Bộ lập trình nhúng IoT Wise ICP DAS WISE-7167

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

WISE-7167 CR 8-Channel Power Relay Output PoE Module (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ lập trình nhúng IoT Wise ICP DAS WISE-7167

WISE-7167: 8-Channel Power Relay Output PoE Module

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7167 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7167 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This module WISE-7167 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 8-channel power relay outputs. Each power relay supports contact rating as 5 A @ 250 VAC or 5 A @ 30 VDC.

Features

  • Built-in Web Server for IF-THEN-ELSE rule setting

  • Built-in IF-THEN-ELSE rule enigne for logic operation

  • No more programming. Just click and get done!

  • Support IO, Counter, Timer, Email operations

  • Modbus/TCP Protocol for SCADA Software Seamless Integration

  • IEEE 802.3af-compliant Power over Ethernet (PoE)

  • 10/100 Base-TX Ethernet

  • 2-way Isolation/ESD Protection

  • DO Type: 8 Power Relay (Form A)

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Hardware Specifications

Power Relay

Output Channels

8

Output Type

Power Relay, Form A (SPST N.O.)

Operating Voltage Range

250 VAC/30 VDC

Max. Load Current

5.0A/channel at 25 °C

Operate Time

6 ms (Typical)

Release Time

3 ms (Typical)

Electrical Life
(Resistive Load)

VDE

5A 250 VAC 30,000 ops (10 ops/minute) at 75 °C

5A 30 VDC 70,000 ops (10 ops/minute) at 75 °C

UL

5A 250 VAC/30 VDC 6,000 ops.

3A 250 VAC/30 VDC 100,000 ops.

Mechanical Life

20,000,000 ops. at no load (300 ops./minute)

System

CPU

16-bit CPU

SRAM

512 KB

Flash Memory

512 KB

EEPROM

16 KB

Watchdog

Yes

Communication

PoE Ethernet Port

10 / 100 Base-TX and automatic MDI/MDI-X

2 Way Isolation

I/O

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for Each Terminal and ±8 kV Air for Random Point

EFT (IEC 61000-4-4)

±2 kV for Power Line

LED Indicators

PoE

PoE On

L1

System Running

L2

Ethernet Link/Act

L3

Ethernet 10/100M Speed

Power Requirements

Reserve Polarity Protection

Yes

Powered from terminal block

Yes, 12 ~ 48 VDC

Powered from PoE

Yes, IEEE 802.3af, Class1

Consumption

5.3 W

Mechanical

Dimensions (W x H x D)

72 mm x 123 mm x 35 mm

Installation

DIN-Rail or Wall mounting

Environment

Operating Temperature

-25 ~ +75 °C

Storage Temperature

-30 ~ +80 °C

Humidity

10 ~ 90% RH, non-condensing

Software Specifications

Functions

Rule Configuration Website

Access Web server on WISE controllers to edit and upload logic rules through web browser.

36 IF-THEN-ELSE Logic Rules

3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions

48 Internal Registers

Hold temporary variables and read/write data via Modbus/TCP address.

12 Timers

Delay / Timing functions.

12 Emails

Send Email messages to pre-set Email receivers.

12 CGI Commands

Send pre-set CGI commands.

12 Recipes

Set up THEN/ELSE action groups.

8 P2P remote modules

Set up the connection information for the remote WISE modules.

Modbus/TCP Protocol

Real time control and monitoring I/O channels and system status of controllers via SCADA software.

IF Conditions

Internal Register

= 、> 、< 、 ≥ 、 ≤ (value)

DO Counter

= 、> 、< 、 ≥ 、 ≤ (value)、Change

Timer

Timeout、Not Timeout

P2P

DI、AI、DI counter、DO counter、IR

Rule Status

Enable、Disable

THEN / ELSE Actions

DO Channel

ON、OFF、Pulse Output

Internal Register

Change the value

DO Counter

Reset

Timer

Start、Stop

Email

Send

CGI Commands

Recipe

Execute

P2P

DO(On/Off)、AO、IR

Rule Status

Enable、Disable

Download

Manual

Software

Data sheet

Certification

Odering information

WISE-7167 CR 8-Channel Power Relay Output PoE Module (RoHS)

Accessories

  • GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply

  • MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting

  • NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch (RoHS)

  • NS-205PSE CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: