Module 6 kênh đầu vào tương tự + 2 kênh đầu ra tương tự + 3 kênh đầu vào số + 3 kênh đầu ra số kết nối RS-485 Modbus RTU & DCON ICP DAS M-7026

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

M-7026 CR 6-channel Analog Input, 2-channel Analog Output, 3-channel Digital Input and 3-channel Digital Output Module using the DCON and Modbus Protocol (Gray Cover) (RoHS)

Gọi 0904251826 để được trợ giúp

Module 6 kênh đầu vào tương tự + 2 kênh đầu ra tương tự + 3 kênh đầu vào số + 3 kênh đầu ra số kết nối RS-485 Modbus RTU & DCON ICP DAS M-7026

Features

  • Multifunction (6 AI, 2 AO, 3 DI and 3 DO)

  • Supports Fast Mode and Normal Mode

  • Individual Channel Configuration

  • Open Wire Detection for Current Output

  • Overload and Short Circuit Protection for Digital Output

  • Configurable Power-on Value Settings

  • Configurable Safe Value Settings

  • 240 Vrms Overvoltage Protection for Voltage Input

  • Jumper Selectable Voltage or Current Input/Output

  • Dual Watchdog

  • ±4 kV Contact ESD Protection

  • Wide Operating Temperature Range: -25 ~ +75°C

Introduction

The M-7026 is a multifunction module that includes 6 analog input channels, 2 analog output channels, 3 digital input channels, 3 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ +20 mA), analog outputs are 12-bit at +/-5 V, +/-10 V, 0 ~ +20 mA or +4 ~ +20 mA and all digital outputs can be set as alarm output. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Voltage and current inputs/outputs are jumper selectable.

Application

  • Industrial Automation

  • Building Automation

  • Food and Beverage Systems

  • Semiconductor Fabrication

  • Control Systems

  • Industrial Machinery

I/O Specification

Analog Input

Channels

6

Wiring

Differential

Range

±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
±20 mA , 0 ~ 20 mA, 4 ~ 20 mA(Jumper Selectable)

Resolution

16-bit

Accuracy

Normal Mode

±0.1% of FSR

Fast Mode

±0.5% or better

Sampling Rate

Normal Mode

10 Samples/Sec.

Fast Mode

60 Samples/Sec. (Total)

Bandwidth

Normal Mode

15.7 Hz

Fast Mode

78.7 Hz

Input Impedance

Voltage

2 MΩ

Currnet

140 Ω

Common Voltage Protection

±200 V

Individual Channel Configuration

Yes

Overvoltage Protection

240 Vrms

Overcurrent Protection

Yes, 50 mA at 110 VDC

Virtual Channel to Channel Isolation

Yes,400 VDC

Open Wire Detection for 4 ~ 20 mA

Yes

Analog Output

Channels

2

Range

+0 ~ +5 VDC, +0 ~ +10 VDC, ±5 VDC, ±10 VDC,
+0 ~ +20 mA, +4 ~ +20 mA (Jumper Selectable)

Resolution

12-bit

Accuracy

±0.1% of FSR

Output Capacity
Voltage Output Capability

10 V @ 20 mA

Open Wire Detection

Yes, for 4 ~ 20 mA only

Power-on Value

Yes, Programmable

Safe Value

Yes, Programmable

Digital Input/Counter

Channels

3

Type

Dry Contact

Source

Wet Contact

-

Wet Contact

On Voltage Level

-

Off Voltage Level

-

Dry Contact

On Voltage Level

Close to GND

Off Voltage Level

Open

Counters

Max. Count

65535 (16-bit)

Max. Input Frequency

50 Hz

Min. Pulse Width

5 ms

Input Impedance

-

Channel-to-Channel Isolation

-

Overvoltage Protection

-

Safe Value

Yes, Programmable

Digital Output

Output Channels

3

Type

Open Collector

Sink/Source (NPN/PNP)

Sink

Load Voltage

+ 3.5 VDC ~ + 50 VDC

Max. Load Current

700 mA/Channel

Overvoltage Protection

60 VDC

Overload Protection

Yes

Short-circuit Protection

Yes

Power-on Value

Yes, Programmable

Safe Value

Yes, Programmable

System Specification

Communication

Interface

RS-485

RS-485 Bias Resistor

No (An RS-485 master is required to provide the bias.)

Format

N, 8, 1

Baud Rate

1200 ~ 115200 bps

Protocol

Modbus RTU, DCON

Dual Watchdog

Yes, Module (1.6 Seconds), Communication (Programmable)

LED Indicators/Display

System LED Indicator

Yes, 1 LED as Power/Communication Indicator

I/O LED Indicators

-

7-Segment LED Display

-

Isolation

Intra-module Isolation,
Field-to-Logic

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for each Terminal

±8 kV Air for random point

EFT (IEC 61000-4-4)

±4 kV for Power Line

Surge (IEC 61000-4-5)

±3 kV for Power Line

Power

Reverse Polarity Protection

Yes

Input Range

10 ~ 30 VDC

Consumption

1.8 W

Mechanical

Dimensions (W x L x H)

72 mm x 123 mm x 35 mm

Installation

DIN-Rail or Wall Mounting

Environment

Operating Temperature

-25 ~ +75°C

Storage Temperature

-40 ~ +85°C

Humidity

10 ~ 95% RH, Non-condensing

Download

Manual

Data sheet

Software

Addressing Map

FAQ

Certification

Odering information

M-7026 CR

6-channel Analog Input, 2-channel Analog Output, 3-channel Digital Input and 3-channel Digital Output Module using the
DCON and Modbus Protocol (Gray Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: