NSM-200SX Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 850 nm, 0.55 km, SC connector

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Provides 1 x 1000 Mbps fiber port with SC type connector for 1000 Base-SX/LX device
Supports wide operating temperatures from -30 °C ~ +75 °C
Transparent to jumbo packets up to 10 KB
Pr

THÔNG TIN SẢN PHẨM

NSM-200SX Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 850 nm, 0.55 km, SC connector

Models		NS-200AFC-T	NS-200AFT-T	NS-200AFCS-T	NS-200AFCS-60T
Technology
Standards		IEEE 802.3, 802.3u, 802.3x
Processing Type		Store & forward, wire speed switching
MAC Addresses		1024
Memory Bandwidth		1.4 Gbps
Frame Buffer Memory		256 Kbit
Flow Control		IEEE 802.3x flow control, back pressure flow control
Interface
RJ-45 Ports		10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Port		100 Base-FX
LED Indicators		10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ethernet Isolation		1500 Vrms 1 minute
Multi Mode	Multi mode fiber cables	50/125, 62.5/125 or 100/140 μm		–
	Distance	2 km, (62.5/125 μm recommended) for full duplex		–
	Wavelength	1300 or 1310nm		–
	Min. TX Output	- 20 dBm		–
	Max. TX Output	-14 dBm		–
	Max. RX Sensitiv	-32 dBm		–
	Max. RX Overload	-8 dBm		–
	Budget	12 dBm		–
Single Mode	Single-mode fiber cables	–		8.3/125, 8.7/125, 9/125 or 10/125μm
	Distance	–		30 Km	60 Km
	Wavelength	–		1300 or 1310nm
	Min. TX Output	–		- 15 dBm	-5 dBm
	Max. TX Output	–		-8 dBm	0 dBm
	Max. RX Sensitivity	–		-34 dBm	-35 dBm
	Max. RX Overload	–		-5 dBm
	Budget	–		19 dBm	30 dBm
Ethernet Transmission Distance	Ethernet	2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 Ω
	Fast Ethernet	2-pair UTP/STP Cat. 5, EIA/TIA-568 100 Ω
Power
Input Voltage Range		+12 VDC ~ +48 VDC (Non-isolation)
Power Consumption		0.12 A @ 24 VDC
LED Indicator		Yes
Protection		Power reverse polarity protection
Frame Ground for EMS Protection		Yes
Mechanical
Casing		Plastic (Flammability UL 94V-0)
Dimensions (W x L x H)		33 mm x 85 mm x 107 mm
Installation		DIN-Rail
Environment
Operating Temperature		-30 °C ~ +75 °C
Storage Temperature		-30 °C ~ +85 °C
Ambient Relative Humidity		10% ~ 90% RH, non-condensing

NSM-200SX Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 850 nm, 0.55 km, SC connector

NSM-200SX Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 850 nm, 0.55 km, SC connector

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng