Module hồng ngoại điều khiển 10 Relay ICP DAS IR-310-RM

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

IR-310-RM CR IR Controlled 10-channel High Power Relay Module (RoHS)

Gọi 0904251826 để được trợ giúp

Module hồng ngoại điều khiển 10 Relay ICP DAS IR-310-RM

IR-310-RM is a 10-channel high power relay module designed for the power control of various appliances. The relay module can switch up to 10 A loads. There are NO/NC switches and protection circuit for each channel. The relays can be controlled independently or sequentially by serial communication with Modbus RTU protocol, as well as by wireless IR remote control. There are also maximum 5 interlocked relay pairs for interlocked switching. The application field can be manual/automatic power switch, light scenario control and energy conservation etc.


  • e-Classroom service

  • Lighting Scenario Control

  • Home and Building Automation


  • 10 channels high power relays: 10A x 4, 5A x 6

  • Supports IR commands (custom:64, built-in:32) for relay control.

  • NO & NC terminals for each channel

  • Protection circuit for each channel
  • Sequential relay control

  • Supports maximum 5 sets of interlocked relay pairs (e.g. CW/CCW motor control)

  • Power-on values and power failure memory

  • RS-232 and RS-485 serial interface

  • Supports Modbus/RTU protocol (Slave)

  • Modbus Network IDs: 1 ~ 15 (HW); 1 ~ 247 (SW)


IR utility (contains IR-310-RM utility) is the configuration tool for IR-310-RM.

  • Can get/set separate or all settings from/to IR-310-RM.

  • For relay test and relay states indication.

  • Control IR-310-RM to emit IR commands for the IR learning remote.


Relay Output

Number of Outputs


Relay Types

Form C relay SPDT

Contact Rating

5A @220VAC for RL0, RL1 & RL6~RL9 
10A @220VAC for RL2 ~ RL5
(Operating temperature: 25°C) 

Operating Time(Max.)

10 ms for RL0,RL1 & RL6 ~ RL9, 
15 ms for RL2 ~ RL5

Release Time(Max.)

5 ms for RL0, RL1 & RL6 ~ RL9
10 ms for RL2 ~ RL5

Dielectric Strength

Open Contact

750VAC for RL0, RL1 & RL6 ~ RL9
1000VAC for RL2 ~ RL5

Contact & Coil

1500VAC for RL0, RL1 & RL6 ~ RL9
2500VAC for RL2 ~ RL5

Insulation Resistance

100 M Ohm min. at 500 VDC for RL0, RL1 & RL6 ~ RL9
1000M Ohm min. at 500VDC for RL2 ~ RL5

Life TIme

Mechanical : 1 × 10^7 OPS
Electrical : 1 × 10^5 OPS

Serial Interface

COM1 RS-232 (TxD, RxD, GND)
COM2 RS-485 (DATA+, DATA-)


Parity: None, Databits: 8, Stopbits: 1

Baud Rate

9600 ~ 115200 bps

Protocol Modbus/RTU (Slave)

Modbus Net ID

Hardware: 1 ~ 15; Software: 1 ~ 247

IR interface

IR input

On-board IR receiver

3.5 mm audio jack (for CA-IR-001)
IR Remote Commands

64 IR commands (#0 ~ #63) corresponding to self-defined relay states.
32 IR commands (#192 ~ #223) corresponding to built-in relay states.

LED Display

1 LED as power indication

10 LEDs as relay output indicators


Power Supply

+ 12 VDC

Power Consumption

6.5W (max)


Dimensions(W x H x L)

220 mm x 48 mm x 113 mm


Operating Temperature

-25 to +75°C

Storage Temperature

-30 to +80°C


10 to 90%, non-condensing





Data sheet

Wire Connection

Odering information

IR-310-RM CR

IR Controlled 10-channel High Power Relay Module (RoHS)



IR receiver cable, 3 m

CA-IR-SH2251-5 Single-headed IR emitter cable (with adhesive pad, Ø 5 mm IRED, 2.5 m)


Semi-sphere-headed IR receiver cable (with adhesive pad, 2.5 m)

FRA05-S12-SU 12 V/0.58 A (max) Power Supply


DC connector to 2-wire power cable, 0.3 M

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: