground

Yes (for ESD Protection)

Input Range

+12 ~ +48 VDC

Power over Ethernet (PoE)

IEEE 802.3af Class 1

Power Consumption

1.5 W

2.5 W

Software Specifications

 

Functions

Rule Configuration Website

Access Web server on WISE controllers to edit and upload logic rules through web browser.

36 IF-THEN-ELSE Logic Rules

3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions

48 Internal Registers

Hold temporary variables and read/write data via Modbus/TCP address.

12 Timers

Delay / Timing functions.

12 Schedules

Setup prescheduled routine tasks.

12 Emails

Send Email messages to pre-set Email receivers.

12 CGI Commands

Send pre-set CGI commands.

12 Recipes

Set up THEN/ELSE action groups.

8 P2P remote modules

Set up the connection information for the remote WISE modules.

Modbus/TCP Protocol

Real time control and monitoring I/O channels and system status of controllers via SCADA software.

IF Conditions

DI Channel

ON、OFF、ON to OFF、OFF to ON、Change

AI Channel

= 、> 、< 、 ≥ 、 ≤ (value)

Internal Register

DI Counter

= 、> 、< 、 ≥ 、 ≤ (value)、Change

DO Counter

Timer

Timeout、Not Timeout

Schedule

In Range、Out of Range

P2P

DI、AI、DI counter、DO counter、IR

Rule Status

Enable、Disable

THEN / ELSE Actions

DO Channel

ON、OFF、Pulse Output

AO Channel

Change the value

Internal Register

DI Counter

Reset

DO Counter

Timer

Start、Stop

Schedule

Email

Send

CGI Commands

Recipe

Execute

P2P

DO(On/Off)、AO、IR

Rule Status

Enable、Disable

Download

Manual

Software

Data sheet

Certification

Odering information

WISE-7901 CR User-defined I/O Expansion PoE Module (RoHS)

WISE-7901D CR User-defined I/O Expansion PoE Module with LED Display (RoHS)

Accessories

  • GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply

  • MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting

  • NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch (RoHS)

  • NS-205PSE CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: