Bộ phát Wi-Fi công nghiệp Access Point 2 cổng Ethernet Oring IAP-420_EU

Thương hiệu: Oring | Tình trạng: Còn hàng
Liên hệ

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)

Gọi 0904251826 để được trợ giúp

Bộ phát Wi-Fi công nghiệp Access Point 2 cổng Ethernet Oring IAP-420_EU

Introduction

Overview

IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN.  It supports 802.1X and MAC filters for security control.   It can be configured to operate in AP/Bridge/Repeater/AP-Client mode.  You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface.  In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification.  Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.

Features

  • High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed

  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported

  • Support X-Roaming < 100 ms

  • Support AP/Client/Bridge/AP-Client Mode

  • Secured Management by HTTPs

  • Wireless connecting status monitoring

  • Event Warning by Syslog, Email, SNMP Trap

  • 1KV isolation for PoE P.D. port of IAP-420+

  • Rigid IP-30 housing design

  • DIN-Rail and Wall-mount enabled

Specification

Specifications

ORing Switch Model

IAP-420

IAP-420+

Physical Ports

 

10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX

2

PoE P.D. Port

-

Present at ETH
Fully compliant with IEEE 802.3af Power Device specification
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min

WLAN Interface

 

Operating Mode

AP/Client/Bridge/AP-Client

Antenna and Connector

1 x External reverse SMA-type antenna connector

Radio Frequency Type

DSSS, OFDM

Modulation

IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM

Frequency Band

America / FCC:
2.412~2.462 GHz (11 channels )
Europe CE / ETSI:
2.412~2.472 GHz ( 13 channels )

Transmission Rate

802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/18/24/36/48/54 Mbps
802.11n(40MHz): UP to 150 Mbps

Transmit Power

802.11b: 19dBm ±1.5dBm
802.11g: 17dBm ±1.5dBm
802.11n(2.4G@20MHz): 16.5dBm ±1.5dBm
802.11n(2.4G@40MHz): 14.5dBm ±1.5dBm

Receiver Sensitivity

802.11b: -90dBm ±2dBm@1Mbps
802.11g: -72dBm ±2dBm@54Mbps
802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm

Encryption Security

WEP: (64-bit, 128-bit key supported)
WPA/WPA2:802.11i (WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption

Wireless Security

SSID broadcast disable and enable

Protocol Support

 

Protocol

ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP

LED Indicators

 

Power Indicator

LED x 3, PWR 1, 2, (PoE):
Green On: Power is on and functioning Normally.

10/100Base-T(X) RJ45 Port Indicator

LED x 2 , Green for port Link/Act at 100Mbps.

WLAN LEDs

WLAN Link /ACT: Green: Blinking

Power

 

Redundant Input Power

Dual DC inputs. 12~48VDC on 4-pin terminal block

Power Consumption (Typ.)

4 Watts

Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristics

 

Enclosure

IP-30

Dimensions (W x D x H)

41(W)x81(D)x95(H) mm

Weight (g)

292 g

297 g

Environmental

 

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-10 to 60°C(14 to 140°F)

Operating Humidity

5% to 95% Non-condensing

Regulatory Approvals

 

EMI

FCC Part 15, CISPR (EN55022) class A

EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock

IEC60068-2-27

Free Fall

IEC60068-2-31

Vibration

IEC60068-2-6

Safety

EN60950-1

Warranty

5 years

Order information

Model Name

Description

IAP-420+_EU

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)

IAP-420+_US

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)

IAP-420_EU

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)

IAP-420_US

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)

Download

Datasheet

Preview

Version

Release date

Size

 

DataSheet_IAP-420(+).pdf

No

 

May 03, 2016

286.18KB

 

Manual

Preview

Version

Release date

Size

 

User manual_IAP-420(+).pdf

No

V1.1

May 03, 2016

1.59MB

 

QIG

Preview

Version

Release date

Size

 

QIG_IAP-420 Series.pdf

No

V1.1

May 03, 2016

232.27KB

 

Firmware

Preview

Version

Release date

Size

 

FW_IAP-420+.zip

No

V1.0e

May 03, 2016

6.32MB

 

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: