I-7231D-G CR: Bộ chuyển đổi Gateway CANopen Slave sang DCON Master

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7231D-G CR CANopen Slave / DCON Master Gateway (RoHS)

Gọi +84 904251826 để được trợ giúp

I-7231D-G CR: Bộ chuyển đổi Gateway CANopen Slave sang DCON Master

Features

• NMT: Slave
• Error Control: Node Guarding and Heartbeat Producer protocol
• Node ID: Setting by CAN_GW utility
• PDO Modes: Event-triggered, remotely requested, cyclic and acyclic SYNC
• PDO Mapping: variable
• No of SDOs: 1 server, 0 client
• Emergency Message: Yes
• CANopen Version: DS-301 v4.02
• Device Profile: DSP-401 v2.1
• CAN Baud Rate setting by utility: 10K, 20K, 50K, 125K, 250K, 500K, 800K, 1M bps
• DCON Baud Rate setting by utility: 115200 bps Max
• RUN, ERR and OVERRUN LED indicators
• Support max 15 I-7000/I-87K I/O series modules
• Provide friendly Utility to configure
• 7-segmemt LED to show Node ID, CAN baud rate and RS-485 baud rate

Introduction

DCON protocol is a kind of application protocol based on the RS-485 network. It is special for ICPDAS DCON I/O modules, such as I-7000 series and I-87K series modules. By way of using I-7231D to convert the electric signals and messages, the DCON I/O modules can be upgraded to the CANopen protocol based on the CAN bus. For CANopen protocol application, the I-7231D is a CANopen slave device. So, it can produce or consume the PDO messages, receive the SDO message with proper responses, and deal with the NMT messages from NMT master. For DCON protocol application, it is a DCON master device, and it will collect all of the I/O situations of the I-7000 and I-87K series modules connected with the RS-485 port of I-7231D. Therefore, If the I-7231D receive the command form CAN bus, it does the corresponding reactions for DCON I/O channels. In addition, we also provide the utility tool for users to configure the device parameters and build EDS file for the CANopen slave device. Therefore, users can easily apply I-7k and I-87K IO modules in any CANopen master interface via the EDS file.

Applications

• Industrial Machinery
• Building Automation
• Maritime
• Restaurant Appliances
• Distributed data acquisition

Specifications

CPU Module
Watchdog Timer Hardware watchdog

 

LED Indicators
Status MS LED, NS LED, IO LED

 

COM Ports
Ports 1 x RS-232/485, Non-isolated
Baud Rate 1200 ~ 115200 bps
Protocol DCON Master

 

CANopen
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250
Ports 1
Baud Rate 10 k ~ 1 M
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Built-in 120Ω
Porotocol CiA 301 v4.02
Node ID 1 ~ 255
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes

 

Power
Consumption 3W

 

Mechanical
Dimensions (mm) 72 x 122 x 33 (W x H x D)

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-7231D-G     CR  CANopen Slave / DCON Master Gateway (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: