Card PCI 8 kênh đầu ra tương tự 14-bit ICP DAS PIO-DA8U/S

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PIO-DA8U/S PIO-DA8U with DN-37 (RoHS) Includes one CA-3710 D-Sub cable.

Gọi 0904251826 để được trợ giúp

Card PCI 8 kênh đầu ra tương tự 14-bit ICP DAS PIO-DA8U/S

Features

  • Supports +5 V PCI bus for PIO-DA4/DA8/DA16

  • 16/8/4 channels, 14-bit analog output

  • Voltage output range: ±10 V

  • Current output range: 0 ~ 20 mA (sink)

  • Two pacer timer interrupt source

  • Double-buffered D/A latch

  • Software calibration

  • 16-channel DI, 16-channel DO

  • One D-Sub connector, two 20-pin flat cable connectors

  • Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR

    [PISO-DA16U/DA8U/DA4U only]

  • Built-in DC/DC converter with 3000 VDC isolation

  • Supports both +5 V and +3.3 V PCI bus

  • 2500 VDC bus-type and power isolation protection

  • Digital input port can be set to pull-high or pull-low

  • Card ID function

  • [PIO-DA16U/DA8U/DA4U, PEX-DA16/DA8/DA4 only]

  • Supports both +5 V and +3.3 V PCI bus for PIO-DA16U/DA8U/DA4U

  • Supports PCI Express x 1 for PEX-DA16/DA8/DA4

  • Digital input port can be set to pull-high or pull-low

  • Card ID function

Introduction

The PEX-DA, PISO-DAxU and PIO-DAxU series cards (PCI Express/Universal PCI versions) are compatible with the PIO-DAx cards (PCI versions) and most users can replace the PIO-DAx by PEX-DA, PISO-DAxU or PIO-DAxU directly without software/driver modification. Please refer to user manual (ch 1.1) for the compatibility information.

The PISO-DA series adds high-voltage isolation design that offers a durable ability to keep users' computers safe from unexpected surge. It is the built-in high-quality isolation components that make PISO-DA series featuring 2500 VDC bus-typed isolation! For the PEX-DA, PIO-DA and the PISO-DA series, their voltage output range is from -10 V to +10 V, and their current output range is from 0 to 20 mA. In addition, These cards also feature the following advantages by ICP DAS's innovation:

  1. Accurate and easy-to-use calibration.
    ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore. The calibration information can be saved in EEPROM for long-term use.

  2. Individual channel configuration.
    In other words, every channel can be individually configured as voltage output or current output!

  3. Card ID.
    ICP DAS provides the card ID function for PEX-DA, PISO-DAxU and PIO-DAxU (version 1.1 or above) series. Users can set card ID for each card and then recognize them one by one when more than two boards are used in a computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 8/7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

Application

  • High speed data acquisition system.

  • Process monitor and control.

  • Vibration analysis.

  • Digital pattern generator from digital I/O port.

Software

  • DOS Lib and TC/BC/MSC sample program (with source codes)

  • DLL and OCX SDK for Windows 95/98/NT/2K.

  • DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.

  • VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.

  • LabVIEW toolkit for Windows.

  • Driver for Linux and DasyLab.

Specification

Model Name

PEX-DA4/DA8/DA16

PIO-DA4U/DA8U/DA16U

PISO-DA4U/DA8U/DA16U

Analog Outputs

Isolation Voltage

N/A

2500 V (Bus Type)

Compatibility

4/8/16 independent

Resolution

14-bit

Accuracy

0.04% of FSR ± 2 LSB @ 25 °C, ± 10 V

Output Range

Voltage: +/- 10 V
Current: 0 ~ 20 mA

Output Driving

+/- 5 mA

Slew Rate

0.71 V/μs

Output Impedance

0.1 Ω max.

Operating Mode

Software

Digital Inputs

Channels

16

Compatibility

5 V/TTL

Input Voltage

Logic 0: 0.8 V max.
Logic 1: 2.0 V min.

Response Speed

200 kHz

1.0 MHz (Typical)

Digital Outputs

Channels

16

Compatibility

5 V/CMOS

5 V/TTL

Output Voltage

Logic 0: 0.1 V max.
Logic 1: 4.4 V min.

Logic 0: 0.4 V max.
Logic 1: 2.4 V min.

Output Capability

Sink: 6 mA @ 0.33 V
Source: 6 mA @ 4.77 V

Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V

Response Speed

200 kHz

1.0 MHz (Typical)

Timer/Counter

Channels

3

Resolution

16-bit

Compatibility

5 V/TTL

Reference Clock

Internal: 4 MHz

General

Bus Type

PCI Express x 1

3.3 V/5 V Universal PCI, 32-bit, 33 MHz

Data Bus

8-bit

Card ID

Yes(4-bit)

Yes(4-bit) for Version 1.1 or above

Yes(4-bit)

I/O Connector

Female DB37 x 1
20-pin Box header x 2

Dimensions (L x W)

188 mm x 97 mm

188 mm x 97 mm (Version 1.1 or above)

180 mm x 97 mm

Power Consumption

600 mA@ +5 V (PEX-DA4)
800 mA@ +5 V (PEX-DA8)
1400 mA @ +5 V (PEX-DA16)

600 mA@ +5 V (PIO-DA4U)
800 mA@ +5 V (PIO-DA8U)
1400 mA @ +5 V (PIO-DA16U)

2200 mA @ +5 V (PISO-DA4U)
2400 mA @ +5 V (PISO-DA8U)
3000 mA @ +5 V (PISO-DA16U)

Operating Temperature

0 ~ 60 °C

Storage Temperature

-20 ~ 70 °C

Humidity

5 ~ 85% RH, non-condensing

Download

Manual

Pin

Data sheet

FAQ

Certification

Odering information

PCI Express Version

PEX-DA4 CR

PCI Express, 4-channel D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

PEX-DA8 CR

PCI Express, 8-channel D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

PEX-DA16 CR

PCI Express, 16-channel D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

Universal PCI Version

PIO-DA4U CR

Universal PCI 4-channel D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

PIO-DA8U CR

Universal PCI 8-channel D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

PIO-DA16U CR

Universal PCI 16-channel D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

PISO-DA4U CR

Universal PCI 4-channel isolated D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

PISO-DA8U CR

Universal PCI 8-channel isolated D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

PISO-DA16U CR

Universal PCI 16-channel isolated D/A board (RoHS)
Includes one CA-4002 D-Sub connector.

OEM Version

PIO-DA4U/S

PIO-DA4U with DN-37 (RoHS)
Includes one CA-3710 D-Sub cable.

PIO-DA8U/S

PIO-DA8U with DN-37 (RoHS)
Includes one CA-3710 D-Sub cable.

PIO-DA16U/S

PIO-DA16U with DN-37 (RoHS)
Includes one CA-3710 D-Sub cable.

PISO-DA4U/S

PISO-DA4U with DN-37 (RoHS)
Includes one CA-3710 D-Sub cable.

PISO-DA8U/S

PISO-DA8U with DN-37 (RoHS)
Includes one CA-3710 D-Sub cable.

PISO-DA16U/S

PISO-DA16U with DN-37 (RoHS)
Includes one CA-3710 D-Sub cable.

Accessories

ADP-20/PCI

Extender, Extended dual 20-pin flat-cable connector to PC slot window

CA-3710

DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))

CA-3710D

DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))

CA-3715DM-H

DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)

CA-3730DM-H

DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)

CA-3750DM

DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)

CA-3750DM-H

DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)

CA-4002

37-pin Male D-sub connector with plastic cover.

DB-16P

16-channel Isolated Digital Input Daughter Board

DB-16R

16-channel Relay Output Daughter Board

DB-24PR

24-channel power relay board

DB-24POR

24-channel Photo Mos relay output board

DB-24C

24-channel open-collector output board

DN-37

DIN Rail Mounting 37-pin Connector

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: