Bộ lập trình nhúng IoT Wise ICP DAS WISE-7255

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

WISE-7255 CR 8-channel Isolated Source Type Open Collector Output and 8-channel Digital Input PoE Module (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ lập trình nhúng IoT Wise ICP DAS WISE-7255

WISE-7255: 8-channel Isolated Source Type Open Collector Output and 8-channel Digital Input PoE Module

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.

WISE-7255 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7255 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This module WISE-7255 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 8-channel isolated open collector outputs and 8-channel Dry/Wet contact digital inputs. Each output channel supports 650 mA currnet driving 10 ~ 40 VDC.

Features

  • Built-in Web Server for IF-THEN-ELSE rule setting

  • Built-in IF-THEN-ELSE rule enigne for logic operation

  • No more programming. Just click and get done!

  • Support IO, Counter, Timer, Email operations

  • Modbus/TCP Protocol for SCADA Software Seamless Integration

  • IEEE 802.3af-compliant Power over Ethernet (PoE)

  • 10/100 Base-TX Ethernet

  • 2-way Isolation/ESD Protection

  • DO Type: 8 Isolated Open Collectors (Source Type)

  • DI Type: 8 Dry/Wet Contact (Sink/Source)

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Hardware Specifications

Digital Input

Channels

8

Contact

Dry +Wet

Sink/Source (NPN/PNP)

Dry: Source
Wet: Sink/Source

Wet Contact

On Voltage Level

+10 VDC ~ +50 VDC

Off Voltage Level

+4 VDC Max.

Dry Contact

On Voltage Level

Close to GND

Off Voltage Level

Open

Input Impedance

10 kΩ

Counters

Max. Count

65535 (16 bits)

Max. Input Frequency

50 Hz

Min. Pulse Width

10 ms

Overvoltage Protection

+70 VDC

Effective Distance

500 M Max.

Digital Output

Output Channels

8

Output Type

Open Collector (Source)

Max. Load Current

650 mA/channel at 25 °C

Load Voltage

+10 VDC ~ +40 VDC

Overvoltage Protection

47 VDC

Overload Protection

-

Short Circuit Protection

Yes

System

CPU

16-bit CPU

SRAM

512 KB

Flash Memory

512 KB

EEPROM

16 KB

Watchdog

Yes

Communication

Ethernet Port

2 x RJ-45, 10/100 Base-TX, Swtich Ports

2 Way Isolation

I/O

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for Each Terminal and ±8 kV Air for Random Point

EFT (IEC 61000-4-4)

±2 kV for Power Line

Surge (IEC 61000-4-5)

±2 kV for Power Line

LED Indicators

for System Running

Yes

for Ethernet Link/Act

Yes

for DI/DO status

Yes

for PoE Power

Yes

Power Requirements

Reserve Polarity Protection

Yes

Powered from terminal block

Yes, 12 ~ 48 VDC

Powered from PoE

Yes, IEEE 802.3af, Class1

Consumption

4.0 W

Mechanical

Dimensions (L x W x H)

120 mm x 76 mm x 38 mm

Installation

DIN-Rail or Wall mounting

Environment

Operating Temperature

-25 ~ +75 °C

Storage Temperature

-30 ~ +80 °C

Humidity

10 ~ 90% RH, non-condensing

Software Specifications

Functions

Rule Configuration Website

Access Web server on WISE controllers to edit and upload logic rules through web browser.

36 IF-THEN-ELSE Logic Rules

3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions

48 Internal Registers

Hold temporary variables and read/write data via Modbus/TCP address.

12 Timers

Delay / Timing functions.

12 Emails

Send Email messages to pre-set Email receivers.

12 CGI Commands

Send pre-set CGI commands.

12 Recipes

Set up THEN/ELSE action groups.

8 P2P remote modules

Set up the connection information for the remote WISE modules.

Modbus/TCP Protocol

Real time control and monitoring I/O channels and system status of controllers via SCADA software.

IF Conditions

DI Channel

ON, OFF, ON to OFF, OFF to ON, Change

Internal Register

= 、> 、< 、 ≥ 、 ≤ (value)

DI Counter

= 、> 、< 、 ≥ 、 ≤ (value)、Change

DO Counter

Timer

Timeout、Not Timeout

P2P

DI、AI、DI counter、DO counter、IR

Rule Status

Enable、Disable

THEN / ELSE Actions

DO Channel

ON、OFF、Pulse Output

Internal Register

Change the value

DI Counter

Reset

DO Counter

Timer

Start、Reset

Email

Send

CGI Commands

Recipe

Execute

P2P

DO(On/Off)、AO、IR

Rule Status

Enable、Disable

Download

Manual

Software

Data sheet

Certification

Odering information

WISE-7255 CR 8-channel Isolated Source Type Open Collector Output and 8-channel Digital Input PoE Module (RoHS)

Accessories

  • GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply

  • MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting

  • NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch (RoHS)

  • NS-205PSE CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: