Module 2 kênh đầu vào số + 2 kênh đầu ra Photo-Mos Relay kết nối Ethernet Modbus TCP/IP ICP DAS tET-P2POR2

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Tiny Ethernet module with 2 Digital Input channels (32-bit Counters) and 2 PhotoMos Relay Form A channels communicable over Ethernet and Modbus TCP protocol, supports operating temperatures from -25°C ~ +75°C (-13°F ~ +167°F)

Gọi 0904251826 để được trợ giúp

Module 2 kênh đầu vào số + 2 kênh đầu ra Photo-Mos Relay kết nối Ethernet Modbus TCP/IP ICP DAS tET-P2POR2


Providing various digital I/O functions, the tET/tPET series is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tET/tPET series perfectly integrate with the HMI, SCADA, PLC and other software systems.

The functionality of the tET/tPET series is almost the same as the ET-7000/PET-7000 series. The tET/tPET series tiny Ethernet I/O modules support various I/O types, like photo-isolated digital input, relay contact, photoMOS relay, and open-collector output. The module can be used to create DI to DO pair-connect through the Ethernet. Once the configuration is completed, the tET/tPET series module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.

The tET/tPET series provides dual watchdog: CPU watchdog and host watchdog. The CPU watchdog automatically resets it-self when the built-in firmware runs abnormally. The host watchdog monitors the host controller (PC or PLC), and the output of the module can go to predefined state (safe value) when the host fails.

For maximum space savings, the tET/tPET series is offered in an amazing tiny form-factor that means it can be easily installed in anywhere, even directly embedded into a machine. It is equipped with two removable terminal block connectors for easy wiring, and features a powerful 32-bit ARM MCU to handle efficient network trafficking. The tPET series offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. When there is no PoE switch on site, the tPET series accepts power input from DC adapter.


  • Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)

  • Contains a 32-bit MCU that efficiently handles network traffic

  • 10/100 Base-TX Ethernet, RJ-45 x1 (Auto-negotiating, Auto MDI/MDIX, LED Indicator)

  • Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols

  • Supports UDP responder for device discovery

  • Supports web configuration and firmware update via Ethernet

  • Isolated digital input and output

  • Supports latched DI and 32-bit high-speed counter functions

  • Supports I/O pair-connection through the Ethernet

  • Dual-watchdog with power-on and safe value

  • Tiny form-factor with easy DIN-Rail mounting

  • RoHS compliant with no Halogen

  • Made from fire retardant materials (UL94-V0 Level)

  • Low power consumption (about 1.7 W only)


  • Factory, Building and Home Automation

  • Remote Maintenance




32-bit MCU

Dual Watchdog



Ethernet Port

10/100 Base-TX, 8-Pin RJ-45 x1, 
(Auto-negotiating, Auto-MDI/MDIX, LED indicator)


LED Display



System indicator (Red)


Link/Act indicator (Green)

10/100 M indicator (Yellow)



52 mm x 27 mm x 98 mm


DIN-Rail mounting


Operating Temperature

-25 °C ~ +75 °C

Storage Temperature

-30 °C ~ +80 °C


10 ~ 90 % RH, non-condensing

Power Requirements

Power Input


Terminal block: +12 ~ 48 VDC (non-regulated)

Power Consumption

0.04 A @ 24 VDC for tET-P2R2

I/O Specifications

Digital Input

Input Channels


Input Type (Device)

Wet Contact (Sink, Source)

On Voltage Level

+10 VDC ~ +50 VDC

Off Voltage Level

+4 VDC max.

Input Impedance

10 k Ohm


Max. Count: 4,294,967,285 (32 bits)

Max. Input Frequency: 3.5 kHz (without filter)

Min. Pulse Width: 0.15 ms

Frequency Measurement

1 ~ 3.5 kHz in Mode "1000 ms", (+/- 1 Hz error)
10 ~ 3.5 kHz in Mode "100 ms", (+/- 10 Hz error)
0.01 ~ 1 Hz in Mode "Single-pulse", (+/- 0.01 Hz error)

Overvoltage Protection

+70 VDC


3750 Vrms

Relay Output

Output Channels


Output Type (Module)

PhotoMOS Relay, Form A

Load Voltage


Load Current

60 V/1.0 A (Operating Temperature -25°C ~ -40°C)

60 V/0.8 A (Operating Temperature +40°C ~ +60°C)

60 V/0.7 A (Operating Temperature +60°C ~ +75°C)

Turn ON Time

1.3 ms (Typical)

Turn Off Time

0.1 ms (Typical)

Output Isolation

3000 Vrms

Output Voltage Range


Max. Load Current


Operate Time


Release Time



100Hz max
The unit of duty cycle is 1 ms, and the resolution is about 5 ms.(5~65535 ms)

Electrical Life (Resistive load)







Mechanical Life


 Note: Because the characteristic of relay, the relay-type modules are not suitable to use PWM for a long time.


Reference & Support

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: