Bộ lập trình nhúng IoT Wise ICP DAS WISE-7126

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

WISE-7126 CR 6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs and 2-channel Digital Outputs PoE Module (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ lập trình nhúng IoT Wise ICP DAS WISE-7126

WISE-7126: 6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs and 2-channel Digital Outputs PoE Module

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7126 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7126 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7126 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. Each analog input channel provides 240 Vrms high over voltage protection.

Features

  • Built-in Web Server for IF-THEN-ELSE rule setting

  • Built-in IF-THEN-ELSE rule enigne for logic operation

  • No more programming. Just click and get done!

  • Support IO, Counter, Timer, Email operations

  • Modbus/TCP Protocol for SCADA Software Seamless Integration

  • IEEE 802.3af-compliant Power over Ethernet (PoE)

  • 10/100 Base-TX Ethernet

  • AI: 6 (mV, V, mA)

  • AO: 2 (V, mA)

  • DO: 2 (Open Collector Output)

  • DI: 2 (Dry+Wet)

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Hardware Specifications

Analog Input

Input Channels

6 (Differential)

Input Type
(Jumper Selectable)

±500 mV, ±1V, ±5 V, ±10 V

+0 mA ~ +20 mA, ±20 mA, 4 ~ 20 mA

Resolution

16-bit

Sampling Rate

10 Samples/Sec.

Accuracy

±0.1%

Zero Drift

±20 uV/°C

Span Drift

±25 ppm/°C

Overvoltage Protection

240 Vrms

Input Impedance

2M Ω

Common Mode Rejection

86 dB Min.

Normal Mode Rejection

100 dB

Individual Channel Configuration

Yes

Analog Output

Output Channels

2

Output Type
(jumper selectable)

+0 V~ +5 V, ±5 V, +0 V~ +10 V,±10 V

+0 mA ~ +20 mA, +4 mA ~ +20 mA

Individual Channel Configuration

Yes

Resolution

12-bit

Accuracy

±0.1% of FSR

Voltage Output Capability

10 V@20 mA

Current Load Resistance

500 Ω

Open Wire Detection

Yes, for 4 ~ 20mA only

Digital Input

Input Channels

2

Dry Contact
(Source)

On Voltage Level

Close to GND

Off Voltage Level

Open

Effective Distance for Dry Contact

500M Max.

Wet contact

On Voltage Level

+1 VDC Max.

Off Voltage Level

+3.5 VDC ~ +30 VDC

Counters

Channels

2

Max. Counts

16-bit (65535)

Max. Input Frequency

50 Hz

Min. Pulse Width

10 ms

Overvoltage Protection

30 VDC

Digital Output

Output Channels

2

Output Type

Isolated Open Collector (Sink)

Max Load Current

700 mA/Channel

Load Voltage

+5 VDC ~ +50 VDC

Overvoltage Protection

60 VDC

Overload Protection

1.4 A

Short-circuit Protection

Yes

System

CPU

16-bit CPU

SRAM

512 KB

Flash Memory

512 KB

EEPROM

16 KB

Watchdog

Yes

Communication

PoE Ethernet Port

10 / 100 Base-TX and automatic MDI/MDI-X

2 Way Isolation

I/O

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for each terminal and ±8 kV Air for random point

EFT (IEC 61000-4-4)

±4 kV for Power Line

LED Display

PoE

PoE On

L1

System Running

L2

Ethernet Link/Act

L3

Ethernet 10/100M Speed

Power Requirements

Reserve Polarity Protection

Yes

Powered from terminal block

Yes, 12 ~ 48 VDC

Powered from PoE

Yes, IEEE 802.3af, Class1

Consumption

4.2 W

Mechanical

Dimensions (W x H x D)

72 mm x 123 mm x 35 mm

Installation

DIN-Rail or Wall mounting

Environment

Operating Temperature

-25 ~ +75 °C

Storage Temperature

-30 ~ +80 °C

Relative Humidity

10 ~ 90% RH, non-condensing

Software Specifications

Functions

Rule Configuration Website

Access Web server on WISE controllers to edit and upload logic rules through web browser.

36 IF-THEN-ELSE Logic Rules

3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions

48 Internal Registers

Hold temporary variables and read/write data via Modbus/TCP address.

12 Timers

Delay / Timing functions.

12 Emails

Send Email messages to pre-set Email receivers.

12 CGI Commands

Send pre-set CGI commands.

12 Recipes

Set up THEN/ELSE action groups.

8 P2P remote modules

Set up the connection information for the remote WISE modules.

Modbus/TCP Protocol

Real time control and monitoring I/O channels and system status of controllers via SCADA software.

IF Conditions

DI Channel

ON、OFF、ON to OFF、OFF to ON、Change

AI Channel

= 、> 、< 、 ≥ 、 ≤ (value)

Internal Register

DI Counter

= 、> 、< 、 ≥ 、 ≤ (value)、Change

DO Counter

Timer

Timeout、Not Timeout

P2P

DI、AI、DI counter、DO counter、IR

Rule Status

Enable、Disable

THEN / ELSE Actions

DO Channel

ON、OFF、Pulse Output

AO Channel

Change the value

Internal Register

DI Counter

Reset

DO Counter

Timer

Start、Stop

Email

Send

CGI Commands

Recipe

Execute

P2P

DO(On/Off)、AO、IR

Rule Status

Enable、Disable

Download

Manual

Software

Data sheet

Certification

Jumpers Setting

Odering information

WISE-7126 CR 6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs and 2-channel Digital Outputs PoE Module (RoHS)

Accessories

  • GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply

  • MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting

  • NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch

  • NS-205PSE CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: