MDR-60-48 48V/1.25A, 60W Single Output Industrial DIN Rail Power Supply

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

48V/1.25A, 60W Single Output Industrial DIN Rail Power Supply, voltage range 85 ~ 264VAC, 120 ~ 370VDC

Gọi 0904251826 để được trợ giúp

MDR-60-48  48V/1.25A, 60W Single Output Industrial DIN Rail Power Supply







  • Universal AC input/Full range
  • Protections: Short circuit / Overload / Over voltage
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • NEC class 2 / LPS compliant (48V only)
  • LED indicator for power on
  • DC OK relay contact
  • No load power consumption<0.75W
  • 100% full load burn-in test


    Voltage range 85 ~ 264VAC
    120 ~ 370VDC
    Frequency range 47 ~ 63Hz
    Efficiency (Typ.) 87%
    AC Current (Typ.) 1.8A/115VAC
    Inrush Current (Typ.) Cold Start 30A/115VAC
    Leakage current <1mA / 240VAC
    DC Voltage 48V
    Rated Current 1.25A
    Current Range 0 ~ 1.25A
    Rated power 60W
    Ripple & noise (max.)  Note.2 200mVp-p
    Voltage ADJ. range 48 ~ 56V
    Voltage Tolerance        Note.3 ±1.0%
    Line Regulation ±1.0%
    Load regulation ±1.0%
    Setup, rise Time           Note.5 500ms, 30ms/230VAC     
    500ms, 30ms/115VAC at full load
    Hold up time (Typ.) 50ms/230VAC     
    20ms/115VAC at full load
    Overload 105 ~ 150% rated output power
    Protection type : Constant current limiting, recovers automatically after fault condition is removed
    Over voltage 57.6 ~ 64.8V
    Protection type : Shut down o/p voltage, re-power on to recover
    DC OK signal Relay contact rating(max.): 30V/1A resistive
    Working temp. -20 ~ +70°C (Refer to output load derating curve)
    Working humidity 20 ~ 90% RH non-condensing
    Storage TEMP., humidity -40 ~ +85°C , 10 ~ 95% RH
    TEMP. Coefficient ±0.03%/°C (0 ~ 50°C)
    Vibration Component : each along X, Y, Z axes ; 
    Mounting : Compliance to IEC60068-2-6 10 ~ 500Hz, 2G 10min./1cycle, period for 60min.
    Safety & EMC (Note 4)
    Safety standards UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant (24V,48V only)
    Withstand voltage I/P-O/P:3KVAC      I/P-FG:1.5KVAC      O/P-FG:0.5KVAC
    Isolation resistance I/P-O/P, I/P-FG, O/P-FG:>100M Ohms/500VDC 25°C 70%RH
    EMI Conduction & Radiation Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B
    Hsrmonic current Compliance to EN61000-3-2,-3
    EMS immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
    DC OK Relay Contact
    Contact Close When the output voltage reaches the adjusted output voltage.
    Contact Open When the output voltage drop below 90% output voltage.
    Contact Ratings (max.) 30V/1A resistive load
    MTBF 299.2K hrs min.
    MIL-HDBK-217F (25°C)
    Dimension (WxHxD) 40mm x 90mm x 100mm
    Packing 0.33Kg; 42pcs/14.8Kg/0.82CUFT

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: