Module 10 kênh đầu vào tương tự kết nối RS-485 Modbus RTU & DCON ICP DAS M-7018Z

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

M-7018Z-G/S CR 10-channel Thermocouple Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) Includes an M-7018Z Module and a DB-1820 Daughterboard.

M-7018Z-G/S2 CR 10-channel Thermocouple Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) Includes an M-7018Z Module, a DN-1822 Daughterboard and a CD-2518D 1.8 m Cable.

Gọi 0904251826 để được trợ giúp

Module 10 kênh đầu vào tương tự kết nối RS-485 Modbus RTU & DCON ICP DAS M-7018Z

Features

  • 10-channel Analog Input

  • Temperature Output Consistency

  • Stable Temperature Output in the Field

  • Current, Voltage and Thermocouple Input

  • Overvoltage Protection of up to 240 Vrms

  • Individual Channel Configuration

  • Open Thermocouple Detection

  • 4 kV ESD Protection

  • 3000 VDC Intra-module Isolation

  • Dual Watchdog

  • Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-7018Z/M-7018Z is a 10-channel universal Analog Input module with an RS-485 interface that is especially designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. The innovative design of the enhanced model ensures that thermocouple measurement is more accurate than with the earlier design. Besides the thermocouple inputs, the I-7018Z/M-7018Z also supports voltage and current input. The voltage input range can be from +/-15 mV to +/-2.5 V. Up to 10 different types of Analog Input can be connected to a single module. Overvoltage protection of up to 240 Vrms is provided. The module also features per-channel open wire detection for the thermocouple and +4 ~ +20 mA input channels. The M-7018Z provides additional support for both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7018Z.

Application

  • Building Automation

  • Factory Automation

  • Machine Automation

  • Remote Maintenance

  • Remote Diagnosis

  • Testing Equipment

I/O Specification

Models

I-7018Z

M-7018Z

Analog Input

Channels

10

Wiring

Differential

Sensor Types

Thermocouple

J, K, T, E, R, S, B, N, C, L, M, LDIN43710

Voltage

±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V

Current

±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (requires an optional external 125 Ω resistor)

Resolution

16-bit

Accuracy

±0.1% of FSR

Sampling Rate

10 Hz (Total)

Input Impedance

> 400 kΩ

Common Voltage Protection

±200 VDC

Individual Channel Configuration

Yes

Overvoltage Protection

240 Vrms

Open Wire Detection
(for thermocouple only)

Yes

Temperature Output Consistency

Yes

Stable Temperature Output in the Field

Yes

System Specification

Models

I-7018Z

M-7018Z

Communication

Interface

RS-485

Bias Resistor

No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)

Format

(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)

Baud Rate

1200 to 115200 bps

Protocol

DCON

Modbus RTU, DCON

Dual Watchdog

Yes, Module (1.6 Seconds), Communication (Programmable)

LED Indicator/Display

System LED Indicator

Yes, 1 as Power/Communication Indicator

I/O LED Indicator

-

7-Segment LED Display

-

Isolation

Intra-Module Isolation, Field-to-Logic

3000 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for each Terminal

EFT (IEC 61000-4-4)

±4 kV to Power

Surge (IEC 61000-4-5)

±0.5 kV for Power Line

Power

Reverse Polarity Protection

Yes

Input Range

+10 ~ +30 VDC

Consumption

1.0 W

Mechanical

Dimensions (L x W x H)

M-7018Z

116 mm x 73 mm x 35 mm

DB-1820

78 mm x 65 mm x 22 mm

DN-1822

103 mm x 96 mm x 27 mm

Installation

DIN-Rail or Wall Mounting

Environment

Operating Temperature

-25 to +75°C

Storage Temperature

-40 to +85°C

Humidity

10 to 95% RH, Non-condensing

Download

Manual

Data sheet

Software

Addressing Map

FAQ

Certification

Odering information

I-7018Z-G/S CR

10-channel Thermocouple Input Module using the DCON Protocol (Gray Cover) (RoHS)
Includes an I-7018Z Module and a DB-1820 Daughterboard.

I-7018Z-G/S2 CR

10-channel Thermocouple Input Module using the DCON Protocol (Gray Cover) (RoHS)
Includes an I-7018Z Module, a DN-1822 Daughterboard and a CD-2518D 1.8 m Cable.

M-7018Z-G/S CR

10-channel Thermocouple Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
Includes an M-7018Z Module and a DB-1820 Daughterboard.

M-7018Z-G/S2 CR

10-channel Thermocouple Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
Includes an M-7018Z Module, a DN-1822 Daughterboard and a CD-2518D 1.8 m Cable.

I-7018Z-G/S = I-7018Z + DB-1820
(The DB-1820 connects directly to the I-7018Z)
M-7018Z-G/S = M-7018Z + DB-1820
(The DB-1820 connects directly to the M-7018Z)

I-7018Z-G/S2 = I-7018Z + DN-1822
(The DN-1822 connects directly to the I-7018Z)
M-7018Z-G/S2 = M-7018Z + DN-1822
(The DN-1822 connects directly to the M-7018Z)

Suggest Accessories

CD-2518D CR

25F-25M 1.8 m Cable with DIN-Rail Mount for the DB-1820 (RoHS)

CD-25015 CR

25F-25M 15 cm Cable with DIN-Rail Mount for the DB-1820 (RoHS)

4PAPP-006-G CR

Plastic Rack (RoHS)

CD-25015
15 cm Cable + DB-1820

4PAPP-006-G

I-7018Z-G/S + CD-25015 + 4PAPP-006-G
M-7018Z-G/S + CD-25015 + 4PAPP-006-G

CD-2518D
1.8 m Cable + DB-1820

I-7018Z-G/S + CD-2518D
M-7018Z-G/S + CD-2518D

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: