-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
*For Single Mode Use* Unmanaged 4 Port Industrial 10/100 BaseT Ethernet with Dual 100 BaseFX Fiber Optic Switch with SC Connector
Switch công nghiệp 4 cổng Ethernet + 2 cổng quang Single-mode SC ICP DAS NSM-206FCS
The NSM-206FCS (SC Connector; Single-mode) is an unmanaged, 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It uses Ethernet for transmitting a signal up to 15 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion. The NSM-206FCS operates at full duplex mode. In full duplex mode, range is 15 Km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fiber cables. The NSM-206FCS can extend your LAN in a daisy chain configuration. Please refer to User's Manual. NSM-206FCS provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-206FCS's power needs.
Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
1.6 Gbps high performance memory bandwidth
Redundant Power Inputs +10 ~ +30V DC
Power failure alarm by relay output
Supports operating temperatures from 0°C ~ +70°C
IP20, rugged high-strength metal case
DIN-Rail; Wall Mounting
Compatibility : IEEE 802.3, IEEE802.3u, IEEE802.3x
Frame buffer memory :256 Kbit
Address Table Size : 1K uni-cast addresses
Interface : 10/100 Base-(X) and 100 Base-FX (SC Connector; Single-mode)
Ethernet Port : 10/100 Mbps x 4
Fiber Optic Port : 100 Mbps x 2 (SC Connector)
Provides LEDs for network and power monitoring
ESD Protection:
4 KV Contact Discharge
8 KV Air-Gap Discharge
Fiber Optic Transmission distance:
Single mode fiber cables : 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance : 15 km, 1300 ~ 1310 nm (9/125 μm)
Min. TX Output : -15 dBm
Max. TX Output : -8 dBm
Sensitivity : -36 to -31 dBm
Ethernet Cables:
10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
100 Base-TX (Cat.5 UTP cable; 100m Max.)
General Environment:
Operating temperature : 0°C ~ +70°C
Storage Temperature: -20°C ~ +85°C
Relative Humidity : 10% to 90% non-condensing
Dimensions : 72.5mm x 110mm x 104mm (W x H x D)
Power requirements : +10 to 30Vdc (Removable Terminal Block)
Alarm Contact: One relay output with current carrying capacity of 2A @ 30 VDC
Power consumption : 0.24A@24Vdc (± 5%, arrowed)
Số lượng:
Tổng tiền: