Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit PoE Ethernet + 1 cổng SFP Oring IPMC-111PB

Thương hiệu: Oring | Tình trạng: Còn hàng
Liên hệ

Industrial mini type Ethernet to fiber PoE media converter with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket

Gọi 0904251826 để được trợ giúp

Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit PoE Ethernet + 1 cổng SFP Oring IPMC-111PB

Introduction

Overview

IPMC-111PB is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPMC-111PB has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB with wide operating temperature range from -40°C~70°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

IPMC-111PB also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB is reliable media converter with PoE capability and can satisfy most demand of operating environment

Features

  • Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X

  • Supports Ethernet to fiber with SFP socket

  • Support LFP (Link Fault Pass-through) function

  • Supports full/half duplex operation mode

  • P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts

  • Supports store and forward transmission

  • Provided DIP-Switch to set operation mode

  • High reliability and rigid IP-30 housing

  • DIN-Rail and panel mounting enabled

Specification

Specifications

ORing Media Converter Model

IPMC-111PB

Physical Ports

 

10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX

1

Technology

 

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)

Processing

Store-and-Forward

DIP-Switch setting

DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

LED Indicators

 

Power indicator

Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line

10/100Base-T(X) RJ45 port indicator

Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

100Base-FX fiber port indicator

Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

LFP statue indicator

Amber LED – (ON) LFP function fail / (OFF) LFP function disable

PoE indicator

Amber for P.S.E. indicator

Power

 

Input power

Dual 50~57 VDC voltage power inputs at 4-pin terminal block

Power consumption (Typ.)

31.2 Watts (P.S.E. output included)

Overload current protection

Present

Reverse polarity protection

Present

Physical Characteristic

 

Enclosure

IP-30

Dimension (W x D x H)

26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)

Weight (g)

210 g

Environmental

 

Storage Temperature

-40 to 85°C(-40 to 185°F)

Operating Temperature

-40 to 70°C (-40 to 158°F)

Operating Humidity

5% to 95% Non-condensing

Regulatory approvals

 

EMI

FCC Part 15, CISPR (EN55022) class A

EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock

IEC60068-2-27

Free Fall

IEC60068-2-32

Vibration

IEC60068-2-6

Safety

EN60950-1

Warranty

5 years

Order information

Model Name

Description

IPMC-111PB

Industrial mini type Ethernet to fiber PoE media converter with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket

Download

Datasheet

Preview

Version

Release date

Size

 

Datasheet_IPMC-111PB.pdf

No

V1.1

Apr 21, 2016

1.26MB

 

QIG

Preview

Version

Release date

Size

 

QIG_IPMC-111PB.pdf

No

V1.0

Apr 21, 2016

664.42KB

 

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: