I-8123W-CPS 1 Port high performance CANopen slave module

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ
One CANopen slave communication port
Standard CANopen specification DS-301 v4.02
Support node id 1~127
Programmable bauds: 10k, 20k, 50k, 125k, 250k 500k, 800k, and 1M bps
Support
Gọi 0904251826 để được trợ giúp

I-8123W-CPS 1 Port high performance CANopen slave module

 


 

 

Hardware
CPU 80186, 80 MHz or compatible
SRAM/Flash/EEPROM 512 KB / 512 KB / 16 KB
NVRAM 31 bytes (battery backup, data valid for up to 10 years)
Watchdog CPU built-in
RTC(Real Time Clock) Yes
CAN Interface
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250
Channel Number 1
Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_H, N/A for others)
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M
Transmission Distance(m) Depend on baud rate (for example, max. 1000 m at 50 kbps )
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor Switch for 120Ω terminator resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Protocol CANopen CiA DS-301 v4.02
LED
Round LED PWR LED, Rx/Tx LED, ERR LED
Software
Driver WinPAC, ViewPAC, XPAC-CE6 (The XPAC series PAC only support one I-8123W-CPS)
Library eVC++ 4.0, C#.net 2005, VB.net 2005
Power
Power supply Unregulated +10 ~ +30 VDC
Protection Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption 2W
Mechanism
Dimensions 31mm x 115mm x 91mm (W x L x H)
Environment
Operating Temp. -25 ~ 75 ℃
Storage Temp. -40 ~ 80 ℃
Humidity 5 ~ 95% RH, non-condensing

 

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: