Switch công nghiệp quản lý EN50155 16 cổng PoE Ethernet + 2 cổng Gigabit Ethernet Oring TPS-3162GT-M12-BP1

Thương hiệu: Oring | Tình trạng: Còn hàng
Liên hệ

TPS-3162GT-M12-BP1 EN50155 18-port managed PoE Ethernet switch with 16x10/100Base-T(X) P.S.E. and 2x10/100/1000Base-T(X), M12 connector and 1xbypass included

Gọi 0904251826 để được trợ giúp

Switch công nghiệp quản lý EN50155 16 cổng PoE Ethernet + 2 cổng Gigabit Ethernet Oring TPS-3162GT-M12-BP1

Introduction

Overview

ORing’s TransporterTM series managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.  The TPS-3162GT-M12-BP1 is a managed PoE Redundant Ring Ethernet switch with 16x10/100Base-T(X) P.S.E. and 2x10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement.  With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.  Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. And O-Chain technology is supported which can applied for multiple redundant Ethernet rings.  TPS-3162GT-M12-BP1 also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.  Each TPS-3162GT-M12-BP1 switch has 16X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup.

Features

  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • 16 ports P.S.E. fully compliant with IEEE802.3af standard, provide up to 15.4 Watts per port
  • World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain support applications with multiple redundant rings topology
  • *note Support standard IEC 62439 MRP (Media Redundancy Protocol) function
  • STP/RSTP:2004/MSTP supported
  • Support PTP Client (Precision Time Protocol) clock synchronization
  • Support Modbus TCP protocol
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • SNMP v1/v2c/v3 support for secured network management
  • RMON for traffic monitoring
  • Support VLAN and LLDP protocol
  • DHCP assign each Equipment IP by each Port
  • Provided Relay bypass function with two gigabit ports
  • Event notification through Syslog, Email, SNMP trap, and Relay Output
  • Windows utility (Open-Vision) support centralized management and configurable by Web-based ,Telnet, and Console (CLI)
  • Support IPV6 new internet protocol version
  • Provided HTTPS/SSH protocol to enhance network security
  • Support TACACS+ and 802.1x User Authentication for security

*NOTE: This function is available by request only

Specification

ORing Switch Model TPS-3162GT-M12-BP1 TPS-3162GT-M12-BP1-24V
Physical Ports  

10/100Base-T(X) Ports in M12 Auto MDI/MDIX with P.S.E.

16 x M12 connector (4-pin D-coding)
10/100/1000Base-T(X) ports in M12 2 x M12 connector (8-pin A-coding)
RS-232 Serial Console Port RS-232 in M12 connector (A-coding). Baud rate setting: 9600bps, 8, N, 1
Technology  
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1D-2004 for RSTP:2004 (Rapid Spanning Tree Protocol 2004)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.)

MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 7.2Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 1024
Port rate limiting: User Define

Security Featues

Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP v1/v2c/v3 encrypted authentication and access security
Https / SSH enhance network security

Software Features

STP/RSTP:2004/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP

Network Redundancy

O-Ring
Open-Ring
O-Chain
*note MRP
STP
RSTP:2004
MSTP

Warning / Monitoring System

Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support

LED Indicators  
Power Indicator Green : Power LED x 2
R.M. Indicator Green : Indicate system operated in O-Ring Master mode
O-Ring Indicator Green : Indicate system operated in O-Ring mode
Fault Indicator Amber : Indicate unexpected event occurred
10/100Base-T(X) M12 PoE Port Indicator

Top Green for port Link/Act.
Middle Green for PoE indicator.
Bottom Amber for Collision/Duplex indicator.

10/100/1000Base-T(X) M12 Port Indicator Green for Link/Act. Amber for 100Mbps indicator
Fault Contact  
Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
Power  
Redundant Input Power Dual DC inputs. 48VDC on 5-pin M23 connector Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector
Power Consumption (Typ.) 8.88 Watts (power consumption of P.S.E. is not included) 14.88 Watts
PoE Output Power 240 watts 120 Watts (12~24VDC) / 240 Watts (24~57VDC)
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics  
Enclosure IP-40
Dimensions (W x D x H) 260 (W) x 91.3 (D) x216 (H) mm
Weight (g) 2104 g 2220 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

 *NOTE: This function is available by request only

Order information

Model Name Description
TPS-3162GT-M12-BP1 EN50155 18-port managed PoE Ethernet switch with 16x10/100Base-T(X) P.S.E. and 2x10/100/1000Base-T(X), M12 connector and 1xbypass included
TPS-3162GT-M12-BP1-24V EN50155 18-port managed PoE Ethernet switch with 16x10/100Base-T(X) P.S.E. and 2x10/100/1000Base-T(X), M12 connector and 1xbypass included

Download

Datasheet Preview Version Release date Size  
Datasheet_TPS-3162GT-M12-BP1 Series.pdf No v2.0a Apr 20, 2017 3.69MB

 

Manual Preview Version Release date Size  
User Manual_TPS-3162GT-M12-BP1 Series.pdf No V1.0 Apr 20, 2016 3.67MB

 

QIG Preview Version Release date Size  
QIG_TPS-3162GT-M12-BP1.pdf No V1.0 Apr 20, 2016 672.25KB

 

Firmware Preview Version Release date Size  
FW_TPS-3162,.zip See detail K3.12 Dec 07, 2016 733.55KB

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: