Bộ chuyển đổi PROFINET sang RS-232/422/485 ICP DAS I-7580

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7580 CR PROFINET to RS-232/422/485 Converter (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ chuyển đổi PROFINET sang RS-232/422/485 ICP DAS I-7580

The I-7580 is a PROFINET IO device with RT functionality that supports RS-232, RS-422 and RS-485 serial interfaces. Users can choose one of these serial communication interfaces to apply. It is easy to allow users to take almost serial device to a PROFINET network including serial remote I/O devices, sensors, actuators, HMI, barcode readers and RFID, etc.

Features

  • Protocol: PROFINET IO Device

  • PROFINET Conformance Class B and RT Class 1

  • Cyclic Time: 1ms (min)

  • Generic GSDML File Provided (Version 2.25)

  • Max length of input/output data is 512/384 Bytes

  • Provide LED indicators

  • 4 kV Contact ESD protection for any terminal

  • Wide range of power input (+10 to +30 VDC) and operating temperature (-25 to 75°C)

Utility

ICP DAS provides the PFN_Tool configuration utility to configure devices.

  • Provide device search function

  • Show firmware version

  • Support network parameters configuration

  • Show diagnostic messages of the I-7580

  • Provide comport test function

  • Provide Communication Log of comport

Hardware Specifications

Hardware

CPU

32-bit CPU Core

RAM/Flash/EEPROM

32 MB / 4 MB / 8 KB

Watchdog

CPU built-in

ESD Protection

4 kV class A

PROFINET Interface

Protocol

PROFINET IO Device

Conformance Classes

Class B

Services

RTC, RTA, CL-RPC, DCP, LLDP, I&M

Cycle Time

1 ms (min)

Ethernet Interface

Controller

10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)

Connector

RJ-45 x 2 (LED indicators) , Integrated 2-Port Switch

Services

ICMP, IGMP, ARP, DHCP, TELNET, TFTP, SNMP, VLAN Priority Tagging

UART Interface

COM

RS-232/RS-422/RS-485 (can't be used simultaneously)

COM Connector

3-pin screwed terminal block (RxD, TxD, GND) 
4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-)
2-pin screwed terminal block (DATA+, DATA-)

Baud Rate (bps)

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800

Data bit

7, 8

Stop bit

1

Parity

None, Even, Odd

LED

Round LED

AP LED, BOOT LED, ERR LED

Power

Power supply

Unregulated +10 ~ +30 VDC

Protection

Power reverse polarity protection, Over-voltage brown-out protection

Power Consumption

3.4 W

Mechanism

Installation

DIN-Rail

Dimensions

42 mm x 76 mm x 119 mm (W x L x H)

Environment

Operating Temp.

-25 ~ 75 ℃

Storage Temp.

-30 ~ 80 ℃

Humidity

10 ~ 90% RH, non-condensing

Download

Pin

Software

GSD

Manual

Data sheet

Certification

FAQ

Odering information

I-7580 CR

PROFINET to RS-232/422/485 Converter (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: