Module 10/20 kênh đầu vào tương tự kết nối RS-485 Modbus RTU & DCON ICP DAS M-7017Z

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7017Z-G CR 10/20-channel Analog Input Module with High Voltage Protection using the DCON Protocol (Gray Cover) (RoHS)

M-7017Z-G CR 10/20-channel Analog Input Module with High Voltage Protection using the DCON and Modbus Protocols (Gray Cover) (RoHS)

Gọi 0904251826 để được trợ giúp

Module 10/20 kênh đầu vào tương tự kết nối RS-485 Modbus RTU & DCON ICP DAS M-7017Z

Features

  • 10-channel Differential or 20-channel Single-ended inputs

  • Jumper Selectable Voltage or Current Input

  • 240 Vrms Overvoltage Protection

  • Supports Fast and Normal Mode Sampling

  • 4 kV ESD and EFT Protection

  • 3000 VDC Intra-module Isolation

  • Overcurrent Protection

  • Individual Channel Configuration

  • Dual Watchdog

  • Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-7017Z is an Analog Input module that includes 10 differential or 20 single-ended Analog Input channels. The module provides a programmable input range on all Analog Input channels. Each Analog Input channel can be configured for an individual input range, providing a high overvoltage protection of 240 Vrms and 50mA overcurrent protection at 110 VDC/VAC. Voltage and current input is jumper selectable. The sampling rate of the I-7017Z is adjustable can be set to either fast or normal mode. The module also features per-channel open wire detection for 4 ~ 20 mA input and provides 4 KV ESD protection as well as 3000 VDC intra-module isolation. The M-7017Z supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7017Z.

Application

 

  • Building Automation

  • Factory Automation

  • Machine Automation

  • Remote Maintenance

  • Remote Diagnosis

  • Testing Equipment

I/O Specification

Models

I-7017Z

M-7017Z

Analog Input

Channels

10/20

Wiring

10 Differential or 20 Single-ended (Software Selectable - see Note 1)

Sensor Types

Voltage

±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V

Current

±20 mA , 0 ~ +20 mA, +4 ~ +20 mA (Jumper Selectable)

Resolution

16-bit

Accuracy

Normal Mode

±0.1% of FSR

Fast Mode

±0.5% of FSR

Sampling Rate

Normal Mode

10 Hz

Fast Mode

60 Hz

Input Impedance

Voltage

2 MΩ (Differential)

1 MΩ (Single-ended)

Current

125 Ω (Differential)

Common Voltage Protection

±200 VDC

Individual Channel Configuration

Yes

Overvoltage Protection

240 Vrms

Overcurrent Protection

Yes, 50 mA at 110 VDC

Temperature Output Consistency

Yes, 400 VDC

Open Wire Detection for +4 ~ +20 mA

Yes

Note 1: Differential wiring can be used for both voltage input and current input.
Single-ended wiring can only be used for voltage input

System Specification

Models

I-7017Z

M-7017Z

Communication

Interface

RS-485

Bias Resistor

No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)

Format

N, 8, 1

Baud Rate

1200 to 115200 bps

Protocol

DCON

Modbus RTU, DCON

Dual Watchdog

Yes, Module (1.6 Seconds), Communication (Programmable)

LED Indicator/Display

System LED Indicator

Yes, 1 as Power/Communication Indicator

I/O LED Indicator

-

7-Segment LED Display

-

Isolation

Intra-Module Isolation, Field-to-Logic

3000 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for each Terminal

EFT (IEC 61000-4-4)

±4 kV for Power Line

Surge (IEC 61000-4-5)

±0.5 kV for Power Line

Power

Reverse Polarity Protection

Yes

Input Range

+10 ~ +30 VDC

Consumption

2.0 W

Mechanical

Dimensions (L x W x H)

123 mm x 72 mm x 35 mm

Installation

DIN-Rail or Wall Mounting

Environment

Operating Temperature

-25 to +75°C

Storage Temperature

-40 to +85°C

Humidity

10 to 95% RH, Non-condensing

Download

Manual

Data sheet

Software

Addressing Map

FAQ

Certification

Odering information

I-7017Z-G CR

10/20-channel Analog Input Module with High Voltage Protection using the DCON Protocol (Gray Cover) (RoHS)

M-7017Z-G CR

10/20-channel Analog Input Module with High Voltage Protection using the DCON and Modbus Protocols (Gray Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: