Switch công nghiệp 8 cổng Ethernet + 1 cổng quang Single-mode SC ICP DAS NSM-209FCS

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Unmanaged 8-Port Industrial 10/100 Base-T with 100 Base-FX Fiber Switch with SC Connector; Single-mode

Gọi 0904251826 để được trợ giúp

Switch công nghiệp 8 cổng Ethernet + 1 cổng quang Single-mode SC ICP DAS NSM-209FCS


nsm-209fThe NSM-209FCS (SC Connector; Single-mode) is a Unmanaged 8-Port Industrial Ethernet(10/100Base-TX) with Fiber (100Base-FX) Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 15 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

The NSM-209FCS operates at full duplex mode. In full duplex mode, range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fiber cables.

The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

NSM-209FCS provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-209FCS's power needs.


  • Automatic MDI / MDI-X crossover for plug-and-play

  • Each port supports both 10/100 Mbps speed auto negotiation

  • Store-and-forward architecture

  • Full duplex IEEE 802.3x and half duplex backpressure flow control

  • 3.2 Gbps high performance memory bandwidth

  • Redundant Power Inputs +10 ~ +30V DC 
    Power failure alarm by relay output

  • Supports operating temperatures from 0 ~ +70°C

  • IP20, rugged high-strength metal case

  • DIN rail mount for industrial usage




IEEE802.3, 802.3u, 802.3x

Processing Type

Store & forward wire speed switching - no delays

MAC Addresses


Memory Bandwidth

3.2 Gbps

Flow Control

IEEE802.3x flow control, back pressure flow control


RJ45 port

10/100BaseT(X) auto negotiation speed, F/H duplex mode, 
and auto MDI/MDIX connection

Fiber Optic port

100 Base-FX(Single-mode; SC connector)

LED Indicators

10/100M, Link/Act, Full duplex/Half duplex(Fiber Port)

Ethernet Isolation

1500 Vrms 1 minute

Frame Ground for EMS Protection


Fiber Optic

Single-mode fiber cables:8.3/125, 8.7/125, 9/125 or 10/125 μm

Distance :15 km, (9/125 μm recommended) for full duplex

Wavelength : 1300 or 1310nm

Min. TX Output:- 15 dBm

Max. TX Output: -8 dBm

RX Sensitivity: -36 to -31 dBm

Ethernet Transmission distance

Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm

Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm


Redundant Input Range

+10 ~ +30VDC (Non-isolation)

Alarm Contact

One relay output with current carrying capacity of 2A @ 30 VDC

Power consumption

0.17A@24VDC, +/- 5% arrowed with 100M Full duplex

LED Indicators

Power input1, Power input2, Power fail


Power reverse polarity protection

Frame Ground for EMS Protection



7-Pin Removable Terminal Block




Environmental rating



72.5mm x 110mm x 102mm (W x H x D)


DIN rail mount; Wall Mounting


Operating Temperature

0 ~ +70°C

Storage Temperature

-20 ~ +85°C

Ambient Relative Humidity

10% to 90% non-condensing

Reference & Support

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: