Bộ chuyển đổi 3 cổng RS-485 sang PoE Ethernet ICP DAS tDS-735

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

tDS-735 CR Tiny Device Server with PoE and 3 RS-485 Ports (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ chuyển đổi 3 cổng RS-485 sang PoE Ethernet ICP DAS tDS-735

Features

  • Incorporates any RS-232/422/485 serial device in Ethernet
  • Data transmission via Virtual COM or raw TCP connection
  • VxComm Driver for 32-bit and 64-bit Windows XP/2003/2008/Vista/7/8/10
  • Max. connections : 1 socket per serial port is suggested
  • Supports pair-connection (serial-bridge, serial-tunnel) applications
  • Supports TCP client-mode and TCP server-mode operations
  • Supports UDP responder for device discovery (UDP Search)
  • Static IP or DHCP network configuration
  • Easy firmware update via the Ethernet (BOOTP, TFTP)
  • Tiny Web server for configuration (HTTP)
  • Contains a 32-bit MCU that efficiently handles network traffic
  • 10/100 Base-TX Ethernet, RJ-45 x 1 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
  • Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
  • Allows automatic RS-485 direction control
  • 2500 VDC Isolation and +/-4 kV ESD protection for i versions
  • Male DB-9 or terminal block connector for easy wiring
  • Tiny form-factor and low power consumption
  • RoHS compliant & no Halogen
  • Cost-effective device servers

Introductions

The tDS-700 is a series of Serial-to-Ethernet device servers that are designed to add Ethernet and Internet connectivity to any RS-232 and RS-422/485 device, and to eliminate the cable length limitation of legacy serial communication. By using the VxComm Driver/Utility, the built-in COM port of the tDS-700 series can be virtualized to a standard PC COM port in Windows. Therefore, users can transparently access or monitor serial devices over the Internet/Ethernet without software modification.

The tDS-700 device servers can be used to create a pair-connection application (as well as serial-bridge or serial-tunnel), and can then route data over TCP/IP between two serial devices, which is useful when connecting mainframe computers, servers or other serial devices that do not themselves have Ethernet capability. By virtue of its protocol independence and flexibility, the tDS-700 meets the demands of virtually any network-enabled application.

DHCP minimizes configuration errors caused by manual IP address configuration, such as address conflicts caused by the assignment of an IP address to more than one computer or device at the same time. The tDS-700 supports the DHCP client function, which allows the tDS-700 to easily obtain the necessary TCP/IP configuration information from a DHCP server. The tDS-700 also contains a UDP responder that transmits its IP address information in response to a UDP search from the VxComm Utility, making local management more efficient.

The tDS-700 features a powerful 32-bit MCU to enable efficient handling of network traffic. It also has a built-in web server that provides an intuitive web management interface to allow users to modify the settings of the module, including DHCP/Static IP, gateway/mask and serial ports.

Based on an amazing tiny form-factor, the tDS-700 achieves the maximum space savings that allows it to be easily installed anywhere, even directly attached to a serial device or embedded into a machine.

The tDS-700 series also contains a built-in CPU watchdog, which automatically resets the CPU if the built-in firmware is operating abnormally, or if there is no communication between the tDS-700 and the host for a predefined period of time (system timeout). This is an important feature that ensures the tDS-700 operates continuously, even in harsh environments. In addition, the tDS-700 series (for i version) also adds 2500 VDC isolation and +/-4 kV ESD protection component that diverts the potentially damaging charge away from sensitive circuit to protects the module and equipment from the sudden and momentary electric current.

The tDS-700 offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) functionality using a standard category 5 Ethernet cable to receive power from a PoE switch such as the NS-205PSE. If there is no PoE switch on site, the tDS-700 will also accept power input from a DC adapter. The tDS-700 is designed for ultra-low power consumption, reducing hidden costs from increasing fuel and electricity prices, especially when you have a huge amount of device servers installed. Reducing the amount of electricity consumed by choosing energy-efficient equipment can have a positive impact on maintaining a green environment.

The tDS-712 is equipped with a male DB-9 connector, while other models are equipped with a removable terminal block connector to allow easy wiring, and also supports automatic RS-485 direction control when sending and receiving data.

Applications

  • Factory, Building and Home Automation
  • Remote Diagnosis and Management

System Specification

Models tDS-712
tDS-712i
tDSM-712 tDS-722
tDS-722i
tDS-732
tDS-732i
tDS-715
tDS-715i
tDS-725
tDS-725i
tDS-735
tDS-735i
tDS-718
tDS-718i
tDS-724
tDS-724i
tDS-734
tDS-734i
System
CPU 32-bit ARM
Communication Interface
Ethernet 10/100 Base-TX, 8-pin RJ-45 x 1 (Auto-negotiating, Auto-MDI/MDIX, LED indicator)
PoE (IEEE 802.3af, Class 1)
COM1 5-wire RS-232 5-wire RS-232 3-wire RS-232 2-wire RS-485
4-wire RS-422
2-wire RS-485 2-wire RS-485 3-wire RS-232 2-wire RS-485 2-wire RS-485
2-wire RS-485
4-wire RS-422
COM2 5-wire RS-232 3-wire RS-232 2-wire RS-485 2-wire RS-485 5-wire RS-232 3-wire RS-232
COM3 3-wire RS-232 2-wire RS-485 3-wire RS-232
Self-Tuner Yes, automatic RS-485 direction control
RS-485 Bias Resistor Yes, 1 KΩ
Node 254 (max.)
UART 16c550 or compatible
Isolation 2500 VDC for only tDS-712i / 722i / 732i / 715i / 725i / 735i / 718i / 724i / 734i
ESD Protection +/-4 kV for only tDS-712i / 722i / 732i / 715i / 725i / 735i / 718i / 724i / 734i
COM Port Format
Baud Rate 115200 bps Max.
Data Bit 5, 6, 7, 8
Parity None, Odd, Even, Mark, Space
Stop Bit 1, 2
Power
Power Input PoE: IEEE 802.3af, Class 1
DC jack: +12 ~ 48 VDC
Power Consumption 0.07 A @ 24 VDC
Mechanism
Connector Male DB-9 x1 10-Pin Removable Terminal Block x 1
Mounting DIN-Rail
Case Plastic Metal Plastic
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing

Selection Guide

tDS-700 Series (Tiny Device Server with PoE and DC jack) : Includes one CA-002 cable.
Model (Non-Isolated) Model (Isolated) Case RS-232 RS-422/485 RS-485 COM1 COM2 COM3
tDS-712 CR tDS-712i CR Plastic 1 - - 5-wire RS-232 - -
tDSM-712 CR   Metal    
tDS-722 CR tDS-722i CR Plastic 2 - - 5-wire RS-232 5-wire RS-232 -
tDS-732 CR tDS-732i CR Plastic 3 - - 3-wire RS-232 3-wire RS-232 3-wire RS-232
tDS-715 CR tDS-715i CR Plastic - 1 - 2-wire RS-485
4-wire RS-422
- -
tDS-725 CR tDS-725i CR Plastic - - 2 2-wire RS-485 2-wire RS-485 -
tDS-735 CR tDS-735i CR Plastic - - 3 2-wire RS-485 2-wire RS-485 2-wire RS-485
tDS-718 tDS-718i CR Plastic 1 - 3-wire RS-232 - -
2-wire RS-485
4-wire RS-422
tDS-724 CR tDS-724i CR Plastic 1 - 1 2-wire RS-485 5-wire RS-232 -
tDS-734 CR tDS-734i CR Plastic 2 - 1 2-wire RS-485 3-wire RS-232 3-wire RS-232

Download

Manual

Software

Data Sheet

FAQ

Certification

Odering Information

Model (Non-Isolated)
tDS-712 CR Tiny Device Server with PoE and 1 RS-232 Port (RoHS)
tDSM-712 CR ~ NEW ~ Tiny Device Server with PoE and 1 RS-232 Port (Metal case, RoHS)
tDS-722 CR Tiny Device Server with PoE and 2 RS-232 Ports (RoHS)
tDS-732 CR Tiny Device Server with PoE and 3 RS-232 Ports (RoHS)
tDS-715 CR Tiny Device Server with PoE and 1 RS-422/485 Port (RoHS)
tDS-725 CR Tiny Device Server with PoE and 2 RS-485 Ports (RoHS)
tDS-735 CR Tiny Device Server with PoE and 3 RS-485 Ports (RoHS)
tDS-718 CR Tiny Device Server with PoE and 1 RS-232/422/485 Port (RoHS)
tDS-724 CR Tiny Device Server with PoE and 1 RS-232 and 1 RS-485 Ports (RoHS)
tDS-734 CR Tiny Device Server with PoE and 2 RS-232 and 1 RS-485 Ports (RoHS)
Includes one CA-002 cable.
Model (Non-Isolated)
tDS-712i CR ~ Available soon ~ Tiny Device Server with PoE and 1 Isolated RS-232 Port (RoHS)
tDS-722i CR ~ Available soon ~ Tiny Device Server with PoE and 2 Isolated RS-232 Ports (RoHS)
tDS-732i CR ~ Available soon ~ Tiny Device Server with PoE and 3 Isolated RS-232 Ports (RoHS)
tDS-715i CR Tiny Device Server with PoE and 1 Isolated RS-422/485 Port (RoHS)
tDS-725i CR ~ NEW ~ Tiny Device Server with PoE and 2 Isolated RS-485 Ports (RoHS)
tDS-735i CR ~ NEW ~ Tiny Device Server with PoE and 3 Isolated RS-485 Ports (RoHS)
tDS-718i CR ~ Available soon ~ Tiny Device Server with PoE and 1 Isolated RS-232/422/485 Port (RoHS)
tDS-724i CR ~ Available soon ~ Tiny Device Server with PoE and 1 Isolated RS-232 and 1 Isolated RS-485 Ports (RoHS)
tDS-734i CR ~ Available soon ~ Tiny Device Server with PoE and 2 Isolated RS-232 and 1 Isolated RS-485 Ports (RoHS)
Includes one CA-002 cable.

Note: Coating version supports -40 ~ +75 °C operating temperature, call for more information.

Accessories

CA-002 DC connector to 2-wire power cable, 0.3 M
CA-PC09F DB-9 Female connector with plastic cover
CA-0910N DB-9 Female-Female 3-wire Null Modem Cable, 1 M
CA-0915 Male DB-9 to Female DB-9 Cable, 1.5 m
CA-0910F Female DB-9 to Female DB-9 Cable, 1.0 m
CA-0909 Female DB-9 to Female DB-9 connector for tDS-712/tGW-712.
NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +12 VDC ~ +56 VDC (RoHS)
NS-205PSE CR Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
FRA05-S12-SU 12 V/0.58 A (max) Power Supply.

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: