PCIe-LM4 CR: Card PCI Express 4 kênh đầu vào Load Cell + 4 kênh đầu vào Analog + 2 kênh đầu ra xung Encoder + 2 kênh đầu ra Analog + 16 kênh đầu vào số DI + 16 kênh đầu ra số DO

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PCIe-LM4 CR:  PCI Express, 24-Bit Precision Load Cell Input Motor Board (RoHS)

Gọi +84 904251826 để được trợ giúp

PCIe-LM4 CR: Card PCI Express 4 kênh đầu vào Load Cell + 4 kênh đầu vào Analog + 2 kênh đầu ra xung Encoder + 2 kênh đầu ra Analog + 16 kênh đầu vào số DI + 16 kênh đầu ra số DO

Features

  • Supports PCI Express x1
  • CardID (SMD Switch)
  • 4-channel Load Cell Transducer Input
  • 4 Differential general analog input Channels
  • 2-axis pulse output and encoder
  • 2-channel 16-bit analog output
  • 16-channel Isolated Digital Input and 16-channel Isolated Digital output

Introduction

The PCIe-LM4 is a powerful multifunction board based on the PCI Express. Equipped with four strain gauge input channels, four general analog input channels, a 2-axis motion controller, two analog output channels, sixteen isolated digital input channels and sixteen isolated digital output channels.
The PCIe-LM4 also adds a Card ID switch. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PCIe-LM4 cards in one computer.
These cards support various OS versions, such a Windows 32/64-bit Windows 7/8/10. DLL together with various language sample programs based on Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.




Accessories

Specification

Hardware
Card ID Yes (4-bit)
Connector SCSI VHDCI 68-pin x 2

 

Encoder Input
Ring Counter Mode 32-bit
No. of Axes 2-axis
Mode A/B pulse, Up/Down
Isolation 3 KVrms
Counting Rate 12 MHz (Max.)
Counter Width 32-bit

 

Pulse Output
No. of Axes 2-axis
Mode CW/CCW, PULSE/DIR
Isolation 3 KVrms
Rate 4 MHz (Max.)

 

Analog Input
Channels 4 differential (General)
4 (Load Cell Transducer)
Range ±227 mV (Load Cell Transducer)
±10 V, ±5 V, ±2.5 V, ±1.25 V(General)
Resolution 24-bit
Accuracy 0.05% of FSR ±1 LSB @ 25°C, ±10 V
Sampling Rate 15 kS/s
Input Impedance 10,000 MΩ/4 pF
Overvoltage Protection Continuous ±35 Vp-p
Trigger Mode Software
Data Transfer Polling

 

Analog Output
Channels 2
Range ±5 V, ±10 V
Resolution 16-bit
Accuracy ±10 LSB
Voltage Output Capability ±5 mA
Response Time 500 kS/s (Max.)
Slew Rate 2.8 V/µs
FIFO Size 512 Samples
Operation Mode Static update, Waveform generation

 

Digital Input
Channels 16
Type Sink or Source, Photo coupler isolated channel with common power or ground
Response Speed 4 kHz (Typical)
Trigger Mode Static Update
Data Transfer Polling
Wet Contact, ON Voltage Level 5 ~ 24 V
Wet Contact, OFF Voltage Level 0 ~ 1 V
Isolation 2500 VDC

 

Digital Output
Channels 16
Sink/Source (NPN/PNP) Sink, Open Drain
Operation Mode Static Update
Max. Load Current 100 mA/+ 30V for each channel @100% duty
Response Speed 4 kHz (Typical)
Isolation 2500 VDC
DO Readback No

 

Timer/Counter/Frequency
Channels 2

 

PC Bus
Type PCI Express x 1
Data Bus 32-bit

 

Power
Consumption 1 A @ +5 V

 

Mechanical
Dimensions (mm) 102 x 149 x 22 (W x L x D)

 

Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing

Ordering information

PCIe-LM4     CR  PCI Express, 24-Bit Precision Load Cell Input Motor Board (RoHS)  

Download

Data Sheet

Documents

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: