Module 4 kênh đầu vào số + 4 kênh đầu ra Relay kết nối RS-485 DCON & Modbus RTU M-7060D

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

M-7060D-G CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols with LED Display (Gray Cover) (RoHS)

Gọi 0904251826 để được trợ giúp

Module 4 kênh đầu vào số + 4 kênh đầu ra Relay kết nối RS-485 DCON & Modbus RTU M-7060D

Features

  • I-7060(D)/M-7060(D)

    • 2 Form A and 2 Form C Signal Relay Output

    • ±2 kV EFT protection for Power Line

  • M-7060P(D)

    • 2 Form A and 2 Form C Power Relay Output

    • ±4 kV EFT protection for Power Line

    • ±3 kV Surge protection for Power Line

  • Sink- and Source-type for Digital Input

  • Digital Input Channels can be used as 16-bit Counters

  • Configurable Power-on Value Settings

  • Configurable Safe Value Settings

  • Dual Watchdog

  • Wide Operating Temperature Range: -25 ~ +75°C

Introduction

The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output channels, while the M-7060P provides 4 digital input channels, 2 Form A and 2 Form C power relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. The “D” versions of the 7060 series provide eight LED indicators that can be used to monitor the status of the digital input and relay output. The “M” versions of the 7060 series support both the Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The 7060 series is the ideal solution for small signal switching applications, while the M-7060P is the perfect solution for high power applications.

I/O Specification

Model

I-7060

M-7060

M-7060P

I-7060D

M-7060D

M-7060PD

Relay Output

Channels

4 (Form A × 2, Form C × 2)

Relay Type

Signal Relay

Power Relay

Form A Relay

Contact Rating

0.6 A @ 125 VAC
2 A @ 30 VDC

16A @ 250 VAC
10 A @ 30 VDC

Min. Contact Load

10 uA @ 10 mV

100 mA @ 6 V

Contact Material

Gold-plated silver

Silver Tin Alloy

Operate Time

3 ms

10 ms

Release Time

2 ms

5 ms

Mechanical Endurance

1 x 108 ops.

1 x 107 ops.

Electrical Endurance

5 × 105 ops.

1 × 105 ops.

Form C Relay

Contact Rating

0.6 A @ 125 VAC
2 A @ 30 VDC

NO:10 A @ 250 VAC
NC:6 A @ 250 VAC

Min. Contact Load

10 uA @ 10 mV

100 mA @ 6V

Contact Material

Gold-plated silver

Silver Tin Alloy

Operate Time

3 ms

10 ms

Release Time

2 ms

5 ms

Mechanical Endurance

1 x 108 ops.

1 x 107 ops.

Electrical Endurance

5 × 105 ops.

1 × 105 ops.

Surge Strength

1500 VDC

2500 VDC

Power-on Value

Yes

Safe Value

Yes

Digital Input/Counter

Channels

4

Type

Dry Contact

-

Wet Contact

Sink/Source

On Voltage Level

+1 VDC Max.

+4 VDC Max.

Off Voltage Level

+4 ~ 30 VDC

+10 ~50 VDC

Counters

Max. Count

65535 (16-bit)

Max. Input Frequency

100 Hz

Min. Pulse Widt

5 ms

Input Impedance

3 kΩ

10 kΩ

Overvoltage Protection

±35 VDC

±70 VDC

System Specification

Model

I-7060

M-7060

M-7060P

I-7060D

M-7060D

M-7060PD

Communication

Interface

RS-485 Modbus RTU, DCON

Format

(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)

Baud Rate

1200 ~ 115200 bps

Protocol

DCON

Modbus RTU, DCON

Dual Watchdog

Yes, Module (1.6 Seconds), Communication (Programmable)

LED Indicators/Display

System LED Indicator

Yes, 1 LED as Power/Communication Indicator

I/O LED Indicators

-

Yes, 8 LEDs as Digital Input/Relay Output Indicators

7-Segment LED Display

-

Isolation

Intra-Module Isolation, Field-to-Logic

3750 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for each Terminal

±8 kV Air for Random Point

EFT (IEC 61000-4-4)

±2 kV for Power Line

±4 kV for Power Line

Surge (IEC 61000-4-5)

-

±3 kV for Power Line

Power

Reverse Polarity Protection

Yes

Input Range

10 ~ 30 VDC

Consumption

1 W

1 W

1.4 W

1.4 W

1.4 W

1.8 W

Mechanical

Dimensions (W x L x H)

72 mm x 123 mm x 35 mm

Installation

DIN-Rail or Wall Mounting

Environment

Operating Temperature

-25 ~ +75°C

Storage Temperature

-40 ~ +85°C

Humidity

10 ~ 95% RH, Non-condensing

Download

Manual

Data sheet

Software

Addressing Map

FAQ

Certification

Odering information

I-7060 CR

4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Blue Cover) (RoHS)

I-7060-G CR

4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Gray Cover) (RoHS)

I-7060D CR

I-7060 with LED Display (Blue Cover) (RoHS)

I-7060D-G CR

I-7060-G with LED Display (Gray Cover) (RoHS)

M-7060-G CR

4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)

M-7060D-G CR

M-7060-G with LED Display (Gray Cover) (RoHS)

M-7060P-G CR

4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)

M-7060PD-G CR

M-7060P-G with LED Display (Gray Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: