Card PCI 2 cổng CAN cách ly ICP DAS PISO-CAN200U-T

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PISO-CAN200U-T CR 2-Port Isolated Protection Universal PCI CAN Communication Board with 5-pin Screw Terminal Connector (RoHS)

Gọi 0904251826 để được trợ giúp

Card PCI 2 cổng CAN cách ly ICP DAS PISO-CAN200U-T

The CAN (Controller Area Network) is a serial communication protocol, and efficiently supports distributed real-time control with a very high level of security. It is an especially suit for networking "intelligent" devices as well as sensors and actuators within a system or sub-system. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted. As standalone CAN controller, PISO-CAN400/CAN200 can represents an economic solution of an active CAN board. It has two or four independent CAN bus communication ports with 5-pin screw terminal connector or 9-pin D-sub connector, and has the ability to cover a wide range of CAN applications. Besides, PISO-CAN400/CAN200 uses the new CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and re-transmission function. It can be installed in a 5V PCI slot and supported truly “Plug & play”.

Features

  • Two independent CAN bus 2.0A/2.0B communication ports

  • Compatible with CAN specification 2.0 parts A and B

  • On-board optical isolation protection

  • Programmable transfer rate up to 1 Mbps

  • 2500 Vrms photo couple isolation on the CAN bus

  • Jumper select 120Ω terminator resistor for each port

  • Direct memory mapping to the CAN controllers

  • 33MHz 32bit 5V PCI bus (V2.1) plug and play

[PISO-CAN200-D/T only]

  • PCI card, supports 5V PCI bus

[PISO-CAN200U-D/T only]

  • Universal PCI card, supports both 5V and 3.3V PCI bus

Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of PISO-CAN200.

Hardware Architecture

Software Architecture

RTX Driver

In order to satisfy the users to apply the RTX system, ICPDAS provides the RTX driver for PISO-CAN series CAN card. If users want to combine the CAN communication interface in their time-critical system, the RTX driver of the PISO-CAN series CAN cards can help them to do this easily and quickly. Furthermore, the name and parameters of the APIs in the RTX driver are the same as in the Windows driver. Users don’t need to pay more efforts to study how to use the APIs of the RTX driver if they have used the Windows driver before. The RTX driver increases the additional worth of the PISO-CAN series CAN cards, and satisfies the users to get the highly real-time system. By owing to the feature of high price performance and highly real-time, PISO-CAN series CAN cards will be applied in more wide and more variant CAN applications.

Features

  1. The name and parameters of the APIs in RTX driver are the same as them in the Windows driver. Users don’t need to learn the new usage if they have used the PISO-CAN series CAN card before

  2. If the PISO-CAN series CAN card can get the independent IRQ, it supports interrupt function

  3. Direct I/O control and highly real-time feature

  4. Support Windows2000 SP4, and Windows XP SP2 OS

  5. Support RTX version 8.1 and 2011

SocketCAN Driver

The SocketCAN is based on the Linux operating system, and it contains the implementation interface of the network stack and the hardware driver. The hardware manufacturers program the hardware driver for the SocketCAN, and the network stack provides the standard BSD Socket APIs for users. Therefore, from the users’ point of view, they can easily and quickly program their applications without being familiar with the various APIs of the different hardware interface through the SocketCAN network stack.

We have provided the SocketCAN drivers for several kinds of CAN interface cards. Users can implement their SocketCAN-based application on the Linux platform by using these cards. Besides, we also support static library of CANopen/DeviceNet master on x86 hardware platform. It can help users communicate with CANopen/DeviceNet slaves more easily.

Hardware Specifications

Model Name

PISO-CAN200U-D

PISO-CAN200U-T

Bus Interface

Type

Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, plug and play

CAN Interface

Controller

NXP SJA1000T with 16 MHz clock

Transceiver

NXP 82C250

Channel number

2

Connector

9-pin male D-Sub

5-pin screwed terminal block

Baud Rate (bps)

10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)

Isolation

3000 VDC for DC-to-DC, 2500 Vrms for photo-couple

Terminator Resistor

Jumper for 120 Ω terminator resistor

Power

Power Consumption

250 mA @ 5 V

Software

Driver

Windows 2K/XP/7/8 (32-bit/64-bit OS), Linux 2.6.x ~ 3.2.20, LabView, DASYLab, InduSoft

Library

VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net

Mechanism

Dimensions

126mm x 22mm x 85mm (W x L x H)

Environment

Operating Temp.

-20 ~ +60℃

Storage Temp.

-40 ~ +70℃

Humidity

5 ~ 85% RH, non-condensing

Download

Pin

Manual

Demo files

Driver

Software

Application

Data sheet

Certification

FAQ

Odering information

PISO-CAN200U-D CR

2-Port Isolated Protection Universal PCI CAN Communication Board with 9-pin D-sub connector (RoHS)

PISO-CAN200U-T CR

2-Port Isolated Protection Universal PCI CAN Communication Board with 5-pin Screw Terminal Connector (RoHS)

Optional Accessories

CNT-CAN CAN bus Connector
CA-0910-C 9-pin Female D-sub & 3-wire CAN bus cable (1M)
SG-770 7/14 channel Surge Protector
4PCD-002 EMI Ferrite Split/Snap-On Core
M12A-5P-IP68 Field-Installation A-coded 5-pin Female

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: