Bộ chuyển đổi EN50155 4 cổng RS-422/485 cách ly sang Ethernet M12 Oring TDS-5041-I-M12

Thương hiệu: Oring | Tình trạng: Còn hàng
Liên hệ

EN50155 Industrial 4-port secure serial to Ethernet device server with 4xRS-422/485(2KV isolation) and 1x10/100Base-T(X), M12 connector

Gọi 0904251826 để được trợ giúp

Bộ chuyển đổi EN50155 4 cổng RS-422/485 cách ly sang Ethernet M12 Oring TDS-5041-I-M12

Introduction

Overview

TDS-5041-I-M12 is an innovative secure 4-port RS-422/485 to 1 port LAN secure device server, with TCP/IP and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com easily. The features of NAT Router Pass Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, TDS-5041-I-M12 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, TDS-5041-I-M12 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
TDS-5041-I-M12 supports 4xRS-422/485 interfaces on 5-pin M12 A-coding connectors and provides one wide range power input, 12~48 VDC, on a 5-pin M12 connector. With wide operating temperature, -40~70°C, TDS-5041-I-M12 could operate in the harsh industrial environment. Therefore, TDS-5041-I-M12 is the best solution to the high demand of secure serial to Ethernet critical data communication for rolling stock application.

Features

  • Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP

  • Redundant multiple host devices:

  • host devices: Virtual COM, TCP Server, TCP Client mode; 4 IP ranges: UDP

  • NAT-pass through: user can manage TDS-5041-I-M12 through NAT router

  • Security: SSL data encryption; secured management by HTTPS and SSH: IP Access: IP White List

  • Internet Communication: PPPoE

  • Update DNS Hostname: DDNS

  • Event Warning by Syslog, Email, SNMP trap, Relay and Beeper

  • Configurable by Web-based and Windows utility (DS-Tool)

  • Various Windows O.S. supported:

           Windows NT / 2000 / XP / 2003 / VISTA(32/64bit) / Windows 7(32/64bit) / Windows 8(32/64bit)

Specification

Specifications

ORing Device Server Model

TDS-5041-I-M12

Physical Ports

 

10/100 Base-T(X) Ports in M12 Auto MDI/MDIX

1 (4-pin D-Coding in female connector)

Serial Ports

 

Connector

M12 x 4 (5-pin A-coding in male connector)

Operation Mode

RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool

Serial Baud Rate

110 bps to 460.8 Kbps

Data Bits

5, 6, 7, 8

Parity

odd, even, none, mark, space

Stop Bits

1, 1.5, 2

RS-232

TxD, RxD, GND

RS-485 (2-wire)

Data+, Data-,GND

Flow Control

XON/XOFF

Isolation

2KVDC

Network Features

 

Protocol

ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, DDNS, PPPoE

LED Indicators

 

Power Indicator

PWR 1(2)(PoE)/ Ready :
Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On: Power is on and functioning Normally.
Green Blinking: Located by Administrator.

10/100Base-T(X) RJ45 Port Indicator

Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.

Serial TX / RX LEDs

Red: Serial port is receiving data Green: Serial port is transmitting data

Fault Contact

 

Relay

Relay output to carry capacity of 1A at 24VDC

Power

 

Input Power

Power Inputs. 12-48VDC x 1(5-pin M12 female in A-coding)

Power Consumption (Typ.)

5.5 watts

Overload Current Protection

Present

Physical Characteristics

 

Enclosure

IP-40

Dimensions (W x D x H)

170(W) x 65 (D) x 195(H) mm (6.69 x2.55x7.7.67 inch.)

Weight (g)

950 g

Environmental

 

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 70°C (-40 to 158°F)

Operating Humidity

5% to 95% Non-condensing

Regulatory Approvals

 

EMI

FCC Part 15, CISPR (EN55022) class A

EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock

IEC60068-2-27, EN61373

Free Fall

IEC60068-2-32

Vibration

IEC60068-2-6, EN61373

Warranty

5 years

Order information

Model Name

Description

TDS-5041-I-M12

EN50155 Industrial 4-port secure serial to Ethernet device server with 4xRS-422/485(2KV isolation) and 1x10/100Base-T(X), M12 connector

Download

Datasheet

Preview

Version

Release date

Size

 

Datasheet_TDS-5041-I-M12.pdf

No

V1.0

Apr 29, 2016

1.71MB

 

Manual

Preview

Version

Release date

Size

 

User Manual _TDS-5041-I-M12.pdf

No

V1.0

Apr 29, 2016

2.36MB

 

QIG

Preview

Version

Release date

Size

 

QIG_TDS-5041-I-M12.pdf

No

V1.0

Apr 29, 2016

295.03KB

 

Firmware

Preview

Version

Release date

Size

 

FW_TDS-5041-I-M12.zip

No

V2.1

Apr 29, 2016

4.26MB

 

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: