Card PCI Express 32 kênh I/O Digital cách ly + 32 kênh I/O Digital TTL ICP DAS PEX-730

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PEX-730 CR PCI Express, 32-channel isolated digital I/O (Input Logic High: 9~24 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS) Includes one CA-4002 D-Sub connector

Gọi 0904251826 để được trợ giúp

Card PCI Express 32 kênh I/O Digital cách ly + 32 kênh I/O Digital TTL ICP DAS PEX-730

Features

  • Support the +3.3 V/+ 5 V PCI bus for PISO-730U/730U-5V

  • Support PCI Express x1 for PEX-730

  • 16-channel Optically-isolated Digital Input

  • 16-channel Optically-isolated Digital Output (Sink, NPN)

  • 16-channel 5 V/TTL Digital Output

  • 16-channel 5 V/TTL Digital Input

  • 3750 Vrms photo-isolation protection

  • Built-in DC/DC converter with 3000 VDC isolated

  • Two interrupt sources

  • Output status readback function

  • Card ID function

  • SMD, short card, power saving

  • Supports Plug & Play to obtain I/O resources

  • No more manually setting of I/O address and IRQ

Introduction

The PEX-730 and PISO-730U/730U-5V card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The PISO-730U card is designed as a drop-in replacement for the PISO-730, while the PEX-730 card is designed as easy replacement for the PISO-730. Users can replace the PISO-730 by the PEX-730 and PISO-730U directly without software/driver modification.

PEX-730 and PISO-730U/730U-5V cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a Darlington (NPN) transistor and integrated suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PEX-730 and PISO-730U/730U-5V cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 8/7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

Application

  • Factory automation

  • Product test

  • Laboratory automation

Software

  • DOS Lib and TC/BC/MSC sample program (with source codes).

  • DLL and OCX SDK for Windows 95/98/NT/2K.

  • DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.

  • VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.

  • LabVIEW toolkit for Windows.

  • Driver for Linux.

Specification

Model Name

PEX-730

PISO-730U

PISO-730U-5V

Isolated Digital Input

Isolation Voltage

3750 Vrms

Channels

16

Compatibility

Optical

Input Voltage

Logic 0: 0 ~ 1 V
Logic 1: 9 ~ 24 V
(Logic 1: Min. 7 V; Max. 30 V)

Logic 0: 0 ~ 1 V
Logic 1: 5 ~ 12 V
(Logic 1: Min. 3.5 V; Max. 16 V)

Input Impedance

1.2 KΩ, 1 W

Response Speed

4 kHz (Typical)

Isolated Digital Output

Isolation Voltage

3750 Vrms

Channels

16

Compatibility

Sink (NPN), Open Collector

Output Capability

100 mA/+30 V for each channel @ 100% duty

Response Speed

4 kHz (Typical)

Non-isolated Digital Input

Channels

16

Compatibility

5V/TTL

Input Voltage

Logic 0: 0.8 V max.
Logic 1: 2.0 V min.

Response Speed

500 kHz

1.2 MHz (Typical)

Non-isolated Digital Output

Channels

16

Compatibility

5V/TTL

Output Voltage

Logic 0: 0.4 V max.
Logic 1: 2.4 V min.

Output Capability

Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V

Response Speed

500 kHz

1.2 MHz (Typical)

General

Bus Type

PCI Express x 1

3.3 V/5 V Universal PCI, 32-bit, 33 MHz

Data Bus

8-bit

Card ID

Yes(4-bit)

I/O Connector

Female DB37 x 1
20-pin box header x 2

Dimensions (L x W x D)

163 mm x 116 mm x 22 mm

180 mm x 105 mm x 22 mm

Power Consumption

600 mA @ +5 V

Operating Temperature

0 ~ 60 °C

Storage Temperature

-20 ~ 70 °C

Humidity

5 ~ 85% RH, non-condensing

Download

Manual

Pin

Data sheet

Software

FAQ

Certification

Odering information

PEX-730 CR

PCI Express, 32-channel isolated digital I/O (Input Logic High: 9~24 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)
Includes one CA-4002 D-Sub connector.

PISO-730U CR

Universal PCI Bus, 32-channel isolated digital I/O (Input Logic High: 9~24 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)
Includes one CA-4002 D-Sub connector.

PISO-730U-5V CR

Universal PCI Bus, 32-channel isolated digital I/O (Input Logic High: 5~12 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)
Includes one CA-4002 D-Sub connector.

Accessories

CA-2002

20-pin flat cable,20 cm x 2

CA-2010

20-pin flat cable,1 M

CA-2020

20-pin flat cable 2 M

CA-3710

DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))

CA-3710D

DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))

CA-3715DM-H

DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)

CA-3730DM-H

DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)

CA-3750DM

DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)

CA-3750DM-H

DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)

CA-4002

37-pin Male D-sub connector with plastic cover.

DB-37

Directly connect signal to D-sub 37-pin connector

DN-37

DIN Rail Mounting 37-pin Connector

DN-20

Two 20-pin header DIN-rail terminal board

DB-16P

16-channel isolated D/I board

DB-16R

16-channel relay board

ADP-20/PCI

20-pin extender

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: