Module giao diện Datalogger CPI Campbell Scientific SC-CPI

Thương hiệu: Campbell Scientific | Tình trạng: Còn hàng
Liên hệ

SC-CPI Datalogger-to-CPI Interface

Gọi 0904251826 để được trợ giúp

Module giao diện Datalogger CPI Campbell Scientific SC-CPI

Overview

The SC-CPI is an interface between the serial port of later-model Campbell Scientific dataloggers (CR800/850, CR1000, and CR3000) and our new Campbell distributed modules (CDMs). The CDMs use the new CAN peripheral interface (CPI), and the SC-CPI allows the dataloggers listed above to connect to the CDM's CPI port. 

An SC-CPI is required to connect Campbell Distributed Modules (CDMs), such as the CDM-A116, to a CR800, CR850, CR1000, or CR3000 datalogger. The SC-CPI is not required for, or supported by, dataloggers with a native CPI interface. Campbell Scientific strongly recommends that CDMs be connected to dataloggers with a native CPI interface, such as the CR6.

Specifications

Temperature Range

  • -25° to +50°C (standard)

  • -55° to +85°C (extended)

Dimensions

15.94 x 7.49 x 3.18 cm (6.28 x 2.95 x 1.25 in.) including ground lug

Weight

0.188 kg (0.415 lb)

Connectors

CPI

RJ45

Serial Connect to Datalogger

Screw terminal

Computer Configuration via Device Configuration Utility

USB

Download

Brochures

SC-CPI Datalogger Serial to CPI Interface

Manuals

CDM-VW300 Series Dynamic Vibrating-Wire Analyzer System

Technical Papers

Designing Physical Network Layouts for the CPI Bus

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: