Bộ chuyển đổi USB sang CANopen Master ICP DAS I-7565-CPM

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

USB to CANopen Master Converter. Supports operating temperatures between -25 to 75°C.

Gọi 0904251826 để được trợ giúp

Bộ chuyển đổi USB sang CANopen Master ICP DAS I-7565-CPM

Features

The I-7565-CPM. It's a standard CANopen protocol and has a built-in cpu of 80186 80MHz to run the I-7565-CPM firmware independently. I-7565-CPM provides a set of APIs that will sllow the user to easily control and program the device. It will also solve the complexity of protocols for the user. It can communicate between a computer and the I-7565-CPM's USB interface to remotely control the device quickly and easily, due to the I-7565-CPM's USB interface. It can create a CANopen system effectively.

Applications

  • Industrial Machinery

  • Laboratory Equipment & Research

  • Restaurant Appliances

  • Maritime

  • Medical

  • Specialty Vehicles...etc. 

Features

  • Follows CiA DS-301 V4.02 and DSP-401 v2.1

  • Support maximum nodes up to 10

  • Support 8 kinds baud: 10Kbps, 20Kbps, 50Kbps, 125Kbps, 250Kbps, 500Kbps, 800Kbps, and 1Mbps

  • Support Node Guarding protocol

  • Support NMT, PDO, SDO, SYNC and EMCY protocol

  • Fully compliant with USB 1.1/2.0 (Full Speed)

  • Supports Auto-Seach slave device functions.

  • Supports on-line adding and removing devices

  • Free software development tools for windows

  • Four indication LEDs (Pwr, Tx/Rx, Act and Err LEDs)

  • Provides demos and utilites

  • Supports all transmission types

  • Provide VC++ function libraries to process CANopen message

Software Utility Features

With the free GUI tool, I-7565-CPM utillity, users can manage and integrate a CANopen slave device easily, so when you are planning or developing CANopen network applications, I-7565-CPM utility could help you to scan devices within the network and check the connection status of each device on the remote site.

  • Support Auto_Scan slave nodes

  • Refresh PDO data automatically

  • Provide interface to assecss PDO and SDO objects

  • Add and remove PDO Dynamically

  • Change NMT mode for one slave or all slaves on the same net work

  • Configure EMCY COBID, SYNC COBID, Guarding parameters and transmission type of PDO

  • Supports pollling methods of PDOs and SDOs

  • Online remove node

Specifications

Hardware

CPU

80186, 80MHz.

SRAM/Flash/EEPROM

512KB / 512KB /16KB

ESD Protection

2 kV class A and 3 kV class B

CAN Interface

Controller

Phillips SJA1000T CAN Controller

Transceiver

Phillips 82C250 CAN Transceiver

Interface

ISO/IS 11898-2, 9-pin male D-Sub(GAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+, N/A for others)

Transfer Rate

Support 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps

Specific

Follow CiA DS-301 V4.02 and support CiA DSP-401 V2.1

Slave number

support maximum nodes up to 10

USB Interface

Connector

USB Type B

Transmission speed

921.6 kbps

LED

Round LED

PWR LED, ACT LED, ERR LED, Tx/Rx LED.

Software

Driver

Windows 98/ME/NT/2K/XP.

Library

VC++6.0

Power

Power supply

By USB interface.

Mechanism

Dimensions

72mm x 101mm x 33mm (W x L x H)

Reference & Support

 

 

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: