Cáp giao diện CS I/O sang RS-232 Campbell Scientific SC929

Thương hiệu: Campbell Scientific | Tình trạng: Còn hàng
Liên hệ

SC929 Interface Cable, CS I/O to RS-232

Gọi 0904251826 để được trợ giúp

Cáp giao diện CS I/O sang RS-232 Campbell Scientific SC929

Overview

The SC929 is a cable interface between a datalogger and a computer. One end of the cable connects to the datalogger's CS I/O port. The other end connects directly to the 9-pin serial port of a computer.  The SC929 does not provide optical isolation, so it should only be used with laptop computers running from internal batteries (not connected to ac power).

Detailed Description

The SC929 cable connects the datalogger's CS I/O port directly to the 9-pin serial port of a battery-operated laptop. It converts the CMOS logic levels of the datalogger to the RS-232 logic levels of the laptop. The SC929 does not provide electrical isolation, so it should only be used with laptop computers running from internal batteries (not connected to ac power).

Communications with a datalogger over CS I/O utilize Modem Enable mode (ComME). It does not provide Synchronous Device Communication (SDC).

Specifications

Typical Current Consumption

Draws 8 mA from the datalogger

Maximum Baud Rate

57600

Operating Temperature Range

-25° to +50°C

Connections

  • 9-pin male connector attaches to datalogger's CS I/O port.

  • 9-pin female connector configured as DCE; attaches to AT-type portable PC.

  • RS-232 to CS I/O Modem Enable (ComME)

Cable Length

198.1 cm (78.0 in.)

Weight

181 g (6 oz)

Download

Manuals

SC929 9-Pin-to-9-Pin RS-232 Cable

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: