I-7565-G CR: Bộ chuyển đổi USB sang CAN BUS

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7565-G CR Intelligent USB to CAN converter (Plastic Case) (RoHS) Includes CA-USB18(1.8M Cable).

Gọi +84 904251826 để được trợ giúp

I-7565-G CR: Bộ chuyển đổi USB sang CAN BUS

Features

  • RoHs Design
  • Fully compliant with USB 1.1/2.0(Full Speed)
  • Fully compatible with the ISO 11898-2 standard
  • No external power supply is required as I-7565 takes it's power from the USB bus
  • 82C250 CAN transceiver
  • Transmission speed up to 1M bps for CAN and 921.6K bps for USB
  • Support both CAN 2.0A and CAN 2.0B
  • Built-in jumper to select 120 ohm terminal resister
  • Power, data flow and error indicator for CAN and USB
  • 1000 frames in CAN received buffer
  • Watchdog inside
  • Windows 98/ME/2000/XP/Vista/Win 7/Win 10 and Linux drivers support
  • Supports a range of baud rates from 10 kbps ~ 1 Mbps
  • Able to configure the CAN baud rate for each channel using a rotary switch
  • Extends the CAN transmission distance

Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7565.

Introduction

CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface by the MS-Windows 98, Me, 2000, XP, Win 7 and Win 10 operating systems. If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).
The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface.

Application

• Factory Automation
• Building Automation
• Home Automation
• Control System
• Monitor System
• Vehicle Automation

Specifications

LED Indicators
Status 1 x Power
1 x CAN status

 

USB
Specification USB 1.1 and 2.0 standard
Connector 1 x USB (Type B)
Driver Windows 2000/XP//7
Receive Buffer 900 data frames

 

CAN
Transceiver 82C250/TJA1042
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 3000 Vrms on the CAN side
Terminal Resistor Selectable 120 Ω terminal resistor by jumper
Specification CAN 2.0A/2.0B
Filter Yes
Receive Buffer 1000 data frames

 

Power
Input Range USB power delivery
Consumption 1.5 W

 

Mechanical
Casing Plastic
Dimensions (mm) 72 x 112 x 33 (W x L x H)
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Odering informations

I-7565-G     CR  Intelligent USB to CAN converter (Plastic Case) (RoHS)
Includes CA-USB18(1.8M Cable).

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: