MSM-508 CR: Switch công nghiệp quản lý Layer-2 8 cổng Ethernet

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

MSM-508 CR 8-port Layer 2 Managed Switch with metal casing (RoHS)

Gọi +84 904251826 để được trợ giúp

MSM-508 CR: Switch công nghiệp quản lý Layer-2 8 cổng Ethernet

Features

• Automatic MDI/MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Supports wide operating temperature -40 °C ~ +75 °C
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 3.2 Gbps high performance memory bandwidth
• Redundant Dual Power Inputs +12 VDC ~ +48 VDC
• Power failure alarm by relay output
• Frame buffer memory: 1 Mbit
• 2048 MAC addresses
• Store-and-forward architecture
• DIN-Rail Mounting
• Modbus remote monitoring
• Supports Modbus OPC Server
• Built-in Cyber-Ring redundant technique

Introduction

The MSM-508 is an 8-port Industrial Ethernet (10/100 Base-TX) Layer 2 Managed Switch. MSM-508 supports 10/100M auto negotiation feature and auto MDI/MDI-X function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.

It can be managed through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Portbased VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically the switch detects and recovers from a copper link failure within approximately 20 ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.

MSM-508 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the it's power needs. And the relay output facility can deliver warning signal while power or network link failure.

Introduction

LED Indicators
Status Power, 10/100M, Link/Act, Master

 

Ethernet
Ports 8 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Redundant Strategy STP, Ring (ICP DAS)
Isolation 1500 Vrms 1 minute
DIP Switch Yes, Normal Run / Repair Mode

 

Digital Input
Channels 3
Type Wet Contact
Wet Contact, ON Voltage Level +19 VDC ~ +30 VDC
Wet Contact, OFF Voltage Level +11 VDC Max.

 

Digital Output
Channels 3
Type Open Collector
Sink/Source (NPN/PNP) Sink/NPN
Max. Load Current 30V/100 mA Max.

 

COM Ports
Ports 1 x RS-232 (Console)
1 x RS-485

 

Power
Reverse Polarity Protection Yes
Input Range +12 ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Redundant Power Inputs Yes
Consumption 0.25 A @ 24 VDC
Alarm Contact Yes,Relay 2 A @ 30 VDC

 

Mechanical
Casing Metal
Dimensions (mm) 47 x 175 x 128 (W x L x H)
Installation DIN-Rail Mounting or Wall mounting
Ingress Protection Rating IP30

 

Environmental
Operating Temperature -40 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10 ~ 90% RH, non-condensing

Download

Data Sheet

Documents

Ordering information

MSM-508     CR  8-port Layer 2 Managed Switch with metal casing (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: