Carrd PCI bộ nhớ 512 KB ICP DAS PCI-M512

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PCI-M512 CR PCI, 512 KB Memory Board with DI/O (RoHS)

Gọi 0904251826 để được trợ giúp

Carrd PCI bộ nhớ 512 KB  ICP DAS PCI-M512

Features

  • On-board 512 KB SRAM

  • Two Li-batteries, BT1 & BT2, for dual battery-backup the data of the SRAM

  • LED indicators for Li-batteries states: normal, low voltage, fault

  • 16-bit general purpose TTL-compatible D/O

  • 12-bit general purpose TTL-compatible D/I (DI4 ~ 15)

  • 4-bit battery status read back (DI0 ~ 3)
    [PCI-M512 only]

  • PCI card, supports 5 V PCI bus.
    [PCI-M512U only]

  • Universal PCI card, supports both 5 V and 3.3 V PCI bus.

Introduction

The PCI-M512/PCI-M512U provides battery-backup 512 KB SRAM, 12-bit DI and 16-bit DO. In addition, the PCI-M512U supports both 5 V and 3.3 V PCI bus, while the PCI-M512 supports 5 V PCI bus only. The PCI-M512U (Universal PCI version) is designed as a drop-in replacement for the PCI-M512 (PCI version), so users can replace a PCI-M512 by a PCI-M512U directly without any software or driver modification.

Users can use the DB-16P to connect the input ports (CN2) for isolation purpose, or use DB-16R to interface to the output ports (CN1) for relay control.

The PCI-M512/PCI-M512U is equipped with two Li-batteries to maintain the content of the 512 KB SRAM when PC power loss occurs. The two Li-batteries can continue supplying power to the SRAM to retain the important data for 10 years. The two-battery design also makes it safe to replace new batteries without losing data; when one battery is taken out for replacing a new one, the other continues to provide power to the SRAM.

4 LED indicators on the board are provided for giving clear understanding of the battery states such as normal, low voltage or fault. The PCI-M512/PCI-M512U is an ideal solution for improving system reliability.

Software

  • DOS Lib and TC/BC/MSC sample program (with source codes)

  • DLL and OCX SDK for Windows 98/NT/2000

  • DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.

  • VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.

  • LabVIEW toolkit for Windows.

  • Driver for Linux.

Specification

Model Name

PCI-M512

PCI-M512U

Dgital Input

Channels

12

Compatibility

5 V/TTL

Input Voltage

Logic 0: 0.8 V max.
Logic 1: 2.0 V min.

Response Speed

1.4 MHz (Typical)

Digital Output

Channels

16

Compatibility

5 V/TTL

Output Voltage

Logic 0: 0.4 V max.
Logic 1: 2.4 V min.

Output Capability

Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V

Response Speed

1.4 MHz (Typical)

Special

SRAM Size

512 KB

Li-Battery

BT1 & BT2

Battery Status bits

BT1 Low, BT1 Bad, BT2 Low, BT2 Bad(low voltage=2.3 V, bad voltage=2.1 V)

LED Indicators

BT1 Low (Green), BT1 Bad (Red) BT2 Low (Green), BT2 Bad (Red)

General

Bus Type

5 V PCI, 32-bit, 33 MHz

3.3 V/5 V Universal PCI, 32-bit, 33 MHz

Data Bus

16-bit(DI/DO), 32-bit(Memory)

I/O Connector

Male 20-bit ribbon x 2

Dimensions (L x W)

140 mm x 90 mm

Power Consumption

420 mA @ +5 V

Operating Temperature

-20 ~ 60 °C

Storage Temperature

-40 ~ 85 °C

Humidity

0 ~ 90% RH, non-condensing

Download

Manual

Pin

Data sheet

Software

FAQ

Certification

Odering information

PCI-M512 CR

PCI, 512 KB Memory Board with DI/O (RoHS)

PCI-M512U CR

Universal PCI, 512 KB Memory Board with DI/O (RoHS)

Accessories

CA-2010

20-pin flat cable,1 M

CA-2020

20-pin flat cable 2 M

DB-16P

16-channel Isolated Digital Input Daughter Board

DB-16R

16-channel Relay Output Daughter Board

DB-24PR

24-channel power relay board

DB-24POR

24-channel Photo Mos relay output board

DB-24C

24-channel open-collector output board

2LB004

BR2032 LITHIUM BATTERY, 3V, COIN CELL

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: