Module 1 kênh đầu vào Strain Gauge 6 dây + 1 kênh đầu vào số + 4 kênh đầu ra số kết nối RS-485 DCON ICP DAS I-7016P
Features
-
Long-distance Strain Gauge Measurement
-
High Resolution: 16-bit
-
Excitation Voltage Output : 0 ~ +10 V
-
50 Hz Event Counter (Digital Input)
-
High/Low Alarm (Digital Output)
-
3000 VDC Intra-module Isolation
-
Dual Watchdog
-
Wide Operating Temperature Range: -25 to +75°C
Introduction
The “P” version of the I-7016 module is another milestone in the development of the I-7016 series, and is a testament to excellence by the R&D team at ICP DAS. The I-7016P is specifically designed for long-distance strain gauge measurement, and provides 1 Digital Input channel as a 50 Hz event counter and 4 Digital Output channels that can act as high or low alarms. The I-7016P also features 3000 VDC intra-module isolation.
Application
-
Building Automation
-
Factory Automation
-
Machine Automation
-
Remote Maintenance
-
Remote Diagnosis
-
Testing Equipment
I/O Specificaiton
|
Models |
I-7016P |
I-7016PD |
|
Strain Gauge Input |
|
Channels |
1 |
|
Wiring |
6-wire |
|
Sensor Types |
Full-Bridge |
|
Resolution |
16-bit |
|
Accuracy |
±0.05% of FSR |
|
Sampling Rate |
10 Hz |
|
Input Impedance |
20 MΩ |
|
Individual Channel Configuration |
- |
|
Overvoltage Protection |
±5 VDC |
|
Open Wire Detection |
- |
|
Long Distance Measurement |
Yes |
|
Excitation Voltage Output |
|
Channels |
1 |
|
Range |
0 ~ +10 V |
|
Max. Load Current |
40 mA |
|
Resolution |
16-bit |
|
Accuracy |
±0.05% |
|
Power-on Value |
Yes |
|
Digital Input |
|
Channels |
1 |
|
Contact |
Dry |
|
Sink/Source (NPN/PNP) |
Source |
|
ON Voltage Level |
Close to GND |
|
OFF Voltage Level |
Open |
|
Counter (50 Hz, 16-bit) |
Yes |
|
Input Impedance |
3 kΩ |
|
Overvoltage Protection |
±30 VDC |
|
Digital Output |
|
Channels |
4 |
|
Type |
Open Collector |
|
Sink/Source (NPN/PNP) |
Sink |
|
Load Voltage |
+3.5 ~ +50 VDC |
|
Max. Load Current |
30 mA/Channel |
|
Power-on Value |
Yes |
|
Safe Value |
Yes |
|
System Specificaiton
|
Models |
I-7016P |
I-7016PD |
|
Communication |
|
Interface |
RS-485 |
|
Bias Resistor |
No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) |
|
Format |
N, 8, 1 |
|
Baud Rate |
1200 to 115200 bps |
|
Protocol |
DCON |
|
Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
|
LED Indicator/Display |
|
System LED Indicator |
Yes, 1 as Power/Communication Indicator |
|
I/O LED Indicator |
- |
|
7-Segment LED Display |
- |
Yes |
|
Isolation |
|
Intra-Module Isolation, Field-to-Logic |
3000 VDC |
|
EMS Protection |
|
ESD (IEC 61000-4-2) |
4 kV Contact for each Terminal |
|
8 kV Air for Random Point |
|
EFT (IEC 61000-4-4) |
±4 kV for Power Line |
|
Power |
|
Reverse Polarity Protection |
Yes |
|
Input Range |
+10 ~ +30 VDC |
|
Consumption |
1.3 W |
|
Mechanical |
|
Dimensions (L x W x H) |
123 mm x 72 mm x 35 mm |
|
Installation |
DIN-Rail or Wall Mounting |
|
Environment |
|
Operating Temperature |
-25 to +75°C |
|
Storage Temperature |
-40 to +85°C |
|
Humidity |
10 to 95% RH, Non-condensing |
Download
Manual
Data sheet
Software
Addressing Map
FAQ
Certification
Odering information
|
I-7016P CR |
1-channel Strain Gauge Input Module using the DCON Protocol (6-wire) (Blue Cover) (RoHS) |
|
I-7016PD CR |
I-7016P with 7-segment LED Display (6-wire) (Blue Cover) (RoHS) |
