PoE Injector công nghiệp 1 cổng Ethernet 30W Oring TINJ-101-M12

Thương hiệu: Oring | Tình trạng: Còn hàng
Liên hệ

TINJ-101-M12 EN50155 Industrial 1-port FET PoE Injector with 30W output, M12 connector

Gọi 0904251826 để được trợ giúp

PoE Injector công nghiệp 1 cổng Ethernet 30W Oring TINJ-101-M12

Introduction

Overview

ORing's TransporterTM series PoE Injectors are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TINJ-101-M12 PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection that provided 1-port 10/100 Base-T(X) PoE output which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TINJ-101-M12 EN50155 PoE Injector use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the TINJ-101-M12 PoE Injector. Typically in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The TINJ-101-M12 PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

Features

  • PoE+Injector for 1x10/100 Base-T(X)
  • Fully compliant with IEEE802.3at/802.3af standard
  • Auto protection for Over Voltage Power Input and over current output
  • Supports Power Output up to 30Watts
  • Supports Power wide Input range from 12Vdc to 57 Vdc
  • Ultra-rugged enclosure M12 connector for toughest industrial usages
  • Wall mounting enabled

Specification

ORing Injector Model TINJ-101-M12 TINJ-101-M12-24V
Physical Ports  
10/100 Base-T(X) with P.S.E.
Ports in M12 Auto MDI/MDIX
1 x M12 connector (4-pin M12 D-coding)
10/100 Base-T(X) Port in M12
Auto MDI/MDIX
1 x M12 connector (4-pin M12 D-coding)
Operating Voltage  
Input Voltage 50 ~ 57 VDC on 4-pin M12 A-coding 12 ~ 57 VDC on 4-pin M12 A-coding
Output Power 50V / 600mA, 30 Watts max. 12V / 2500mA, 30 Watts max.
LED Indicator  
Power Indicator PWR / Ready: 1 x LED 
Green On: Power is on and functioning Normally.
PoE Indicators 1 x LED
Blue On: PoE Device Link
Blue Blinking: Detecting PoE Device
Blue Off : None PoE Device Detected
Protection  
Short Circuit Protection Present
Over Load Protection Present
Physical Characteristics  
Enclosure IP-40
Dimensions (W x D x H) 88.9 (W) x 40 (D) x 178.2 (H)mm (3.5 x 1.57 x 7.0 inch)
Weight (g) 385 g 446 g
Environmental  
Storage Temperature -40 to 80°C (-40 to 176°F)
Operating Temperature -25 to 70°C (-13 to 158°F)
Operating Humidity 5% to 90% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Order information

Model Name Description
TINJ-101-M12 EN50155 Industrial 1-port FET PoE Injector with 30W output, M12 connector
TINJ-101-M12-24V EN50155 Industrial 1-port FET PoE Injector with 30W output, M12 connector

Download

Datasheet Preview Version Release date Size  
Datasheet_TINJ-101-M12 Series.pdf No v1.0 Apr 20, 2017 1.12MB

 

QIG Preview Version Release date Size  
QIG_TINJ-101-M12(-24V) Series.pdf No V1.0 May 11, 2016 243.63KB

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: