Card PCI 1 cổng CAN ICP DAS PCM-CM100-D

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PCM-CM100-D Intelligent CAN interface with one Isolated Protection CAN Communication Port and 9-Pin D-sub connector for PCI-104 bus systems

Gọi 0904251826 để được trợ giúp

Card PCI 1 cổng CAN ICP DAS PCM-CM100-D

The CAN (Controller Area Network) is a serial communication protocol, and efficiently supports distributed real-time control with a very high level of security. It is an especially suited for networking "intelligent" devices as well as sensors and actuators within a system or sub-system. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted.

ICP DAS provides an open architecture platform for CAN bus PCM-CM100-D. The PCM-CM100-D represents a very powerful and economic solution of an active CAN board with one CAN channels, covering a wide range of CAN applications. The 16-bit on-board microcontroller allows, among many other features, the filtering, preprocessing, and storage (with timestamp) of CAN messages as well as the real-time transmission of CAN messages. PCM-CM100-D also uses the new Phillips SJA1000T and Transceiver 82C250/251, which provide bus arbitration and error detection with auto correction and re-transmission function. Under the effect of the powerful microcontroller, this card can be made for one CAN controller without losing data, even in systems with a high bus load. Besides, equipped with integrated intelligence functions, the PCM-CM100-D makes it is possible to preprocess CAN data streams, thus relieving the PC of a considerable burden. As a result, real-time requirements on the PC applications are drastically reduced. Due to the state-of-the-art, it can be installed in a PCI-104 bus and supported truly “Plug & play” technology.

In addition, users can develop their own CAN application by using the PCM-CM100-D library. When the PCM-CM100-D is active, the data exchange between users’ application and can bus firmware is performed via the memory mapping method of the PCM-CM100-D.

Applications

 

  • DeviceNet, CANopen, CAN J1939, SDS (System Wide Network) protocol application.

  • CAN bus communication application. .

  • Industry automation • Industrial Machinery

  • Building Automation

  • Food & Beverage

  • Semiconductor Fabrication

  • Control system

Features

 

  • PCI-104 compliant

  • Compatible with CAN specification 2.0 part A and B

  • Fully compatible with the ISO 11898-2 standard

  • Support several kinds of baud rate from 10 kbps ~ 1 Mbps

  • 2500 Vrms photocoupler isolation on the CAN side

  • Built-in jumper for 120 Ω terminator resistor of CAN bus

  • 3 kV galvanic isolation

  • 80186, 80MHz CPU inside

  • Allow users to program their special firmware

  • Provide VB, VC++, Delphi, Borland C++ builder demos

  • Timestamp with at least ±1ms precision

Hardware Architecture

Software Architecture

Software Utility Features

Windows Drivers:

  • Development Toolkit for Windows 2000/XP/7(32-bit/64/bit OS)

  • Demos for VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0

Windows Tools:

  • CANUility (Include send/receive CAN messages, message ID filter, data format transformation, messages recoder and firmware update functions)

  • Debug tool

MiniOS7 Tools:

  • C/C++ Library for RTC, EEPROM, LED, DPRAM, CAN controller and timers control functions

  • Demos for TC, TC++, BC and BC++

Hardware Specifications

 

Hardware

CPU

80186, 80 MHz or compatible

SRAM/Flash/EEPROM

512 KB / 512 KB / 16 KB

DPRAM

8 KB

NVRAM

31 bytes (battery backup, data valid for up to 10 years)

RTC (Real Time Clock)

Yes

Bus Interface

Type

PCI-104

Board No.

By DIP switch

CAN Interface

Controller

NXP SJA1000T with 16 MHz clock

Transceiver

NXP 82C250

Channel number

1

Connector

9-pin male D-Sub

Baud Rate (bps)

10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)

Isolation

3000 VDC for DC-to-DC, 2500 Vrms for photo-couple

Terminator Resistor

Jumper for 120 Ω terminator resistor

LED

Round LED

Rx/Tx LED, ERR LED

Power

Power Consumption

400 mA @ 5 V

Software

Driver

Windows 2K/XP/7/8 (32-bit/64-bit OS)

Library

VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0

Mechanism

Dimensions

90mm x 96mm (L X W)

Environment

Operating Temp.

0 ~ 60 ℃

Storage Temp.

-20 ~ 70 ℃

Humidity

5 ~ 85% RH, non-condensing

Download

Pin

Manual

Software

Data sheet

Certification

FAQ

Ordering Information

 

PCM-CM100-D

Intelligent CAN interface with one Isolated Protection CAN Communication Port and 9-Pin D-sub connector for PCI-104 bus systems

Optional Accessories

 

CNT-CAN

CAN bus Connector

CA-0910-C

9-pin Female D-sub & 3-wire CAN bus cable (1M)

SG-770

7/14 channel Surge Protector

4PCD-002

EMI Ferrite Split/Snap-On Core

M12A-5P-IP68

Field-Installation A-coded 5-pin Female

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: