Bộ lập trình nhúng IoT Wise ICP DAS WISE-7118Z

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

WISE-7118Z/S CR 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module (RoHS) Include WISE-7118Z Module and DB-1820 Daughter Board WISE-7118Z/S2 CR 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module (RoHS) Include WISE-7118Z Module, DN-1822 Daughter Board and 1.8 m Cable

Gọi 0904251826 để được trợ giúp

Bộ lập trình nhúng IoT Wise ICP DAS WISE-7118Z

WISE-7118Z: 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7118Z follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7118Z will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This module WISE-7160 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 6 power relay outputs and 6 isolated wet contact digital inputs. Each power relay supports contact rating as 5 A @ 250 VAC or 5 A @ 30 VDC and each digital input channel supports counter input.

Features

  • Built-in Web Server for IF-THEN-ELSE rule setting

  • Built-in IF-THEN-ELSE rule enigne for logic operation

  • No more programming. Just click and get done!

  • Support IO, Counter, Timer, Email operations

  • Modbus/TCP Protocol for SCADA Software Seamless Integration

  • IEEE 802.3af-compliant Power over Ethernet (PoE)

  • 10/100 Base-TX Ethernet

  • Support Current Input, Voltage Input and Thermocouple Input

  • Over Voltage Protection is up to 240 Vrms

  • 6-channel Digital Outputs

  • 2-way Isolation/ESD Protection

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc

Hardware Specifications

Analog Input

Input Channels

10 (Differential)

Input Type

±15 mV, ±50 mV, ±100 mV, ±500 mV,±1 V, ±2.5 V

±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Requires Optional External 125 Ω Resistor)

Thermocouple (J, K, T, E, R, S, B, N,C, L, M, LDIN43710)

Resolution

16-bit

Sampling Rate

10 Samples/Sec. (Total)

Accuracy

±0.1% or better

Zero Drift

±0.5 uV/°C

Span Drift

±25 ppm/°C

Overvoltage Protection

240 Vrms

Input Impedance

>300 kΩ

Common Mode Rejection

150 dB Min.

Normal Mode Rejection

100 dB

Individual Channel Configuration

Yes

Temperature outputs consistency

Yes

Stable temperature output in the field

Yes

Open Wire Detection

Yes

Digital Output

Output Channels

6

Output Type

Isolated Open Collector (Sink)

Max. Load Current

700 mA/Channel

Load Voltage

5 VDC ~ 50 VDC

Overvoltage Protection

60 VDC

Overload Protection

1.4 A

Short-circuit Protection

Yes

System

CPU

16-bit CPU

SRAM

512 KB

Flash Memory

512 KB

EEPROM

16 KB

Watchdog

Yes

Communication

PoE Ethernet Port

10/100 Base-TX and automatic MDI/MDI-X

2 Way Isolation

I/O

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for each terminal and ±8 kV Air for random point

EFT (IEC 61000-4-4)

±4 kV for Power Line

LED Indicators

PoE

PoE On

L1

System Running

L2

Ethernet Link/Act

L3

Ethernet 10/100M Speed

Power Requirements

Reserve Polarity Protection

Yes

Powered from terminal block

Yes, 12 ~ 48 VDC

Powered from PoE

Yes, IEEE 802.3af, Class1

Consumption

3.0 W

Mechanical

Dimensions (W x H x D)

72 mm x 123 mm x 35 mm

Installation

DIN-Rail or Wall mounting

Environment

Operating Temperature

-25 °C ~ +75 °C

Storage Temperature

-30 °C ~ +80 °C

Humidity

10 ~ 90% RH, non-condensing

Software Specifications

Functions

Rule Configuration Website

Access Web server on WISE controllers to edit and upload logic rules through web browser.

36 IF-THEN-ELSE Logic Rules

3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions

48 Internal Registers

Hold temporary variables and read/write data via Modbus/TCP address.

12 Timers

Delay / Timing functions.

12 Emails

Send Email messages to pre-set Email receivers.

12 CGI Commands

Send pre-set CGI commands.

12 Recipes

Set up THEN/ELSE action groups.

8 P2P remote modules

Set up the connection information for the remote WISE modules.

Modbus/TCP Protocol

Real time control and monitoring I/O channels and system status of controllers via SCADA software.

IF Conditions

AI Channel

= 、> 、< 、 ≥ 、 ≤ (value)

Internal Register

DO Counter

= 、> 、< 、 ≥ 、 ≤ (value)、Change

Timer

Timeout、Not Timeout

P2P

DI、AI、DI counter、DO counter、IR

Rule Status

Enable、Disable

THEN / ELSE Actions

DO Channel

ON、OFF、Pulse Output

Internal Register

Change the value

DO Counter

Reset

Timer

Start、Stop

Email

Send

CGI Commands

Recipe

Execute

P2P

DO(On/Off)、AO、IR

Rule Status

Enable、Disable

Download

Manual

Software

Data sheet

Certification

Odering information

WISE-7118Z/S CR 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module (RoHS)
Include WISE-7118Z Module and DB-1820 Daughter Board

WISE-7118Z/S2 CR 10-channel Thermocouple Input with High Voltage Protection and 6-channel Isolated Output PoE Module (RoHS)
Include WISE-7118Z Module, DN-1822 Daughter Board and 1.8 m Cable

Accessories

  • GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply

  • MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting

  • NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch

  • NS-205PSE CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)

  • CD-2518D : 25F-25M 1.8 m Cable with DIN-Rail Mount of DB-1820

  • CD-25015 : 25F-25M 15 cm Cable with DIN-Rail Mount of DB-1820

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: