Switch công nghiệp 4 cổng PoE Ethernet + 1 cổng quang Multi-Mode ST ICP DAS NSM-205PFT

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Multi-mode, ST Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal cas

Gọi 0904251826 để được trợ giúp

Switch công nghiệp 4 cổng PoE Ethernet + 1 cổng quang Multi-Mode ST ICP DAS NSM-205PFT

Features

Introduction

The NS-205PFx/NSM-205PFx is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PFx/NSM-205PFx makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and highdistance (up to 60 km) transmissions.

Features

  • Provides 1 x 100-FX fiber port plus 4 x PoE ports

  • Automatic MDI/MDI-X crossover for plug-and-play

  • Each port supports both 10/100Mbps speed auto negotiation

  • Store-and-forward architecture

  • Full duplex IEEE 802.3x and half duplex backpressure flow control

  • 4 PoE ports with Power Sourcing Equipment (PSE) operation

  • Auto-detection of PD (powered devices) and automatic power management

  • Over-temperature, over-current and over/under-voltage detection

  • Power Input, +46 ~ +55 VDC

  • Supports operating temperatures from –30 ~ +75°C

  • DIN-Rail

Specifications

Models

NSM-205PFx series

Technology

Standards

IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)

Processing Type

Store & forward, wire speed switching

MAC Addresses

1024

Memory Bandwidth

3.2 Gbps

Frame Buffer Memory

512 Kbit

Flow Control

IEEE802.3x flow control, back pressure flow control

Interface

RJ-45 Ports

10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection

LED Indicators

Power, Link/Act , 10/100M, Power Device is detected

Ethernet Isolation

1500 Vrms 1 minute

+/-6 kV EMS Protection

Yes

Fiber Interface (100 Base-FX; SC/ST type)

Multi-Mode
(NS-205PFT/FC)

Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm
Distance :2 km, (62.5/125 μm recommended) for full duplex
Wavelength : 1300 or 1310nm
Min. TX Output:- 20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Max. RX Overload: -8 dBm
Budget: 12 dBm

Single-Mode
(NS-205PFCS)

Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Distance: 30 Km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Max. RX Overload: -5 dBm
Budget: 19 dBm

Single-Mode
(NS-205PFCS-60)

Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Distance: 60 Km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Max. RX Overload: -5 dBm
Budget: 30 dBm

Power Input

Input Voltage Range

+46 ~ +55 VDC for PoE output

Power Consumption

0.08@ 48 VDC without PD loading

Protection

Power reverse polarity protection

Frame Ground for EMS Protection

Yes

Connection

3-Pin Removable Terminal Block

PoE Output

PoE Compliance

100% IEEE 802.3af compliant

PoE Classification

PSE (Power Sourcing Equipment)

PoE Voltage

+48 VDC depending on power input

PoE Power

Up to 15.4 watts per channel

PoE Operation

Automatic detection and power management

Mechanical

Casing

Metal (IP30 Protection)

Dimensions (W x L x H)

25 mm x 168 mm x 119 mm

Installation

DIN-Rail

Environmental

Operating Temperature

-30 °C ~ +75 °C

Storage Temperature

-40 °C ~ +85 °C

Ambient Relative Humidity

10% ~ 90% RH, non-condensing

Reference & Support

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: