Card PCI 1 cổng CANopen Master ICP DAS PISO-CPM100U-D

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PISO-CPM100U-D 1 Port Intelligent CANopen Master Universal PCI Board with D-Sub 9-pin male connector

Gọi 0904251826 để được trợ giúp

Card PCI 1 cổng CANopen Master ICP DAS PISO-CPM100U-D

The PISO-CPM100 gives a very powerful and economic solution of an active CANopen master device with one CAN channel. It uses the NXP SJA1000T and 82C250 to be the CAN controller and transceiver, which provide bus arbitration, error detection with auto correction and re-transmission function. The 16-bit on-board microcontroller with real-time O.S., MiniOS7, allows many features, such as real-time message transmission and reception, filtering, preprocessing, and storage of CAN messages. Under the effect of the powerful microcontroller, this card can be made for one CAN controller manager without losing data, even in systems with a high PCI bus load. Therefore, the CANopen critical process can be implemented directly by CANopen firmware in the PISO-CPM100. In addition, users can develop their CANopen application by using the CANopen library on the host computer. When the PISO-CPM100 is active, the data exchange between users’ application and CANopen firmware is performed via the memory mapping method of the PISO-CPM100.

Features

  • One CANopen master communication port

  • Standard CANopen specification CiA 301 v4.02

  • Support node id 1 ~ 127

  • Programmable bauds:10 K, 20 K, 50 K, 125 K, 250 K, 500 K, 800 K, and 1M bps

  • Scan function for scanning all nodes on the same CANopen network

  • Provide master listen mode for monitoring without bothering the CANopen network

  • Support both Node Guarding Protocol and Heartbeat Consumer Protocol

  • Provide event trigger function for EMCY event, Node Guarding event and Heartbeat event

  • Provide Event-triggered, remote-requested, cyclic and acyclic SYNC of PDO mode

  • The PDO communication supports single byte output so that users can just modify the value of one byte without changing the others

  • Allow dynamic PDO mapping

  • Allow to get several PDO data simultaneously

  • The SDO communication supports segment protocol

  • Programmable master node ID for the CANopen slave function

  • Support EDS file

  • Allow the automatic adding the node while it boots up

  • Support multi-master architecture

  • CPMUtility utility tool for testing users' CANopen network

  • Provide VC++,VB.Net, and C# (2005) demos and function libraries

Driver Support

  • Development Toolkit for Windows NT4.0

  • Development Toolkit for Windows 98/ME

  • Development Toolkit for Windows 2000/XP

Software

Software Utility

The software utility can easily to access the I/O data of all the slave devices. The users can monitor the input data of the specific slave device and change the output data to the remote slave device with this utility

  • Auto-scan all the CANopen master devices that the CPMUtility has supported

  • Auto-scan all the CANopen slave devices on the CANopen network

  • Support EDS file

  • Dynamic PDO object setting easily

  • Guarding Event and Heartbeat Event detection

  • EMCY message receiving

  • Maximum 5 SYNC message producers per CANopen master

  • Support PISO-CPM100(U), I-8123W, I-7565-CPM for version 2.00 later

  • Support OS: WinCE5.0, and Win2K/XP/Vista/7 with 32-bit system

Motion Control Library

The PISO-CPM100U provides the motion control library now. This library follows the CANopen standard CiA 402. It is available on the Windows 2000/XP/Vista or Win 7(32-bit version) operation system. The CiA 402 is one kind of the standard CANopen application profiles, and specially designed for motion control systems. In addition to making the management of the CANopen motors easy, this communication protocol can reduce the wire connection between the controller and motors, and provide rapid troubleshooting functions. With the PISO-CPM100U and CANopen Motion Library, you can do various motion control functions, such as position control, velocity control, toque control, and synchronous action without having the background knowledge of the complex and abstruse CANopen protocol. The CANopen Motion Library is able to link many CANopen motors so that the multi-axis motion control by one host becomes reachable. While controlling motors, you can also use the APIs of the PISO-CPM100U library to access CANopen remote I/O modules which follows the CiA 401 at the same time. Therefore, building a motion control application becomes more easy and convenient.

Feature:

  • Compliant with CiA 402 v1.1

  • Reduce 50% wires connection cost

  • Physical layer with fault tolerance and anti-noise

  • Support max. 127 motors in one network

  • Absolute and relative position control

  • Velocity control

  • Torque control

  • JOG control

  • Support max. 127 motors synchronous action

  • Various Homing control

  • Support torque limitation with CANopen command

  • Support Win 2000/XP/Vista or Win 7(32-bit version)

Hardware Specification

 

Model Name

PISO-CPM100-D

PISO-CPM100-T

PISO-CPM100U-D

PISO-CPM100U-T

Hardware

CPU

80186, 80 MHz or compatible

SRAM/Flash/EEPROM

512 KB / 512 KB / 2 KB

Bus Interface

Type

PCI bus, 5 V, 33 MHz, 32-bit, plug and play.

Universal PCI supports both 5 V and 3.3 V PCI bus

Board No.

By DIP switch

CAN Interface

Controller

NXP SJA1000T with 16 MHz clock

NXP SJA1000T with 16 MHz clock
Microprocessor inside with 80186 80 MHz

Transceiver

NXP 82C250

Channel number

1

Connector

9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others)

5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)

9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others)

5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)

Baud Rate (bps)

10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M

Transmission Distance (m)

Depend on baud rate (for example, max. 1000 m at 50 kbps )

Isolation

1000 VDC for DC-to-DC, 2500 Vrms for photo-couple

3000 VDC for DC-to-DC, 2500 Vrms for photo-couple

Terminator Resistor

Jumper for 120 Ω terminator resistor

Specification

ISO-11898-2, CAN 2.0A and CAN 2.0B

Protocol

CANopen CiA 301 v4.02

LED

Round LED

Green LED, Red LED

Software

Driver

Windows 98/ME/NT/2K/XP

Windows 2K/XP

Library

VB 6.0, VC++ 6.0, BCB 6.0

Power

Power supply

Unregulated +10 ~ +30 VDC

-

Power Consumption

300 mA @ 5 V

Mechanism

Dimensions

127mm x 22mm x 121mm (W x L x H)

138 mm x 22mm x 127 mm (W x L x H)

Environment

Operating Temp.

0 ~ 60 ℃

Storage Temp.

-20 ~ 80 ℃

Humidity

0 ~ 95% RH, non-condensing

Download

Pin

Driver

Firmware

Software

Manual

Demo files

Datasheet

Datasheet

Certification

FAQ

Odering information

PISO-CPM100-D

CANopen firmware built-in and one standalone intelligence CAN communication port with D-sub 9-pin connector

PISO-CPM100-T

CANopen firmware built-in and One standalone intelligence CAN communication port with 5-pin screw terminal connector

PISO-CPM100U-D

1 Port Intelligent CANopen Master Universal PCI Board with D-Sub 9-pin male connector

PISO-CPM100U-T

1 Port Intelligent CANopen Master Universal PCI Board with 5-pin screw terminal connector

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: