PEX-CAN200i-D CR: Card PCI Express 2 cổng CAN

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PEX-CAN200i-D CR 2-port Isolated Protection CAN PCI Express Card with 9-pin D-sub connector (RoHS)

Gọi +84 904251826 để được trợ giúp

PEX-CAN200i-D CR: Card PCI Express 2 cổng CAN

Features

• PCI Express Interface
• Compatible with CAN 2.0 parts A and B
• Fully compatible with ISO 11898-2 standard
• Support CAN bard from 10K to 1M bps
• 2500 Vrms photo couple isolation on the CAN bus
• 33 MHz, 32 bit, X1 PCI Express bus (It can be plugged into the PCI-Express x1, x4, x8, or x16 slot)
• Build-in jumper to select 120 ohm terminal resister
• 3KV galvanic isolation
• 2 independent CAN channels
• Direct memory mapping to the CAN controller
• Provide VB, VC++, Delphi, BC++ demos

Introduction

PEX-CAN200i can represents an economic solution of an active CAN board with express PCI bus. It has 2 independent CAN bus communication ports with 5-pin screw terminal connector or 9-pin D-sub connector, and has the ability to cover a wide range of CAN applications. Besides, PEX-CAN200i uses the new CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function.

Application

• CAN bus communication application
• DeviceNet, CANopen, CAN J1939, SDS(System Wide Network) protocol application
• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition

Specifications

Software
Driver Windows XP/7/8/10 (32-bit/64-bit OS), Linux 2.6.x ~ 4.8.0, LabView, DASYLab, InduSoft
Library VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net

 

PC Bus
Type 33 MHz, 32 bit, X1 PCI Express bus

 

CAN
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250
Ports 2
Baud Rate 10 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor

 

Power
Consumption 100 mA @ 12 V, 100 mA @ 3.3 V

 

Mechanical
Dimensions (mm) 120 x 85 x 22 (W x L x D)

 

Environmental
Operating Temperature 0 ~ +60 °C
Storage Temperature -20 ~ +70 °C
Humidity 5 ~ 85% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

PEX-CAN200i-D     CR  2-port Isolated Protection CAN PCI Express Card with 9-pin D-sub connector (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: