Module 4 kênh đầu ra tương tự 14-bit kết nối RS-485 DCON ICP DAS I-7024

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7024 CR 4-channel Analog Output Module with DCON Protocol (Blue Cover) (RoHS)

I-7024-G CR 4-channel Analog Output Module with DCON Protocol (Gray Cover) (RoHS)

Gọi 0904251826 để được trợ giúp

Module 4 kênh đầu ra tương tự 14-bit kết nối RS-485 DCON ICP DAS I-7024

Features

  • I-7024 / M-7024 / M-7024L

    • 4-channel Analog Output

  • I-7024R / M-7024R

    • 4-channel Analog Output and 5-channel Digital Input

  • Software Selectable Current or Voltage Output

  • Power-on Value Setting

  • Safe Value Setting

  • 3000 VDC Intra-module Isolation

  • Programmable Output Slope

  • Dual Watchdog

  • Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-7024 is a 14-bit 4-channel analog output module that provides current and voltage outputs. There are options for power-on values and safe values. It features 3000 VDC intra-module isolation.
The I-7024R is the same as the I-7024 and provides additional 5-channel digital inputs and 4 KV ESD protection on each terminal.
The M-7024/M-7024R support Modbus RTU and DCON protocols and can be confi gured via software. Their hardware specifi cations are the same as those of the I-7024/I-7024R.

I/O Specification

Models

I-7024

M-7024

I-7024R

M-7024R

M-7024L

Analog Output

Output Channels

4

Range

Voltage

0 ~ 5 V, ±5 V, 0 ~ 10 V, ±10 V,

Current

0 ~ 20 mA, 4 ~ 20 mA

Resolution

14-bit

12-bit

Accuracy

0.1%

DA Output Response Time

10 ms

Open Wire Detection
(for current only)

-

Channel to Channel Isolation

-

Power-on Value

Yes

Safe Value

Yes

Digital Input

Channels

-

5

-

Input Type

-

Dry Contact (Source)

-

Contact Level

On Voltage Level

-

Close to GND

-

Off Voltage Level

-

Open

-

Counters

Max. Count

-

16-bit (65535)

-

Max. Input Frequency

-

50 Hz

-

Min. Pulse Width

-

10 ms

-

I/O Specification

Models

I-7024

M-7024

I-7024R

M-7024R

M-7024L

Communication

Interface

RS-485

Bias Resistor

No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)

Format

(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)

Baud Rate

1200 ~ 115200 bps

Accuracy

DCON

Modbus RTU, DCON

DCON

Modbus RTU, DCON

Dual Watchdog

Yes, Module (1.6 Seconds), Communication (Programmable)

LED Indicator/Display

System LED Indicator

Yes, 1 LED as Power/Communication Indicator

I/O LED Indicator

-

7-Segment LED Display

-

Isolation

Intra-Module Isolation, Field-to-Logic

3000 VDC

EMS Protection

ESD (IEC 61000-4-2)

±2 kV Contact for Each Terminal

±4 kV Contact for Each Terminal

±8 kV Contact for Each Terminal

EFT (IEC 61000-4-4)

-

±4 kV to Power Line

RS (IEC 61000-4-3)

-

5 V/m, 80 MHz ~ 1GHz

Power

Reverse Polarity Protection

Yes

Input Range

+10 ~ +30 VDC

Consumption

2.4 W

3.2 W

2.7 W

Mechanical

Dimensions (L x W x H)

123 mm x 72 mm x 35 mm

Installation

DIN-Rail or Wall Mounting

Environment

Operating Temperature

-25 to +75°C

Storage Temperature

-40 to +85°C

Humidity

10 to 95% RH, Non-condensing

Download

Manual

Data sheet

Software

Addressing Map

FAQ

Certification

Odering information

I-7024 CR

4-channel Analog Output Module with DCON Protocol (Blue Cover) (RoHS)

I-7024-G CR

4-channel Analog Output Module with DCON Protocol (Gray Cover) (RoHS)

I-7024R-G CR

4-channel Analog Output and 5-channel DI Module with DCON Protocol(Gray Cover) (RoHS)

M-7024-G CR

4-channel Analog Output Module with DCON and Modbus Protocol (Gray Cover) (RoHS)

M-7024R-G CR

4-channel Analog Output and 5-channel DI Module with DCON and Modbus Protocol (Gray Cover) (RoHS)

M-7024L-G CR ~ NEW ~

12-bit 4-channel Analog Output Module using the DCON and Modbus Protocol (Gray Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: