I-9093 CR: Module 3 trục bộ đếm tốc độ cao Counter

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-9093 CR 3-axis High-speed Encoder Module with Compare Trigger Output (RoHS)

Gọi +84 904251826 để được trợ giúp

I-9093 CR: Module 3 trục bộ đếm tốc độ cao Counter

Features

• 3-axis, 32-bit Encoder Counter
• Maximum Counting Rate: 6 MHz
• Encoder Input: A, B, C Differential
• Encoder Mode: Quadrant, CW/CCW, PULSE/DIR
• Compare Trigger Output
• Selectable Reset/Latch Signal Inputs
• 4 kV ESD Protection
• Wide Operating Temperature Range: -25 to +75°C

Introduction

I-9093 includes 3-axis encoder with compare trigger output function. It can generate a periodic trigger signal when the motor reaches a specified position. The specified position is called a breakpoint and is similar to a switch that is triggered after the motor passes a certain position. To use the compare trigger output function, you have to set an initial point (P) and a trigger period of the following points (D). The trigger signal is an I/O line that can be used to fire another device. For example, when a motor reaches a certain position, the trigger signal can be used to fire the shutter of a camera to capture an image for the defect detection. All operations of position compare and trigger pulse output are automatically done by the hardware circuit. There is no software calculation effort when the system is operating. I-9093 makes the system design simpler, and significantly increases the system performance.

Specification

 
Isolation
Intra-module Isolation 3000 VDC

 

EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point

 

LED Indicators
Status 1 x Power and Communication
12 x Status

 

Encoder Input
Response Speed Quadrant: 2 MHz Max.
CW/CCW: 6 MHz
Pulse/Dir: 6 MHz
Resolution 32-bit
Programmable Digital Filter 1 ~ 250 μs
Photo-isolation 2500 VDC
No. of Axes 3
Mode Quadrant , CW/CCW , Pulse/Dir
Input Level ON Voltage Level: +3.5 VDC ~ +5 VDC Or 10 VDC ~ 24 VDC (Jumper Select)
OFF Voltage Level: +0.8 VDC Max.

 

Compare Trigger Output
Channels 3
Load Voltage 5 ~ 48 V
Max. Load Current 100 mA
Trigger Pulse Width 10 μs ~ 128 μs

 

External Latch Input
Channels 3
Input Level ON Voltage Level: +3.5 VDC ~ +5 VDC or +10 VDC ~ +24 VDC (Jumper Select)
OFF Voltage Level: +0.8 VDC Max.

 

Power
Consumption 2 W Max.

 

Mechanical
Dimensions (mm) 31 x 134 x 144 (W x L x H)

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-9093     CR  3-axis High-speed Encoder Module with Compare Trigger Output (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: