Module 3 kênh đầu vào bộ đếm tốc độ cao kết nối PoE Ethernet Modbus TCP/IP ICP DAS PET-7083

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PET-7083 CR PoE Ethernet I/O Module with 3-ch Encoder/Counter Inputs (RoHS)

Gọi 0904251826 để được trợ giúp

Module 3 kênh đầu vào bộ đếm tốc độ cao kết nối PoE Ethernet Modbus TCP/IP ICP DAS PET-7083

Features

  • Built-in Web Server

  • Web HMI

  • Support for both Modbus TCP and Modbus UDP Protocols

  • Communication Security

  • 2-port Ethernet Switch for Daisy-Chain Topology

  • Dual Watchdog

  • Wide Operating Temperature Range: -25 ~ +75°C

  • Built-in I/O

    • 3-Axis 32-bit encoder/counter inputs

    • 1 MHz max. for Quadrant mode

    • 4 MHz max. for CW/CCW, Pulse/Direction mode

    • Count Value Retention for 10 years

Introduction

The ET-7083/PET-7083 is a 3-axis high speed encoder/counter module. Its each axis can be individually configured for Quadrant, Pulse/Direction or CW/CCW counting modes. The maximum input rate for Quadrant counting mode is 1 MHz, and for Pulse/Direction, CW/CCW counting modes is 4 MHz.

The encoder/counter module is equipped a FRAM to retain the counter value after it is powered off. FRAM is a nonvolatile memory that can hold written data even after it is powered off. The data retention can be 10 years. And the feature can be configured as enabled or disabled.

System Specification

Models

ET-7083

PET-7083

Software

Built-In Web Server

Yes

Web HMI

Yes

I/O Pair Connection

Yes

Communication

Ethernet Port

1 x RJ-45, 10/100 Base-TX

PoE

-

Yes

Protocol

Modbus/TCP, Modbus/UDP

Security

ID, Password and IP Filter

Dual Watchdog

Yes, Module (0.8 second), Communication (Programmable)

LED Indicators

for System Running

Yes

for Ethernet Link/Act

Yes

for DI/DO status

-

for PoE Power

-

Yes

2-Way Isolation

Ethernet

1500 VDC

-

I/O

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

4 kV Contact for Each Terminal and 8 kV Air for Random Point

EFT (IEC 61000-4-4)

+/-4 kV for Power

Power Requirements

Reverse Polarity Protection

Yes

Powered from Terminal Block

10 ~ 30 VDC

12 ~ 48 VDC

Powered from PoE

-

Yes, IEEE 802.3af, Class1

Consumption

2.7 W

2.7 W

Mechanical

Dimensions (W x L x H)

72 mm x 123 mm x 35 mm

Installation

DIN-Rail or Wall mounting

Environmental

Operating Temperature

-25 ~ +75°C

Storage Temperature

-30 ~ +80°C

Humidity

10 ~ 90% RH, Non-condensing

I/O Specification

Encoder/Counter

Axis

3

Counting Mode

Quadrant

CW/CCW

Pulse/Direction

Maximum Count

32-bit

Maximum Counting Rate

Quadrant mode: 1 MHz

CW/CCW mode: 4 MHz

Pulse/Direction mode: 4 MHz

Count Value Retention

Yes, for 10 years

Counter Preset Value

Programmable

Input Signal Level

5 VDC

12 VDC with 1k ohm external resistor (1/2 W)

24 VDC with 2k ohm external resistor (1/2 W)

Intra-module Isolation, Field to Logic

2500 Vrms

Download

Download Center

Data sheet

Certification

Odering information

ET-7083 CR

Ethernet I/O Module with 3-ch Encoder/Counter Inputs (RoHS)

PET-7083 CR

PoE Ethernet I/O Module with 3-ch Encoder/Counter Inputs (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: