Module 8 kênh đầu vào số + 8 kênh đầu ra số kết nối 2 cổng PoE Ethernet Modbus TCP/IP ICP DAS PET-7252

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

PET-7252 CR PoE Ethernet I/O Module with 2-port Ethernet Switch, with 8-ch DI, 8-ch DO (RoHS)

THÔNG TIN SẢN PHẨM

Features

Built-in Web Server
Web HMI
Support for both Modbus TCP and Modbus UDP Protocols
Communication Security
2-port Ethernet Switch for Daisy-Chain Topology
Dual Watchdog
Wide Operating Temperature Range: -25 ~ +75°C
I/O Pair Connection
Built-in I/O
- DI/Counter: 8 Channels
- DO: 8 Channels

Introduction

The ET-7052/PET-7052/ET-7252/PET-7252 provides 8 wet contact digital input channels and 8 source-type digital output channels. It features optical isolation for 2500 VDC of transient overvoltage protection but doesn’t provide channel-to-channel isolation. Each input channel can be used as a 32-bit counter and each output channel can drive 650 mA load. The power-on value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present.

System Specification

Models	ET-7052	PET-7052	ET-7252	PET-7252
Software
Built-In Web Server	Yes
Web HMI	Yes
I/O Pair Connection	Yes
Communication
Ethernet Port	1 x RJ-45, 10/100 Base-TX		2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE	-	Yes	-	Yes
Protocol	Modbus/TCP, Modbus/UDP
Security	ID, Password and IP Filter
Dual Watchdog	Yes, Module (0.8 second), Communication (Programmable)
LED Indicators
for System Running	Yes
for Ethernet Link/Act	Yes
for DI/DO status	-		Yes
for PoE Power	-	Yes	-	Yes
2-Way Isolation
Ethernet	1500 VDC	-	1500 VDC	-
I/O	2500 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
EFT (IEC 61000-4-4)	±4 kV for Power Line Line		±2 kV for Power Line
Surge (IEC 61000-4-5)	±0.5 kV for Power Line		±2 kV for Power Line
Power Requirements
Reverse Polarity Protection	Yes
Powered from Terminal Block	10 ~ 30 VDC	12 ~ 48 VDC	12 ~ 48 VDC	12 ~ 48 VDC
Powered from PoE	-	Yes, IEEE 802.3af, Class1	-	Yes, IEEE 802.3af, Class1
Consumption	2.5 W (Max.)	2.5 W (Max.)	3.4 W (Max.)	3.5 W (Max.)
Mechanical
Dimensions (W x L x H)	72 mm x 123 mm x 35 mm		76 mm x 120 mm x 38 mm
Installation	DIN-Rail or Wall mounting
Environmental
Operating Temperature	-25 ~ +75°C
Storage Temperature	-30 ~ +80°C
Humidity	10 ~ 90% RH, Non-condensing

I/O Specificaiton

Models		ET-7052	PET-7052	ET-7252	PET-7252
Digital Input/Counter
Channels		8
Contact		Wet Contact
Sink/Source (NPN/PNP)		Sink/Source
On Voltage Level		+10 VDC ~ +50 VDC
Off Voltage Level		+4 VDC Max.
Input Impedance		10 kΩ
Counters	Max. Count	4,294,967,295 (32 bits)
	Max. Input Frequency	500 Hz		100 Hz
	Min. Pulse Width	1 ms		5 ms
Overvoltage Protection		+70 VDC
Digital Output
Channels		8
Type		Isolated Open Collector
Sink/Source (NPN/PNP)		Source
Max. Load Current		650 mA/channel at 25°C
Load Voltage		+10 VDC ~ +40 VDC
Overvoltage Protection		47 VDC
Overload Protection		-
Short-circuit Protection		Yes
Power-on Value		Yes, Programmable
Safe Value		Yes, Programmable

Download

Download Center

Data sheet

Certification

Odering information

ET-7052 CR	Ethernet I/O Module with 8-ch DI, 8-ch DO (RoHS)
PET-7052 CR	PoE Ethernet I/O Module with 8-ch DI, 8-ch DO (RoHS)
ET-7252 CR	Ethernet I/O Module with 2-port Ethernet Switch, with 8-ch DI, 8-ch DO (RoHS)
PET-7252 CR	PoE Ethernet I/O Module with 2-port Ethernet Switch, with 8-ch DI, 8-ch DO (RoHS)

Module 8 kênh đầu vào số + 8 kênh đầu ra số kết nối 2 cổng PoE Ethernet Modbus TCP/IP ICP DAS PET-7252

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng