Bộ lập trình nhúng IoT Wise ICP DAS WISE-7517M-10

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

WISE-7517M-10 CR WISE IoT I/O Module with 10/20 Channels AI and 2-port Ethernet Switch. (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ lập trình nhúng IoT Wise ICP DAS WISE-7517M-10

WISE-7517M-10: WISE I/O Module with 10/20-channels AI and 2-port Ethernet Switch

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.

WISE-7517M-10 is a module with 10-channel differential or 20-channel single-ended analog inputs. It provides programmable input range on all analog channels. Each analog channel has 240 Vrms high overvoltage protection. Each analog input can be programmed to accept voltage or current as input depending upon the position of corresponding jumper. It also has qualification for 4 kV ESD protection as well as 3000 VDC intra-module isolation. WISE-7517M-10 follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7517M-10 also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced.

By integrating with IF-THEN-ELSE rule engine, WISE-7517M-10 provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7517M-10 also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

Features

  • Runs on browsers, no extra software tool is required.

  • No more programming, Web pages provided for control logic editing.

  • IF-THEN-ELSE logic rules execution ability.

  • Built-in I/O (AI: 10/20 Channels)

  • Support I/O Moniitoring/Control, Counter, Timer, Schedule, Email sending and CGI Command sending operations.

  • Modbus TCP Protocol for SCADA System Integration.

  • IEEE 802.3af-compliant Power over Ethernet (PoE).

  • 2-port Ethernet Switch for Daisy-Chain Topology.

  • MQTT Protocol for IT & IoT (Internet of Things) System Integration.

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Hardware Specifications

Analog Input

Channels

10 differential or 20 single-ended (Note1), software selectable

Type

±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V 
±20 mA ,0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)

Resolution

16-bit

Sampling Rate

10 Samples/Second (Total)

Accuracy

±0.1 %

Zero Drift

±20 μV/°C

Span Drift

±25 ppm/°C

Overvoltage Protection

Differential

240 Vrms

Single-ended

150 Vrms

Common Voltage Protection

±200 VDC

Overcurrent Protection

Yes, 50 mA at 110 VDC

Virtual Channel to Channel Isolation

Yes, 400 VDC

Open Wire Detection for 4 ~ 20 mA

Yes

Input Impedance

Voltage

2 MΩ (Differential), 1 MΩ (Single-ended)

Current

125 Ω

Common Mode Rejection

86 dB Min.

Normal Mode Rejection

100 dB

Note1:

 Differential mode can be used for voltage input and current input.

 

 Single-Ended mode can be used for voltage input only.

Communication

Ethernet Port

2 x RJ-45, 10/100 Base-TX, Swtich Ports

PoE

Yes

Protocol

Modbus TCP, MQTT

LED Indicators

for System Running

Yes

for Ethernet Link/Act

Yes

for I/O Channel Status

Yes

for PoE Power

Yes

2-Way Isolation

I/O

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for Each Terminal and 
±8 kV Air for Random Point

EFT (IEC 61000-4-4)

±2 kV for Power Line

Surge (IEC 61000-4-5)

±2 kV for Power Line

Power

Reverse Polarity Protection

Yes

Powered from Terminal Block

12 ~ 48 VDC

Powered from PoE

Yes, IEEE 802.3af, Class1

Consumption

3.7 W (Max.)

Mechanical

Dimensions (L x W x H)

120mm x 97mm x 42mm

Installation

Wall mounting

Environment

Operating Temperature

-25 °C to +75 °C

Storage Temperature

-30 °C to +80 °C

Humidity

10 to 90% RH, non-condensing

Software Specifications

 

Functions

Rule Configuration Website

Access Web server on WISE controllers to edit and upload logic rules through web browser.

72 IF-THEN-ELSE Logic Rules

3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions

48 Internal Registers

Hold temporary variables and read/write data

24 Timers

Delay / Timing functions.

24 Schedules

Setup prescheduled routine tasks.

24 Emails

Send Email messages to pre-set Email receivers.

24 CGI Commands

Send pre-set CGI commands.

24 Recipes

Set up THEN/ELSE action groups.

8 P2P remote modules

Set up the connection information for the remote WISE modules.

Modbus TCP Protocol

Real time control and monitoring I/O channels and system status of controllers via SCADA software.

MQTT Protocol

Real time message publish/subscribe mechanism for I/O channels and system status via IT/IoT software.

IF Conditions

AI Channel

= 、> 、< 、 ≥ 、 ≤ (value)

Internal Register

Timer

Timeout, Not Timeout

Schedule

In Range, Out of Range

P2P

DI, AI, DI counter, DO counter, IR

Rule Status

Enable, Disable

THEN / ELSE Actions

Internal Register

Change the value

Timer

Start, Reset

Schedule

Enable, Disable

Email

Send

MQTT message

CGI Commands

Recipe

Execute

P2P

DO(On/Off), AO, IR

Rule Status

Enable, Disable

Download

Manual

Software

Data sheet

Certification

Odering information

WISE-7517M-10 CR WISE IoT I/O Module with 10/20 Channels AI and 2-port Ethernet Switch. (RoHS)

Accessories

  • GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply

  • MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting

  • NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch (RoHS)

  • NS-205PSE CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: