iP-8847 8 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ
Highlight Information
● 80186, 80 MHz CPU
● MiniOS7 Inside
● Development Software: ISaGRAF Ver.3
● 512 KB Battery Backup SRAM to Retain Data
● 64-bit Hardware Serial Number
Gọi 0904251826 để được trợ giúp

iP-8847 8 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000

 

   

 

Models iP-8417 iP-8817 iP-8447 iP-8847
System Software
OS MiniOS7 (DOS-like embedded operating system)
Development Software
ISaGRAF Software ISaGRAF Ver. 3 IEC 61131-3 standard
Languages LD, ST, FBD, SFC, IL & FC
Max. Code Size 64 KB
Scan Time 2 ~ 25 ms  for normal program
10 ~ 125 ms  (or more) for complex or large program
CPU Module
CPU 80186, 80 MHz
SRAM 512 KB 768 KB
Flash 512 KB; with Write Protect Switch
microSD Expansion Yes (but ISaGRAF doesn't support)
Dual Battery Backup SRAM 512 KB; data valid up to 5 years (for retain variables)
EEPROM 16 KB
NVRAM 31 bytes (battery backup, data valid up to 5 years)
RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
64-bit Hardware Serial Number Yes, for Software Copy Protection
Watchdog Timers Yes (0.8 second)
DIP Switch Yes (8 bits)
Communication Ports
Ethernet - RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 0 Internal communication with the high profile I-87K series modules in slots
COM 1 RS-232 (to update firmware) (RxD, TxD and GND); non-isolated
COM 2 RS-485 (Data+, Data-) with internal self-tuner ASIC; 3000 VDC isolated
COM 3 RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232, Data+ and Data- for RS-485); 
non-isolated
COM 4 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated
SMMI
LED Display Yes, 5-Digit
Programmable LED Indicators 3
Push Buttons 4
Buzzer - - Yes
I/O Expansion Slots
Slot Number 4 8 4 8
Note: For High Profile I-8K and I-87K Modules Only
Data Bus 8/16 bits
Address Bus Range 2 K for each slot
Mechanical
Dimensions (W x L x H) 231 mm x 132 mm x 111 mm: iP-8417, iP-8447
355 mm x 132 mm x 111 mm
: iP-8817, iP-8847
Installation DIN-Rail or Wall Mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH (non-condensing)
Power
Input Range +10 ~ +30 VDC
Isolation 1 kV
Redundant Power Inputs Yes, with one power relay (1 A @ 24 VDC) for alarm
Capacity 30 W 30 W 30 W 30 W
Consumption 6.7 W 7.2 W 6.7 W 7.2 W
Protocols  (Note that certain protocols require optional devices)
NET ID 8 bits DIP switch to assign NET ID as 1 ~ 255
Modbus RTU/ASCII Master A max. of 2 ports: COM1~5. (To connect to other Modbus Slave devices.) 
A max. of Modbus_xxx Function Block amount for 2 ports: 128.  
(*)
Modbus RTU Slave A max. of 2 ports: COM1 and one of COM2 ~ 3. 
(For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.)
Modbus TCP/IP Slave (For iP-8x47 only) Two Ethernet ports support Modbus TCP/IP Slave Protocol for connecting ISaGRAF & PC/HMI up to 6 connections. 
User-defined Protocol Custom protocols can be applied at COM1~20 using Serial communication function blocks.  (*)
Remote I/O One of COM2 ~ 4 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 64 I-7000/87K remote I/O modules can connect to one PAC.
Fbus Built-in COM3 Port to exchange data between ICP DAS’s ISaGRAF PACs.
Ebus (LAN2: upper port of iP-8x47 ONLY)
Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port.
Send Email (For iP-8x47 only)
Provide functions to send email to a max. of 10 receivers with a single attached file via the Ethernet port through internet. The max. of file size is about 488 KB.
SMS: Short Message Service One of COM4 ~ 5 can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone. (*)
Optional GSM Modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)
Modem Link COM4 can connect a general Modem. Supports PC to remotely download & monitor the controller.
MMICON/LCD One of COM3 or COM4 supports ICP DAS’s MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float.
Redundant Bus7000 Two ISaGRAF PACs can link to remote I-7000 & I-87K High profile I/O modules at the same time. 
Only one controller is active to control these Remote I/Os. If one is dead, the other one will take over the control of Remote I/Os.
CAN/CANopen COM1 or COM3 ~ 12 can connect to one I-7530 (converter: RS-232 to CAN) to support CAN/CANopen devices and sensors. One iP-8xx7 supports a max. of 3 RS-232 ports to connect a max. of 3 I-7530. (*) (FAQ-086)  
FRnet I/O Enable a max. of 4 pcs. I-8172W boards to be used to connect to FRnet I/O modules, such as FR-2053, FR-2057, FR-32R, FR-32P. (Max. 1024-ch. DI + 1024-ch. DO) (FAQ-082, 154)
FTP Client Enable the FTP Client to upload files from the PAC to a remote FTP server on a PC. (FAQ-151)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: