Bộ chuyển đổi Ethernet sang HART ICP DAS I-7547

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7547 CR Ethernet To HART Converter (Gray Cover) (RoHS)

Gọi 0904251826 để được trợ giúp

Bộ chuyển đổi Ethernet sang HART ICP DAS I-7547

I-7547 is an Ethernet to HART converter specially designed as the master device of HART protocol. When connecting I-7547 to PC via Ethernet and install the VxComm utility, it will allow users to access the HART devices via virtual COM-port of PC. Therefore, users can make data collection and processing of HART network easier and quicker by applying I-7547. In addition, we also provide the free HC_Tool utility for module configuration and HART communication test easily.


  • Current Measuring

  • Petrochemical Industry Application

  • Environment Monitoring

  • Tunnel Monitoring

  • Monitor system

  • Building Monitoring

FDT (Field Device Tool) standardizes the communication and configuration interface between all field devices and host systems. FDT provides a common environment for accessing the devices' most sophisticated features. Therefore, by using ICPDAS HART converters, I-7567, I-7570 or I-7547, supporting FDT, users can easily and quickly construct HART online control and configuration system.

HART Device Simulator (called HDS) is the HART device simulation software developed by ICP DAS. It can be used to simulate multi HART slave devices simultaneously to exchange data with HART master device by using ICP DAS HART converter (like: I-7567 / I-7570 / I-7547) connected to any COM port (USB / 232 / 485 / Ethernet). By this way, users can develop or verify the HART master program without any HART slave device.

HDS (HART Device Simulator) : http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus/hart/converter/hds.html


  • Support HART Short/Long frame
  • Support HART Burst mode
  • Support point-to-point or multi-drop HART mode
  • Support connecting up to 15 HART slave devices
  • Allow two HART masters
  • Provide HC_Tool utility for module configuration and HART communication
  • Support firmware update via Ethernet
  • Provide PWR / TxRx indication LED
  • 4KV ESD Protection
  • Built-in Watchdog
  • Selectable 250Ω load resistor
  • Provide four HART channels
  • Support VxComm technique
  • Built-In Web Server for network setting
  • Support HART Pair-Connection (FW_v1.03)
  • Support FDT (Field Device Tool) technique and the below FDT software have been tested OK

(1) PACTware (PACTware)
(Free download: http://www.pactware.com/en/products/pactware.html)

(2) FieldCare (Endress+Hauser)
(Download: http://portal.endress.com/wa010/FieldCareDownloadGui/) 

(3) PDM (Seimens)
(Download: http://support.automation.siemens.com/cn/llisapi.dll?


  • Search all HART devices automatically
  • Provide HART Universal & Common-Practice command (v6.0) for HART device configuration
  • Provide module configuration and HART communication easily and quickly
  • Provide data logging for HART communication

Hardware Specification

Ethernet Interface
Ethernet Port 10/100 Base-TX with Auto MDI/MDI-X
Virtual COM Yes (VxComm Utility)
Built-In Web Server Yes
HART Interface
Channel 4
Connector 2-pin screwed terminal block for each HART port
Terminator Resistor Selectable 250 Ω terminal resistor for each HART port
4KV ESD Protection Yes, Contact for each terminal
Isolation Voltage 500 VDC
LED Display PWR : Power Indicator 
TxRx : Data Received from Ethernet / HART Indicator
Power supply Unregulated +10 ~ +30 VDC
Protection Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption Maximum : 1.5W
Installation DIN-Rail or Wall Mounting
Dimensions 123 mm x 72 mm x 35 mm (H x W x D)
Operating Temp. -25 ℃ ~ +75 ℃ (-13 to 167 ℉)
Storage Temp. -30 ℃ ~ +80 ℃ (-22 to 176 ℉)
Humidity 5% ~ 95% RH, non-condensing









Odering information

I-7547 CR

Ethernet To HART Converter (Gray Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: